NEC LA-1422JMW User Manual

MultiSync

MultiSync

™

™

LCD

LCD

User’s Manual

User’s Manual

Contents 1
Quick Start 2-3
Controls 4-5
Recommended Use 6-7
Specifications 8
Features 9
Troubleshooting 10
References 11
Limited Warranty 12

400V

400V

®

®

78133331 9/25/98, 12:46 PM1

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE
THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS
CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK • DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This

symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this
unit has been included. Therefore, it should be read carefully in order to avoid any problems.

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du

Règlement sur le matériel brouiller du Canada.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations

according to C.S.A. C22.2 No. 950.
Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de sûrele

Canadiens selon CAN/CSA C22.2 No. 950.

FCC Information

1.

Use the attached specified cables with the LA-1422JMW
with radio and television reception.
(1)

Please use the supplied shielded power cable or equivalent to ensure FCC compliance.

(2) Shielded video signal cable.

Use of other cables and adapters may cause interference with radio and television
reception.

2.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment gener­ates, uses, and can radiate radio frequency energy, and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician
for additional suggestions. The user may find the following booklet, prepared by the Federal
Communications Commission, helpful: ”How to Identify and Resolve Radio-TV Interference
Problems.“ This booklet is available from the U.S. Government Printing Office, Washington,
D.C., 20402, Stock No. 004-000-00345-4.

color monitor so as not to interfere

78133331 9/25/98, 12:46 PM2

Contents

That’s right. Simply complete and return this

regisitration, and we’ll send the purchasing party

a check for $25.00 And we’ll also enter you in

our “100,000 Give Away II” for a chance to win

$5,000, $25,00 or $50,000! Thank Uou for your

time, and thanks for

choosing NEC.

Receive a $25

Purchaser Rebate
to thank you for
choosing an

NEC MultiSync

®

LCD Monitor

PRODUCT REGISTRATION

SEE, HEAR AND FEEL THE DIFFERENCE.

™

NEC MultiSync Monitors

Give Away II

Your new NEC Technologies MultiSync® LCD monitor box* should
contain the following:

• MultiSync LCD400V™ monitor, LA-1422JMW, with tilt/swivel base

• Power Cord

• Video Signal Cable

• User’s Manual

• Registration Card

Power Cord

User’s Manual

* Remember to save your original box

and packing material to transport
or ship the monitor.

MultiSync LCD400V
monitor with Video Signal Cable

Quick Start 2-3

Controls 4-5

Recommended Use 6-7

Specifications 8-9

Features 10

Troubleshooting 11

Reference 12

Limited Warranty 13

MultiSync

LCD

User’s Manual

400V

Contents 1

®

Registration Card

1

MultiSync LCD

400V

78133331 9/25/98, 12:46 PM3

Quick Start

To attach the MultiSync® LCD monitor to your system, follow these
instructions:

1. Turn off the power to your computer.

2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable
to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync LCD
(Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the
MultiSync LCD

NOTE: To obtain the MultiSync LCD

call NEC Technologies at [phone].

3. Connect the 15-pin mini D-SUB of the video signal cable to the appropriate connector on
the back of the monitor (Figure C1).

NOTE: Incorrect cable connections may result in irregular operation, damage

display quality/components of LCD module and/or shorten the module’s life.

4. Connect one end of the power cord to the MultiSync LCD Series monitor and the other
end to the power outlet (Figure D.1).

5. Turn on the monitor (Figure E.1) and the computer.

6.

To complete the setup of your MultiSync LCD monitor, use the following OSM™ controls:

• Auto Adjust Contrast

• Auto Adjust

Refer to the Controls section of this User’s Manual for a full description of these OSM controls.
NOTE: If you have any problems, please refer to the Troubleshooting section of

this User’s Manual.

400V Macintosh cable adapter (Figure B.1). Tighten all screws.

400V Macintosh cable adapter,

400V

™

Macintosh

cable adapter to the computer

Figure A.1 Figure B.1

78133331 9/25/98, 12:46 PM4

15-pin
mini D-SUB

Mac Adapter
(not included)

15-pin

mini

D-SUB

2

Quick Start

Figure C.1

Power Switch

78133331 9/25/98, 12:46 PM5

Figure D.1

Figure E.1

3