NcSTAR DGAB User Manual

COMPACT TACTICAL GREEN DOT REFLEX SIGHT

INSTRUCTIONS

Compact Tactical Green Dot Reflex Sight

FEATURES:

 The Green Dot used in this compact reflex sight is easier to see for most shooters, than the

typical red dot found on most of the micro red dot reflex sights found in the market place.

 This Reflex Sight is a tubeless design, giving the shooter a much wider field of view. This

allows the shooter to acquire their targets faster and makes shooting at moving targets
easier.

 The Reflex Sight has sensor that detects the ambient light level and automatically adjusts

the green dot to a brightness level that is appropriate for the lighting condition.

 This Reflex sight is factory designed to be parallax free 40 yards and beyond. This ensures

that the parallax related aiming errors are minimized at 40 yards and longer distances.

 This Reflex Sight has no On/Off Switch. When the plastic cover is placed onto the sight,

the Reflex sight will power down. When you remove the plastic cover, the reflex sight will
adjust the Green dot to the proper brightness level.

INSTALLING THE BATTERY:

Using the supplied Allen wrench, remove the two Allen head bolts located at the top of the reflex sight. Turn the Allen
head bolts counter-clockwise to remove. With the two Allen head bolts removed, you can now separate the upper reflex
sight from the bottom mount. Turn the reflex sight upside down to reveal the battery compartment. Remove and properly
dispose of the old battery. Place a brand new CR2032 3V lithium battery into the battery compartment with the “+”
terminal facing out. Place the reflex sight back onto the mount, making sure you have the threaded holes in the base
oriented properly with the reflex sight bolt holes. Place the two Allen head bolts through the top of the reflex sight and
tighten the bolts clockwise. Check and verify that the green dot is operating correctly. If it is not working, please make
sure that the battery was installed correctly.

MOUNTING ONTO THE FIREARM:

 CAUTION: CAREFULLY FOLLOW ALL OF THE MOUNTING PROCEDURES. FAILURE TO DO SO

MAY CAUSE DAMAGE TO YOUR REFLEX SIGHT OR THE FIREARM

 CAUTION: BE SURE THAT YOUR FIREARM IS UNLOADED AND POINTED IN A SAFE

DIRECTION. PRACTICE SAFE FIREARM HANDLING PROCEDURES AT ALL TIMES.