Naxa NX-548 User Manual

USER MANUAL

DIGITAL PHOTO FRAME

Model: NX-548

Please read these instructions before you operate the unit

Manufacturer of this unit follows a principle of constant improvement and is not held responsible for any changes that are made to the unit nor accepts any liabilities for these changes. Thanks for your choice of our products.

REMOTE CONTROL

1. Mode button

3 4

5 6

7 8

Power supply

Plug one end of the AC adaptor into the DC input jack, then plug the other end into AC wall outlet.

Phone jack

For private listening, insert a headphone or earphone into the phone jack. CAUTION: Listening at high power for a long moment could damage users' ears.

2. OSD button

3. Menu button

4. Navigation up button

5. Navigation left button

6. Enter button

7. F.BWD & previous button

8. Navigation down button

9. Volume+ button

10. Mute button

11. Power button

12. Play/pause button

13. Stop button

14. Navigation right button

15. F.FWD & next button

16. Volume- button

13 14

MAIN UNIT

1. Snooze/Alarm off button

2. Mode button

3. Navigation left button

4. Navigation right button

5. Navigation up button

6. Navigation down button

7. Return button

8. Play/Enter button

9. Power button

23456789

USB slot

Insert a USB data traveller into the USB port to enjoy the audio files or pictures. When you need to unplug the USB, please enter the main menu firstly, then unplug the USB data traveller.

SD/MMC/XD/MS

10. USB port

11. TFT display(screen)

12. Remote sensor

13. SD/MMC/XD/MS slot

14. DC jack

15. Phones jack

16. Hanging hole

17. Speaker

18. Bracket

16 17

Insert an SD/MMC/XD/MS card into the card slot to enjoy the audio files or pictures.

Snooze/Alarm off button

To sleep an extra several minutes when the alarm comes on, lightly touch the SNOOZE/ALARM OFF button, the alarm will stop for several minutes and comes on again. Press and hold SNOOZE/ALARM OFF button about 3 seconds in normal mode to disable the alarm function. (this button works as described above only when the mode option is set to ALARM enabled.)

Play/enter button

Press Play/enter button to start playback or confirm selection.

Basic play

Power on the unit then enter the main menu, the screen shows ten functions, eg: photo, music, photo & music, movie, setup, calendar, clock, alarm, copy/delete and favorite. Insert a USB data traveller or SD/MMC/XD/MS card first, press NAVIGATION BUTTON to select one of the following function.

Photo

Press NAVIGATION buttons to select photo option, then press ENTER to confirm the selection. After the player read it for several seconds, it begins to browse the picture automatically one by one. When photo In auto play off mode, it enters Thumbnail mode directly. During picture playing, press STOP button, thumbnail mode menu appears on the screen as below. Thumbnail of each title: select the thumbnail by using NAVIGATION buttons and press ENTER to play. Information: Resolution, created date, rotate, and slide show Rotate: Highlight the rotate option and press ENTER to confirm, then enter the rotate mode, there are three options appear in the bottom of the screen including Rotate it, Reset and return. Use NAVIGATION buttons to select picture you desired to rotate, then press ENTER to rotate it. Select reset to restore the picture. Select return to back the thumbnail mode.

Slide show: Select slide show option to slide the picture one by one. Press NAVIGATION LEFT and NAVIGATION RIGHT buttons to rotate the picture Clockwise and Anticlockwise respectively. unit to skip the picture ahead or backward. Press STOP button twice to return the file manager. Press NAVIGATION DOWN button to flip the picture vertically. Press NAVIGATION UP button to flip the picture horizontally.

Music

Press NAVIGATION buttons to select music, then press ENTER to confirm the selection, a browse menu appears on the screen and the player begins to play the files automatically, Use NAVIGATION UP/DOWN button to highlight desired file, then press PLAY/PAUSE to play selected file.

Movie

Press NAVIGATION buttons to select movie, then press ENTER To confirm. After the player read it for several seconds, it begins to play movie automatically. Press STOP button to return the root menu during movie playback, press PLAY/PAUSE to resume playback. This unit supports MPEG4 format.

Photo&Music

Press NAVIGATION buttons to select photo & music function and press ENTER to start slideshow the pictures and play the music files synchronously. During picture sliding, to rotate or flip picture by pressing NAVIGATION buttons.

Calendar

Use NAVIGATION buttons to select CALENDAR function and press ENTER to confirm, the calendar will be shown on the display . By now you can adjust the calendar by pressing STOP button. Use NAVIGATION LEFT/RIGHT button to adjust year, use NAVIGATION UP/DOWN button to adjust month, then press STOP button to confirm, use NAVIGATION buttons to select the date and press ENTER to confirm. To exit this function by pressing MENU button.

