NEC LCD1570NX User Manual

User's Manual
MultiSync LCD1570NX

Index

Warning .................................................................................................................... 1

Contents ................................................................................................................. 2

Display Setup ......................................................................................................... 3

Mounting ................................................................................................................. 7

Flexible Arm Installation .................................................................................... 8

Controls .................................................................................................................. 9

Recommended Use ............................................................................................... 11

Specifications ....................................................................................................... 13

Features ................................................................................................................ 14

Troubleshooting ................................................................................................... 15

References .............................................................................................................16

Limited Warranty ................................................................................................. 17

TCO’99 .....................................................................................................................18

TCO’03 .................................................................................................................... 20

Manufacturer’s Recycling and Energy Information .................................... 21

Avertissement ..................................................................................................... 23

Contenu ................................................................................................................. 24

Configuration de I’affichage ............................................................................ 25

Montage ................................................................................................................ 29

Commandes ........................................................................................................... 31

Usage recommandé ............................................................................................ 33

Fiche technique ................................................................................................... 36

Fonctions .............................................................................................................. 37

Dépannage ............................................................................................................ 38

Références ........................................................................................................... 39

Garantie limitée ..................................................................................................40

TCO’99 .................................................................................................................... 41

TCO’03 .................................................................................................................... 43

Informations du fabricant relatives au recylage et aux économies d’énergie ...... 44

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE
THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS
CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM

WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER
CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This

symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this
unit has been included. Therefore, it should be read carefully in order to avoid any problems.

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations

according to

CAN/CSA C22.2 No. 60950-1.

FCC Information

1.Use the attached specified cables with the MultiSync® LCD1570NX™ (L154G9)
color monitor so as not to interfere with radio and television reception.

(1)

Please use the supplied power cord or equivalent to ensure FCC compliance.

(2) Please use the supplied shielded video signal cable.

Use of other cables and adapters may cause interference with radio and
television reception.

2.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician
for additional suggestions. The user may find the following booklet, prepared by the Federal
Communications Commission, helpful: ”How to Identify and Resolve Radio-TV Interference
Problems.“ This booklet is available from the U.S. Government Printing Office, Washington,
D.C., 20402, Stock No. 004-000-00345-4.

1

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM1

Contents

Your new NEC MultiSync® LCD monitor box* should contain the
following:

•

MultiSync LCD1570NX monitor with height adjustable stand

• Power Cord • User’s Manual

• Video Signal Cable • Cable Management Cover

Power Cord

Video Signal Cable

Cable

Management

Cover

User's Manual
MultiSync LCD1570NX

User’s Manual

* Remember to save your original box and packing material to transport or ship the monitor.

2

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM2

Display Setup

To attach the MultiSync® LCD monitor to your system, follow these instructions:

1. Turn off the power to your computer.

2.

For the PC or MAC with DVI digital output

included) to the connector of the display card in your system (Figure 1). Tighten all
screws.

For the PC with Analog output

connector of the display card in your system (Figure 2). Tighten all screws.

For MAC setup

15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure 3). Tighten all
screws.

NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC Display Solutions
of America, Inc. at [phone].

3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift

up to the highest position (Figure 4).

4. Connect all cables to the appropriate connectors (Figure 4).

5. Place DVI cable, D-Sub cable and power cable between bosses indicated in Figure 5

6. Make sure all cables are resting flat against the stand (Figure 5).

7. Hold all cables firmly and place the cable cover onto the stand (Figure 6). To remove

the cable cover, lift the cover off as shown in Figure 7.

8. Connect the power cord to the power outlet (Figure 8).

NOTE: If you use this monitor at AC125-240V, please refer to Recommended Use
section of this manual for proper selection of power cord.

9. The vacation switch on the back side of the monitor must be turned on (Figure 8).

Turn on the monitor with the front power button and the computer.

NOTE: The vacation switch is a true on/off switch. If this switch is on the OFF
position, the monitor cannot be turned on using the front button. DO NOT switch
on/off repeatedly.

