Page 1
1508
15
TM
Page 2
Page 3
2
FCC NOTICE
CAUTION ON MODIFICATIONS
Page 4
3
PANEL
1 6
2 5
3 4
MIC PRI
1. Mode Button: Press this button to toggle between the various inputs
(LINE AUX, USB, MICRO SD, FM & Bluetooth).
2. Previous Track Button: When in USB/ MICRO SD/Bluetooth mode, press this button to
skip to the previous track. Press and hold it to decrease the volume for USB/ MICRO SD/
Bluetooth. When in FM mode, press this button to tune to the previous station.
Hold it down to reduce the volume for FM.
3. Play/Pause Button: When in USB/ MICRO SD mode, press this button to start or pause
playback. Press and hold it to toggle the repeat modes for USB/ MICRO SD. When in FM
mode, press this button to perform an automatic search.
4. Next Track Button: When in USB/ MICRO SD /Bluetooth mode, press this button to skip to
the next track. Press and hold it to increase the volume for USB/ MICRO SD /Bluetooth.
When in FM mode, press this button to tune to the next station. Press and hold it
to increase the volume for FM.
5. EQ: Press this button to change the equalizer setting in USB/ MICRO SD modes.
6. MIC PRI: Volume of Music or Radio will Mute when speaking into the MIC.
Page 5
4
MICRO SD
USB
LIGHT
DC 9V IN
AUX INPUT
MIC INPUT
REAR PANEL
5
2
1
3
4
6
77
11
9
8
10
1. Volume Control: Turn this dial to adjust the master volume.
2. Treble dial: Turn this to adjust the level of high frequencies.
3. Bass dial: Turn this to adjust the level of low frequencies.
4.
microphone input.
5. Microphone Volume Control: Turn this dial to adjust the volume level of the
microphone input.
6. Power ON/OFF button: Setting the unit to ON will allow the unit to play using the built-in
battery or AC power.
7.
8. AUX Input: Connection for a music player or other audio device with a 3.5 mm plug.
9. USB/ MICRO SD card port: Connect your USB or MICRO SD device here. The speaker
will only play music les from USB/ MICRO SD input only. Do not connect your computer
to the USB port; It will not play les directly from a computer. Important: The USB port
is intended only for data transfer only. Other devices cannot be used with this USB
connection. The use of USB extension cords is not recommended.
10. Microphone Input: Connection for a microphone with a 1/4 inch plug.
11. DC 9V IN: Connection to a 9V adapter.
4
MICRO SD
USB
LIGHT
DC 9V IN
AUX INPUT
MIC INPUT
REAR PANEL
5
2
1
3
4
6
77
11
9
8
10
1. Volume Control: Turn this dial to adjust the master volume.
2. Treble dial: Turn this to adjust the level of high frequencies.
3. Bass dial: Turn this to adjust the level of low frequencies.
4.
microphone input.
5. Microphone Volume Control: Turn this dial to adjust the volume level of the
microphone input.
6. Power ON/OFF button: Setting the unit to ON will allow the unit to play using the built-in
battery or AC power.
7.
8. AUX Input: Connection for a music player or other audio device with a 3.5 mm plug.
9.
10. Microphone Input: Connection for a microphone with a 1/4 inch plug.
11. DC 9V IN: Connection to a 9V adapter.
4
MICRO SD
USB
LIGHT
DC 9V IN
AUX INPUT
MIC INPUT
REAR PANEL
5
2
1
3
4
6
77
11
9
8
10
1. Volume Control: Turn this dial to adjust the master volume.
2. Treble dial: Turn this to adjust the level of high frequencies.
3. Bass dial: Turn this to adjust the level of low frequencies.
4.
microphone input.
5. Microphone Volume Control: Turn this dial to adjust the volume level of the
microphone input.
6. Power ON/OFF button: Setting the unit to ON will allow the unit to play using the built-in
battery or AC power.
7.
8. AUX Input: Connection for a music player or other audio device with a 3.5 mm plug.
9.
10. Microphone Input: Connection for a microphone with a 1/4 inch plug.
11. DC 9V IN: Connection to a 9V adapter.
Page 6
5
2
3
4
REMOTE CONTROL
MICROPHONE
5
11
6
12
7
8
9
10
Microphone
ON/OFF
1. POWER: Press this button to turn the unit ON
or OFF.
2. MUTE: Press this button to turn the audio
On/OFF.
3. MODE: Press this button to toggle between
the various inputs for LINE AUX, USB, Micro SD,
FM, Bluetooth.
4. EQ: Press this button to change the equalizer
setting in USB/Micro SD modes.
5. Previous Track: Press this button to skip to
the previous track/station in USB/ Micro SD/FM
mode.
6. Next Track: Press this button to skip to the
next track/station in USB/ Micro SD/FM mode.
7. PLAY/PAUSE: Press this button to play or
pause the track.
8. VOL-: Press this button to decrease the
volume.
9. VOL+: Press this button to increase the
volume.
10. Keypad for selecting a track number in USB/ Micro SD modes.
11. REP: Press this button to repeat one/repeat all tracks.
12. STOP: Press this button to stop the track. Press the
button to continue playback.
1. To prevent damage to the microphone, do not turn
on the microphone before setting the microphone
Volume dial to zero (0). Then turn on the microphone
and slowly increase the microphone volume.
2. If you notice static or distortion in the microphone,
please make sure the XLR cable is connected to the
microphone securely and that the ECHO level is set to a
reasonable level.
3.
Page 7
6
SUPPORT
Use Bluetooth mode to stream music from a Bluetooth enabled player
(e.g., smartphone or tablet device). A device must be paired with the unit before using
1. Make sure Bluetooth is enabled on your device and that it is next to the unit
before attempting to pair it.
2. Turn on the unit and set it to Bluetooth mode (press the MODE button). The unit
3. Use your device to search for nearby Bluetooth devices. The speaker will be
listed as “SOUND PRO NDS-1508” (This function is usually in the Bluetooth
settings menu; refer to your device’s instruction manual to learn more.)
4. Select "SOUND PRO NDS-1508" from the list of found/available devices. If your
device asks for a passcode, use “0000” to complete the pairing process.
PAIRING A BLUETOOTH DEVICE
866.411.6292
Page 8
7
Loading...