NEC FP1375X User Manual

MultiSync FP1375X

User’s Manual

Declaration

Declaration of the Manufacturer

We hereby certify that the colour monitor
MultiSync FP1375X (NSZ3101STTUW) is in
compliance with Council Directive 73/23/EEC:

Council Directive 89/336/EEC:

and marked with

English

- EN 60950

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 55024

NEC-Mitsubishi Electric Visual Systems Corporation

4-13-23, Shibaura,

Minato-Ku

Tokyo 108-0023, JAPAN

English-1

Safety Instruction

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG
WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE
COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK • DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS

CAUTION

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may
have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included. Therefore, it
should be read carefully in order to avoid any problems.

VCCI Statement

ENERGY STAR® is a U.S. registered trademark. All other brands and product names are trademarks or

registered trademarks of their respective owners.

As an ENERGY STAR Partner, NEC-Mitsubishi Electric Visual Systems Corporation has determined that
this product meets the ENERGY STAR guidelines for energy efficiency.
The ENERGY STAR emblem does not represent EPA endorsement of any product or service.
All other trademarks mentioned in this manual are the property of their respective owners.

English-2

Canadian Department of Communications
Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA
C22.2 #950.

FCC Information

1. Use the attached specified cables with the MultiSync FP1375X colour monitor so as not to
interfere with radio and television reception.

(1) Please use the supplied power cable or equivalent to ensure FCC compliance.
(2) Shielded video type signal cable.

Use of other cables and adapters may cause interference with radio and television reception.

2. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet, prepared by the Federal
Communications Commission, helpful: “How to Identify and Resolve Radio-TV Interference
Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C.,
20402, Stock No. 004-000-00345-4.
No user serviceable parts inside. Do not attempt to modify this equipment. If modified, your authority
to operate this equipment might be voided by FCC.

English

English-3

Contents

Your new MultiSync FP1375X monitor box* should contain the following:

• MultiSync FP1375X Monitor with tilt/swivel base

• Power cord for E.U.

• Power cord for U.K.

• Video Signal Cable (VGA to DVI-A)

• Video Signal Cable (DVI-D to DVI-D)

• User’s Manual

• USB cable

• CD-ROM:

Includes complete User’s Manual in PDF format and Windows related
files (INF file and colour profile). To see the complete User’s Manual,
Acrobat Reader 4.0 must be installed at your PC.

User’s Manual

Video Signal Cable
DVI-D to DVI-D

Power Cord for E.U.

USB cable

Power cord for U.K.

Video Signal Cable
VGA to DVI-A

CD-ROM

* Remember to save your original box and packing material to transport

or ship the monitor.

English-4

Quick Start

To attach the MultiSync FP1375X monitor to your system, follow these
instructions:

1. Turn off the power to your computer.

2. If necessary, install the display card into your system. For more
information, refer to the display card manual.

3. For the PC Analog output: Connect the VGA to DVI-A signal cable
to the connector of the display card in your system (Figure A.1).
Tighten all screws.

For the PC with DVI digital output: Connect the DVI-D to DVI-D
signal cable to the connector of the display card in your system
(Figure A.2). Tighten all screws.

For the Mac: Connect the Macintosh cable adapter (not included)to
the monitor connector on the Macintosh (Figure B.1). Attach the VGA
end of the captive signal cable to the Macintosh cable adapter on the
computer (Figure B.1). Tighten all screws.

NOTE: Incorrect cable connections may result in irregular

operation, damage display quality/components of CRT
monitor.

English

USB Cable

Detachable
Signal Cable
(VGA to DVI-A)

Figure A.1

DVI-A

VGA

USB Cable

English-5

Detachable
Signal Cable
(DVI-D to DVI-D)

Figure A.2

DVI-D

DVI-D

4. The Windows® 95/98/2000/Me INF file for your MultiSync monitor can
be found on the CD-ROM, delivered with the monitor.

5. Connect one end of the power cord to the MultiSync FP1375X monitor
and the other end to the power outlet (Figure C.1).

6. Turn on the monitor (Figure D.1).

7. Turn on the Computer.

NOTE: If you have any problems, please refer to the

Troubleshooting section of this User’s Manual.

DVI-A

Detachable Signal Cable
(VGA to DVI-A)

Power Outlet

Power Cord

Computer

Figure B.1

Figure C.1

Mac Adapter
(not included)

English-6

VGA

Reset

DVI-I/D-SUB

Power Button

Figure D.1