10. Analog input only: No-Touch Auto Adjust automatically adjusts the monitor to optimal

settings upon initial setup for most timings. For further adjustments, use the following

®

OSM

• Auto Adjust Contrast • Auto Adjust
Refer to the Controls section of this User ’s Manual for a full description of these

OSM controls.

NOTE: For download information on the Windows

your monitor, refer to the References section of this User’s Manual.

NOTE: If you have any problems, please refer to the Troubleshooting section of this

User’s Manual.

: Connect the Macintosh cable adapter to the computer, then attach the

controls:

: Connect the 15-pin mini D-SUB signal cable to the

: Connect the DVI signal cable (not

®

95/98/Me/2000/XP INF file for

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM3

3

Display Setup –continued

Figure 1 Figure 2 Figure 3

DVI Signal Cable

(not included)

Figure 4

Highest

Stand

Position

Macintosh Cable Adapter (not included)

Note: Some Macintosh systems do not require a
Macintosh Cable Adapter

30˚ Tilt

DVI Cable

D-Sub Cable

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM4

4

Display Setup –continued

Figure 5

Figure 6

Figure 8

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM5

Power Button

5

Figure 7

Vacation

Switch

OFF Position

ON Position

Display Setup –continued

Raise and Lower Monitor Screen

The monitor may be raised or lowered. To raise or lower screen, place hands on
each side of the monitor and lift or lower to the desired height (Figure RL.1).

NOTE: Handle with care when raising or lowering the monitor screen.

Figure RL.1

Tilt and Swivel

Grasp both sides of the monitor screen with your hands and adjust the tilt and
swivel as desired

NOTE: Handle with care when tilting and swiveling the monitor screen.

(Figure TS.1)

.

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM6

Figure TS.1

6

Mounting

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1. Place hands on each side of the monitor and lift up to the highest position.

Remove the cable cover (Figure M.1).

2. Disconnect all cables.

3. Place hands on each side of the monitor and tilt the LCD Panel back 5˚

(Figure M.2).

4. Remove the hinge cover (Figure M.3).

5. Place monitor face down on a non-abrasive surface (Figure M.4).

6. Remove the 4 screws connecting the stand to the monitor (Figure M.4).

7. Lift up the stand to unlatch the lower hooks and remove the stand

(Figure M.5). The monitor is now ready for mounting in an alternate manner.

8.

Connect the cables to the back of the monitor.

9. Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method.

Handle with care when removing stand.

Figure M.1

Figure M.4

-5˚ Tilt

Figure M.2

7

Figure M.3

Highest

Stand

Position

Figure M.5

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM7

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor
to a flexible arm:

1. Follow the instructions on how Remove Monitor Stand for Mounting to

remove the stand.

2. Using the 4 screws from the stand removal and attach the arm to the monitor

(Figure F.1).

NOTE

: The LCD monitor should only be used with an approved arm (e.g. GS mark). To

meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.

Thickness of Bracket (Arm)

Figure F.1

75mm

2.0~3.2mm

4 Screws (4M)
(Max Depth: 8.5mm)

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM8

75mm

Weight of LCD assembly: 2.8kg (MAX)

8

Controls

OSM® (On-Screen Manager) control buttons on the front of the monitor function
as follows:

To access OSM menu, press any of the control buttons (
To change signal input, press the SELECT button.
NOTE: OSM must be closed in order to change signal input.

Button Menu

MENU/EXIT Exits the OSM controls.

Exits to the OSM main menu.

Left/Right Moves the highlighted area left/right to select control menus.

Moves the bar left/right to increase or decrease the adjustment.

Down/Up

SELECT
RESET Resets the highlighted control menu to the factory setting.

NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear
allowing you to cancel the RESET function by pressing the MENU/EXIT button.

Moves the highlighted area down/up to select one of the controls.
Active Auto Adjust function. Enter the OSM sub menu.

Brightness/Contrast Controls

BRIGHTNESS

Adjusts the overall image and background screen brightness.

CONTRAST

Adjusts the image brightness in relation to the background.

AUTO CONTRAST

Adjusts the image displayed to optimal settings.