Clock

Use NAVIGATION buttons to select CLOCK Function and press ENTER to confirm, then the current time will be shown on the screen in big characters, and the current date, month, year and week will be shown under the time in small characters.

Alarm

Use NAVIGATION buttons to select ALARM function. The options of ALARM as follows: Enable: press NAVIGATION UP/DOWN button to make a selection between the two options(on/off) Set time: Select this option to set the alarm time after the alarm is enabled. use NAVIGATION UP/DOWN button to select SET TIME option and press ENTER to confirm, use NAVIGATION LEFT/RIGHT button to highlight the time you desired to set, then use NAVIGATION UP/DOWN button to adjust, press NAVIGATION RIGHT button to confirm and press ENTER To exit the alarm time set. Buzzer will sound at the pre-set alarm time. Exit: select exit option to exit alarm setting.

Copy/Delete

Use NAVIGATION buttons to select Copy/delete function and press ENTER to confirm, select COPY or DELETE to enter the correspond windows to do the file copy or file delete function.

Copy function: when copy function is selected, all JPEG files in the USB data traveller or memory card will be displayed in the file manager. use NAVIGATION UP/DOWN buttons to select the files and press ENTER to confirm, then the selected file will be highlight in a rectangle frame. when the selection is finished, use NAVIGATION buttons to select SAVE to save the selected files into the internal memory of the unit.

Delete function: When DELETE is selected, all JPEG files of you saved will be displayed, use NAVIGATION buttons to select the files that you want to delete from the internal memory and press ENTER to confirm, then the file of you selected will be deleted. Delete all: Press NAVIGATION buttons to select delete all in the bottom menu, all the files in the internal memory will be deleted.

Press and hold NAVIGATION LEFT and NAVIGATION RIGHT buttons on the main

Sort mode: select sort, then use NAVIGATION buttons to select the file that you want to move and press ENTER to confirm. Then press LEFT NAVIGATION button to move the picture to up sequence. (For example, move its sequence from 3rd position to 2nd position.). Press RIGHT NAVIGATION button to move the picture to down sequence. (For example, move its sequence from 3rd position to 4th position.). Press NAVIGATION buttons to select RETURN to return the edit mode, select SLIDE SHOW to browse the pictures one by one. Please note that the saving process may take some time to finish, larger file size will take more time. Please don't remove the USB data traveller or memory card, or turn off the power while in saving, deleting or sorting, it may cause data lose or damage in USB data traveller, memory card or internal memory.

Favorite

Use NAVIGATION buttons to select favorite option, then it begins to browse the files saved in the internal memory one by one. During playback press PLAY/PAUSE to pause, to resume playback press this button again. press NAVIGATION buttons to rotate the picture. During slide show, press STOP button, it enters thumbnail mode. To exit this option by pressing MENU button.

Setup

Select setup option to display setup menu, Use NAVIGATION UP/DOWN keys to select the desired item. Then press NAVIGATION RIGHT button, the sub-options for each item will appear on the right side of the screen.

Photo setting

Interval time To browse picture at interval time. There are several options for you to set as follows: off/5sec./10sec./15sec./30sec./1min./3min. Transition effect To select one of the effects when changing from one picture to another: No effect/Cover up/Cover down/Cover left/Cover right/Uncover up/Uncover down/Uncover left/Uncover right/Wipe up/Wipe down/Wipe left/Wipe right/Push up/Push down/Push left/Push right/random

Auto play

The options of auto play include photo, music and movie.

Display setup

TFT Brightness: to set TFT brightness until desired effect is reached. TFT Contrast: to set the TFT Contrast until desired effect is reached. TFT Saturation: to set the TFT Saturation until desired effect is reached.

Custom setup

OSD language: The OSD language options is depend on the software. Style: select one of following style to display different setup menu style. The option of styles as follows: style1/style2/style3/style4 Repeat mode: select one of following option to do a repeat function: off/ one/ folder/ all. Default: select read to restore the setting.

Set time use NAVIGATION UP/DOWN button to select SET TIME option and press ENTER to confirm, use NAVIGATION LEFT/RIGHT button to highlight the time you desired to set, then use NAVIGATION UP/DOWN button to adjust, press NAVIGATION RIGHT button to confirm and press ENTER To exit the clock time set.

Exit

Select this option to exit the setup menu.

Remote function illustration Power button:

Mode button:

press this button three times to exit.

OSD button:

number ,current file name, and/or play time during movie playback mode).

Press MENU button during playback to return the main menu.

Menu:

Press this button to power on or off the player.

Press MODE button once display clock time, press this button twice display calendar,

Press this button, the screen will display parts of information(current file number, total files

+ 4 hidden pages