Naxa NX-3100 User Manual

iPod Clock Radio

Model NX-3100

INSTRUCTION MANUAL

Operating Instructions

BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND,

AND FOLLOW THESE INSTRUCTIONS.

Be sure to save this booklet for future reference.

SAFETY INSTRUCTIONS

The Lightning flash with arrowhead

symbol, with an equilateral triangle is

intended to alert the user of the

presence of uninsulated dangerous

voltage within the product’s enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

CAUTION : TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING : TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an

equilateral triangle is intended to alert

the user of the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the appliance.

SAFETY INSTRUCTIONS

THESE IMPORTANT SAFETY INSTRUCTIONS ARE INCLUDED, AS APPLICABLE TO THE APPLIANCE,

CONVEYING TO THE USER THE INFORMATION

ITEMIZED BELOW

1. Read instructions-All the safety and operating instructions should be read before the appliance is

operated.

2. Retain instructions-The safety and operating instructions should be retained for future reference.

3. Warnings-All warnings and cautions on the appliance and in the operating instructions should be

adhered to.

4. Follow instructions-All operating and use instructions should be followed.

5. Water and Moisture-The appliance should not be used near water, e.g. near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet basement, or near a swimming pool or the like.

6. Wall or Ceiling Mounting-The appliance should not be mounted to a wall or ceiling.

7. Ventilation-The appliance should be situated in the location or position which does not interfere with

its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug or similar

surface that may block the ventilation openings, or placed in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air through the ventilation openings.

8. Heat-The appliance should be situated away from heat sources such as radiators, heat registers,

stoves, or other appliances (including amplifiers) that produce heat.

9. Power Sources-The product should be operated only with the type of power supply indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operation instructions.

10. Grounding Polarization-This product may be equipped with a polarized alternating current line plug

(a plug having one blade wider than the other). This plug will fit into the power outlet only one way this is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11. Power-Cord Protection-Power supply cords should be routed so that they are not likely to be walked

on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

12. Cleaning-The appliance should be cleaned only as recommended by the manufacturer.

13. Not in use periods-The power cord of the appliance should be unplugged from the outlet when left or

not use for a long period of time.

14. Object and Liquid Entry-Care should be taken so that objects do not fall and liquids are not spilled

into the product case through product openings.

15. Damage for repairing-Unplug this product from the wall outlet and take it to qualified service

personnel under the following conditions.

a) When the power-supply cord or plug is damaged. b) If liquid has been spilled into, or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does not operate when used according to the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may interfere with the product’s normal operation.

e) If the product has been dropped or damaged in any way. f) When the product exhibits a distinct change in performance-this indicates a need for service.

16. Servicing-The user should not attempt to service the product beyond that described in the operating

instruction. All servicing should be referred to qualified service personnel.

17. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines,

or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching power lines or circuits as contact with them might be fatal.

18. If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to

provide some protection against voltage surges and built up static. Section 810 of the National Electrical Code ANSI/NEFA 70 provides information with respect to proper grounding of the mast and supporting structure, grounding conductress, location of antenna-discharge unit, size of grounding electrodes, and requirements for the grounding electrode (see figure).

19. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

20. Lightning-For added protection for this product during a lightning storm, or when it is left unattended

and unused for long period of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

21. Safety Check-Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks to determine that the product is in proper operation condition.

22. Overloading-Do not overloads wall outlets, extension cords, or integral convenience receptacles as

this can result in a risk of fire or electric shock.

NEC NATIONAL ELECTRICAL CODE Do not apply oil or petroleum products to this product.

LOCATION OF CONTROLS

1. VOLUME CONTROL

2. PRESET – BUTTON

3. iPOD PLAY BUTTON

4. SNOOZE BUTTON

5. SLEEP SETTING BUTTON

6. LCD DISPLAY

7. FUNCTION BUTTON

8. POWER BUTTON

9. BAND BUTTON

10. SEARCH CONTROL

11. iPOD CONNECTOR

12. PRESET + BUTTON

13. DC IN JACK

14. EARPHONE JACK

15. AUX OUT JACK

16. AUX IN JACK

17. ALARM SETTING BUTTON

18. TIME/ MEM BUTTON

19. EQ BUTTON

20. BATTERY COMPARTMENT

REMOTE CONTROL

1. EMITTER LED

2. POWER BUTTON

3. iPOD PLAY BUTTON

4. FUNCTION BUTTON

5. ALARM SETTING BUTTON

6. SEARCH + BUTTON

7. VOLUME + BUTTON

8. PRESET + BUTTON

9. EQ BUTTON

10. TIME SET BUTTON / MEMORY BUTTON

11. PRESET – BUTTON

12. VOLUME – BUTTON

13. SEARCH – BUTTON

14. SNOOZE BUTTON

15. SLEEP SETTING BUTTON

16. BAND SELECTION BUTTON

17. BATTERY COMPARTMENT

Insert two “AAA”/1.5V batteries following the polarity as indicated in the compartment to the right.