Auto Adjust

Automatically adjusts the Image Position, H. Size and Fine settings.

Image Controls

LEFT / RIGHT

Controls Horizontal Image Position within the display area of the LCD.

DOWN / UP

Controls Vertical Image Position within the display area of the LCD.

H.SIZE

Adjusts the horizontal size by increasing or decreasing this setting.

FINE

Improves focus, clarity and image stability by increasing or decreasing this setting.

(Analog input only)

(Analog input only)

(Analog input only)

AccuColor® Control Systems

AccuColor® Control Systems: Six color presets select the desired color setting (sRGB
and NATIVE color presets are standard and cannot be changed).
R,G,B: Increases or decreases Red, Green or Blue color depending upon which is
selected. The change in color will appear on screen and the direction (increase or
decrease) will be shown by the bars.

9

MENU/EXIT,

Left, Right, Down, Up).

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM9

Controls –continued

NATIVE:
sRGB: sRGB mode dramatically improves the color fidelity in the desktop environment by a

single standard RGB color space. With this color supported environment, the operator could
easily and confidently communicate color without further color management overhead in the
most common situations.

Original color presented by the LCD panel that is unadjustable.

Tools

OFF TIMER: Monitor will automatically power-down when the end user has selected a
predetermined amount of time.
HOT KEY: You can adjust the brightness and contrast directly. When this function is set to
ON, you can adjust the brightness with
control while the OSM menu is off.
FACTORY PRESET: Selecting Factory Preset allows you to reset all OSM control settings back
to the factory settings. The RESET button will need to be held down for several seconds to take
effect. Individual settings can be reset by highlighting the control to be reset and pressing the
RESET button.

left or right control

and contrast with up or down

Menu Tools

LANGUAGE: OSM® control menus are available in eight languages.
OSM LEFT/RIGHT: You can choose where you would like the OSM control

image to appear horizontally on your screen.
OSM DOWN/UP: You can choose where you would like the OSM control image to appear
vertically on your screen.
OSM TURN OFF: The OSM control menu will stay on as long as it is in use. In the OSM Turn
Off submenu, you can select how long the monitor waits after the last touch of a button to
shut off the OSM control menu.
OSM LOCK OUT: This control completely locks out access to all OSM control functions
without Brightness and Contrast. When attempting to activate OSM controls while in the
Lock Out mode, a screen will appear indicating the OSM controls are locked out. To
activate the OSM Lock Out function, press SELECT, then right control button and hold down
simultaneously. To deactivate the OSM Lock Out, press SELECT, then left control button and
hold down simultaneously while in the OSM menu.
RESOLUTION NOTIFIER: This optimal resolution is 1024 x 768. If ON is selected, a message
will appear on the screen after 30 seconds, notifying you that the resolution is not at 1024 x

768.

Information

The Information menu indicates the current input, display resolution, horizontal and vertical
frequency, and polarity settings of the monitor. The model and serial numbers of your monitor
are also indicated.

OSM Warning

OSM Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync.

After power is turned on or when there is a change of input signal, the No Signal window
will appear.
RESOLUTION NOTIFIER: his function gives a warning if a resolution other than the optimal
resolution is used. After power is turned on or when there is a change of input signal or the
video signal doesn’t have proper resolution, the Resolution Notifier window will open. This
function can be disabled in the Menu Tools.
OUT OF RANGE: When input signal uses a resolution that is not supported or the horizontal
or vertical frequency is outside of the monitor’s specification, the Out of Range message will
appear.

10

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM10

Recommended Use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND USING

THE MULTISYNC

• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or

removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to
qualified service personnel.

• Do not spill any liquids into the cabinet or use your monitor near water.

• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage

points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.

• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall,

causing serious damage to the monitor.

• When operating the MultiSync LCD monitor with its AC 125-240V power supply, use a power

supply cord that matches the power supply voltage of the AC power outlet being used. The power
supply cord you use must have been approved by and comply with the safety standards of your
country. (Type H05VV-F should be used in Europe)

• In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use

with this monitor. If a power cord is not supplied with this monitor, please contact your supplier.

