NEC MD211G5, MD211G5-N1, MD211G5-A1, MDG5-BNDN1 Owner's Manual

MD211G5

Disclaimer

* Windows and MS-DOS are trademarks and/or registered trademarks of Microsoft Corporation in the United States and/or
other countries.
* VESA is a trademark of the Video Electronics Standard Association.
* All other products and company names are trademarks of their respective owners.

English

Index

Registration Information ...............................................................................................................English-2

Intended Use ................................................................................................................................English-4

Recommended use ......................................................................................................................English-5

Contents .......................................................................................................................................English-7

Quick Start ....................................................................................................................................English-8

Controls ........................................................................................................................................English-10

OSD (On Screen Display) ............................................................................................................English-10

Specifi cations ...............................................................................................................................English-11

Troubleshooting ............................................................................................................................English-11

Additional Installation Information ................................................................................................English-12

Manufacturer’s Recycling and Energy Information .......................................................................English-18

Symbol Information

This symbol warns user that uninsulated voltage within the unit may have suffi cient magnitude to
cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside
this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of

CAUTION

this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

English

Protective earth terminal marked.

Stand by.

AC Input.

Main Power On.

Main Power Off.

Authentication sign of Standard Inspection Bureau for U.S.A.
Complies with ANSI/AAMI ES60601-1:2005
CAN/CSA-C22.2 No. 60601-1:08

Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation.
ErgoDesign is a registered trademark of NEC Display Solutions, Ltd. in Austria, Benelux, Denmark, France, Germany, Italy,
Norway, Spain, Sweden, U.K.

®

Adobe

is a registered trademark or trademark of Adobe Systems Incorporated in the U.S. and/or other countries.

All other brands and product names are trademarks or registered trademarks of their respective owners.

English-1

Registration Information

Declaration of the Authorized Representative

Declaration

Declaration of the Authorized Representative

Means of Conformity

Device Classifi cation: Class I, non-measuring function

Applicable Rules: Annex IX, Rules 1.4 (Section 1)
and 1.1 (Section 3)

Product Name: MD211G5

21.3” Diagnostic Imaging LCD Monitor

Model Number: MD211G5

UMDNS Code: 16-603

NEC Display Solutions Europe GmbH declares that the product
listed is in conformity with the essential requirements and
provisions of the Council Directive 93/42/EEC, including the
amendments of the Council Directive 2007/47/EC, and conforms
to the applicable clauses of the following standards:

– EN 60601-1
– EN 60601-1-2
– EN 61000-3-2
– EN 61000-3-3

NEC Display Solutions Europe GmbH
Landshuter Allee 12-14. 80637 Muenchen, Germany

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA-C22.2 No. 60601-1:08.

FCC Information

1. Use the attached specifi ed cables with the MD211G5 grayscale monitor so as not to interfere with radio and television reception.

(1) Please use the supplied power cord or equivalent to ensure FCC compliance.

(2) Please use the supplied shielded DVI-D or DisplayPort video signal cable.
Use of other cables and adapters may cause interference with radio and television reception.

2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.
The user may fi nd the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve
Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Offi ce, Washington, D.C., 20402,
Stock No. 004-000-00345-4.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.
Address: 500 Park Boulevard, Suite 1100
Itasca, Illinois 60143
Tel. No.: [phone]

Type of Product: Display Monitor

Equipment Classifi cation: Class B Peripheral

Model: MD211G5

We hereby declare that the equipment specifi ed above conforms

to the technical standards as specifi ed in the FCC Rules.

Classifi cation

* Type of protection against electric shock: CLASS I equipment
* Degree of protection against electric shock: No applied part
* Degree of protection against ingress of water as detailed in the current edition of IEC529: IPX0 - No protection
* Method of sterilization or disinfection recommended by the manufacturer: Not Specifi ed
*

This device is not suitable for use in the presence of a fl ammable Anaesthetic Mixture with Air, Oxygen or Nitrous Oxide: No AP or APG category
* This device shall not be used in the vicinity of the patient, which is the space with surfaces likely to be contacted by the patient or an attendant
who can touch the patient. This encloses a space within the room 1.83 m (6 feet) beyond the perimeter of the bed in its intended location, and
extending vertically 2.29 m (7-1/ 2 feet) above the fl oor.
* Mode of operation: Continuous operation, maximum 16 hours/7 days

English-2

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

CAUTION

THIS APPARATUS MUST BE EARTHED BECAUSE OF CLASS I EQUIPMENT.
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET.
DO NOT REMOVE COVER (OR BACK COVER). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

Power Cord Important Information

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not

supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
When you use this Display in North America, you should use a North America Hospital Grade power cord.

English

Plug Type North America

Plug Shape

Country

Voltage

(green dot
and tag label)

U.S.A./Canada U.K. China JapanEU (except U.K.)

120 230 220 100230

European

Continental

U.K. Chinese Japanese

NOTE: This product can only be serviced in the country where it was purchased.

English-3

Intended Use

The MD211G5 grayscale display is intended to be used for displaying and viewing of digital images for diagnosis, including
digital mammography, by trained physicians.
Caution: The MD211G5 grayscale display cannot be used for a life-support system.
This device is designed as component of a fi nal system which is in compliance to IEC 60601-1-1 requirements.

Contraindications: None known.

Safety Precautions

This device is designed for exclusive interconnection with IEC 60950 certifi ed equipment outside of patient vicinity.

• Equipment connected to digital interfaces must comply with the respective IEC standards (e.g. IEC 60950 for data processing

equipment and IEC 60601-1 for medical equipment).

• This device complies with IEC 60601-1-2. To minimize the interference from other equipment, a minimum 0.5 m distance shall

be kept form other potential electromagnetic sources, such as a Cell Phone.

• To reduce the risk of electric shock, make sure that the power cord is unplugged from wall socket. To fully disengage the

power to the unit, please disconnect the power cord from the AC outlet. Do not open the back cover. No user serviceable parts
inside. Refer servicing to qualifi ed service personnel. The AC outlet shall be readily available and accessible.

EMC Precaution

This product requires special EMC precautions and needs to be installed and used according to the following information.
Use the specifi ed cable. Using other cables could increase emission or decrease immunity.
Do not place any RF communication equipment in the vicinity of this product. It could affect the performance of the product.
Any additional equipment connected to this product needs to comply with the requirements of IEC 60601-1-2.

North America Customers

Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle, marked “Hospital Only”
or “Hospital Grade”. That signal input port need to be connected properly and that any unused signal input port shall not be
accessible for the patient to contact in the patient area after the LCD is integrated into a medical system.
Federal law restricts this device to sale by or on the order of a licensed healthcare practitioner.

European Customers

Unpacking, Installation and calibration of this display should only be done by authorized and trained personnel. Any installation
done by a non-authorized person is done under his own risk and we accept no responsibility in any device malfunctioning. To
secure full functionality of this display, only NEC approved display controller models for connection with the fi nal system must be
used.

Medical Imaging

MD211G5 is designed for 2048 x 2560 medical imaging.

English-4