Alkaline batteries are recommended for long using time.

Note: when planning not to use the remote control for a long time. Remove the batteries in order to avoid

the electrolyte leakage.

UNIT POWER SUPPLY (12V AC adaptor)

The iPOD Clock Radio is powered by DC12V. DC SUPPLY: Connect a direct current 12 Volt power adapter to the DC INPUT JACK located at the back of the iPOD Clock Radio.

BATTERY SAFETY PRECAUTIONS:

z Keep batteries away from children and pets. z Insert the battery observing the proper polarity (+/-). Failure to properly align the battery

polarity can cause personal injury and/or property damage.

z Remove weak or discharged batteries from the product. Remove the battery when the product

will not be used for extended periods of time to prevent damage due to rusted or corroded batteries

z Never throw batteries into a fire, Do not expose batteries to fire or other heat sources z Battery Disposal: weak or discharged batteries must be properly disposed of and recycled in

compliance with all applicable laws. For detailed information, contact your local country solid waste authority.

z Follow the battery manufacturer’s safety, usage, and disposal instructions.

BATTERY BACKUP:

Three 1.5V “AA” batteries (not included) may be installed as a backup option to maintain the time if electrical power fails. In the event of a power outage, the time will not appear on the clock LCD Display, however the clock will continue to operate and the actual time will be maintained. The Clock LCD Display and other functions will resume once electrical power is restored if using the backup battery .The backup battery should be replaced as needed; Remove the battery if the clock is not used or stored for long periods of time.

HEADPHONE JACK

This iPOD Clock Radio will accept stereo headphones with a Ф 3.5mm plug. Before connecting the headphones set the volume to minimum level as not to damage your ears or the headphones. Connect the headphones to the headphones jack. The speakers will be automatically disconnected.

WARNING: Prolonged exposure to high sound levels may permanently damage your hearing.

You may not hear some warning sound while wearing these headphones.

VOLUME CONTROL

Press and hold the VOL + or VOL – Button to the desired volume level.

RADIO OPERATION

RADIO RECEPTION

1. Press Power Button to turn on the iPOD Clock Radio.

2. Press Function Button select to radio.

3. Select AM/FM band by pressing the Band Button. AM and FM are alternately selected each time

when the Band Button is pressed.

4. Radio Tuning

5. Press and hold the “Search +” or “Search -” Button until the display frequency starts run.

6. When a station of sufficient strength has been found. Tuning will stop or you can stop the automatic

tuning by pressing “Search +” or “Search -” Button again.

7. Repeat until you have found the desired station.

8. Adjust the volume to the desired level by pressing VOL+ or VOL- button.

Note:

z For better reception, FM wire antenna shall be fully untied and adjusted well. z This iPOD Clock Radio has a built-in antenna for AM, Locate the iPOD Clock Radio where you

can obtain the best reception.

z The “ST” icon will appear on the LCD display, when receiving station is broadcasted in Stereo.

PRESET TUNING

1. Select the AM/FM band and tune to your desired station according to the normal tuning procedure.

2. Press the TIME/MEM button at the rear cabinet, “CH1 M” will appear and “M” is flashing in the LCD, Then use

“Search +” or “Search –” button to change the number where the station will be stored. (CH.1 to CH.9)

3. Store the current frequency by pressing TIME/MEM button again when you get the desired number.

4. Repeat the same procedure to set other desired frequencies into Memory CH.1 to CH. 9

REMARKS: A stored frequency can only be erased by storing another frequency in its place.

The iPOD Clock Radio can be preset up to 9 stations.

MEMORY RECALL

Recall the stored frequencies by pressing Preset + or Preset - Button to select 1 to 9 station as desired

NOTE: As stored frequencies can only be stored for long time with the power supplying, The station

you stored will be lost and can not be recalled in case that you cut off the AC power

+ 16 hidden pages