• Do not place any objects onto the monitor and do not use the monitor outdoors.

• The inside of the flourescent tube located within the LCD monitor contains mercury.

Please follow the bylaws or rules of your municipality to dispose of the tube properly.

• Do not bend power cord.

• Do not use monitor in high temperatured, humid, dusty, or oily areas.

• Do not cover vent on monitor.

Immediately unplug your monitor from the wall outlet and refer servicing to qualified service
personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following operating instructions.

• If glass is broken, handle with care.

• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

CAUTION

• Allow adequate ventilation around the monitor so that heat can properly dissipate. Do

not block ventilated openings or place the monitor near a radiator or other heat
sources. Do not put anything on top of monitor.

• The power cable connector is the primary means of detaching the system from the

power supply. The monitor should be installed close to a power outlet which is easily accessible.

• Handle with care when transporting. Save packaging for transporting.

®

LCD COLOR MONITOR:

Image Persistence

Please be aware that LCD Technology may experience a phenomena known as Image Persistence.
Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on
the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant
images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was
displayed. For example, if an image was on the monitor for one hour and a residual image
remains, the monitor should be turned off for one hour to erase the image.

As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving
images and using a moving screen saver at regular intervals whenever the screen is idle or turning
off the monitor when not in use.

11

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM11

Recommended Use –continued

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR

CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE

FOLLOWING WHEN YOU POSITION THE MONITOR:

• For optimum performance, allow 20 minutes for

warm-up.

•

Adjust the monitor height so that the top of the screen is at or
slightly below eye level. Your eyes should look slightly downward
when viewing the middle of the screen.

•

Position your monitor no closer than 16 inches and no further
away than 28 inches from your eyes. The optimal distance is
20 inches.

• Rest your eyes periodically by focusing on an object at least

20 feet away. Blink often.

• Position the monitor at a 90° angle to windows and other light

sources to minimize glare and reflections. Adjust the monitor
tilt so that ceiling lights do not reflect on your screen.

• If reflected light makes it hard for you to see your screen, use an anti-glare filter.

• Adjust the monitor’s brightness and contrast controls to enhance readability.

• Use a document holder placed close to the screen.

• Position whatever you are looking at most of the time (the screen or

reference material) directly in front of you to minimize turning your head
while you are typing.

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the following:

•

Use the preset Size and Position controls with standard signals

•

Use the preset Color Setting

•

Use non-interlaced signals with a vertical refresh rate between 60-75Hz

•

Do not use primary color blue on a dark background, as it is difficult to see and
may produce eye fatigue to insufficient contrast.

For more detailed information on setting up a healthy work environment, write the American National
Standard for Human Factors Engineering of Visual Display Terminal Workstations – ANSI-HFS
Standard No. 100-1988 – The Human Factors Society, Inc. P.O. Box 1369, Santa Monica,
California 90406.

Cleaning the LCD Panel

• When the liquid crystal panel is stained with dust or dirt, please wipe with soft cloth gently.

• Please do not rub the LCD panel with hard material.

• Please do not apply pressure to the LCD surface.

• Please do not use OA cleaner it will cause deterioration or discolor on the LCD surface.

Cleaning the Cabinet

• Unplug the power supply

• Gently wipe the cabinet with a soft cloth

• To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet

and follow with a dry cloth.

NOTE: Many plastics are used on the surface of the cabinet. DO NOT clean with benzene,
thinner, alkaline detergent, alcoholic system detergent, glass cleaner, wax, polish cleaner, soap
powder, or insecticide. Do not touch rubber or vinyl to the cabinet for a long time. These types
of fluids and fabrics can cause the paint to deteriorate, crack or peel.

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM12

12

Specifications

Monitor MultiSync® LCD1570NX™Notes
Specifications Monitor

LCD Module Diagonal : 15.0 inch Active matrix; thin film transistor (TFT)

Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI

Display Colors 16,194,277 Dependent on display card used.

Maximum Left/Right : 80°/80° (CR>5)

Viewing Angles Up/Down : 60°/80° (CR>5)
Synchronization Horizontal : 31.5 kHz to 60.0 kHz Automatically

Range Vertical : 56.0 Hz to 75.0 Hz Automatically
Resolutions Supported 720 x 400*

Active Display Area Horizontal : 304.0 mm/12.0 inches

Power Supply 100 – 240 V ~ 50/60 Hz
Current Rating 0.4–0.2A
Dimensions 336.4 mm (W) x 305.0-380.0 mm (H) x 178.0 mm (D)

Weight 3.8 kg

Environmental Considerations

Viewable Image Size : 15.0 inch liquid crystal display (LCD); 0.297 mm dot

Native Resolution (Pixel Count) : 1024 x 768 pitch; 250cd/m

Sync : Separate sync. TTL Level

Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative*
Sync on Green (Video 0.7Vp-p and Sync 0.3Vp-p)*

1

640 x 480*1 @ 60 Hz to 75 Hz
800 x 600*

832 x 624*
1024 x 768 @ 60 Hz to 75 Hz

Vertical : 228.0 mm/9.0 inches

13.2 inches (W) x 12.0-15.0 inches (H) x 7.0 inches (D)

8.4 lbs

Operating Temperature : 5°C to 35°C/41°F to 95°F

Humidity : 30% to 80%

Feet : 0 to 10,000 Feet

Storage Temperature : -10°C to 60°C/14°F to 140°F

Humidity : 10% to 85%

Feet : 0 to 40,000 Feet

:VGA text

1

@ 56 Hz to 75 Hz

1

@ 75 Hz

...................

450:1 contrast ratio, typical

2

Some systems may not support all modes listed.

NEC DISPLAY SOLUTIONS cites

recommended resolution at 60 Hz for
optimal display performance.

2

2

white luminance;

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is

normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

2

*

If your display is not showing a picture of the SOG and Composite Sync. signal, please contact our hotline for further assistance.

NOTE: Technical specifications are subject to change without notice.

13

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM13

Features

Thin-frame design creates more desktop space for you to work and play, while the flat
screen’s crisp, bright images and crystal-clear text deliver a comfortable viewing
experience.

No Touch Auto Adjust™ automatically adjusts your optimal image settings upon initial
power-on.

®

AccuColor

display to match your personal preference.

Redesigned OSM

screen image.

Control System allows you to change between five color settings on your

®

controls allow you to quickly and easily adjust all elements of your

NaViSet™ software offers an expanded and intuitive graphical interface, allowing you

to more easily adjust OSM

®

display settings via mouse and keyboard.

Height adjustable stand with tilt, swivel and cable management adds flexibility to your
viewing preferences.

The flat screen’s crisp, bright images and crystal-clear text deliver a comfortable
viewing experience.

ErgoDesign® Features: Enhance human ergonomics to improve the working environ­ment, protect the health of the user and save money. Examples include OSM controls for
quick and easy image adjustments, tilt base for preferred angle of vision, small footprint
and compliance with MPRII and TCO guidelines for lower emissions.

®

Plug and Play: The Microsoft

solution with the Windows®95/98/Me/2000/XP

operating system facilitates setup and installation by allowing the monitor to send its
capabilities (such as screen size and resolutions supported) directly to your computer,
automatically optimizing display performance.

®

IPM

(Intelligent Power Manager) System: Provides innovative power-saving methods

that allow the monitor to shift to a lower power consumption level when on but not in
use, saving two-thirds of your monitor energy costs, reducing emissions and lowering the
air conditioning costs of the workplace.

Multiple Frequency Technology: Automatically adjusts monitor to the display card’s
scanning frequency, thus displaying the resolution required.

®

FullScan

Capability: Allows you to use the entire screen area in most resolutions,

significantly expanding image size.
VESA Standard Mounting Interface: Allows users to connect their MultiSync

®

monitor to
any VESA standard third party mounting arm or bracket. Allows for the monitor to be
mounted on a wall or an arm using any third party compliant device.

LCD1570NXmanual051105.pmd 5/11/05, 1:06 PM14

14