naxa NTS-6500K User Manual

65" CLASS LED UHD

Smart TV

MODEL NO.: NTS-6500K

Instruction Manual

PLEASE READ CAREFULLY BEFORE USE

FCC NOTICE

This device compl ies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: ( 1) this device may not c ause harmful interference, and (2) this device must accept
any interference r eceived, including interference t hat may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void t he user’s aut hority to operate the equipment.

NOTE: This equipment has been tested and found to c om ply with the limits for a C lass B digital
device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide responsible
protection agains t harmful interference in a residenti al installation. This equi pment generates,
uses, and can radiate radio frequency and, if not installed and used in accordance with the
instructions , may cause harmful int erference to radio communications.

However, there is no guarantee t hat interference will not occur in a particular installation. If this
equipment does c ause harmful interference to radio or tel evision reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the followi ng m easures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipme nt into an outlet on a circuit different f rom that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

SUPPORT

If you have problems w ith your device, please consult the instructions in t his manual. Please
also visit us on t he w eb at www.naxa.com to get up to the minut e news, alerts, and
documentation for your device. For additional assistance, please contact Naxa Technical
Support.

NAXA Techni cal Support

2320 East 49th St.
Vernon, CA90058
Tel: [phone]
http:/www.naxa.com/naxa_support/

Made in China

2

Safety Information

WARNING

To prevent fire and/or el ectric shock, do not use this plug with an extension cord, receptacle, or
other outlet unles s the blades can be fully inserted to prevent blade expose. Do not expose this
appliance to rain or m oisture.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all inst ructions.

• Please, unplug the TV pow er cord when the following conditions occur:

- When there is a thunderstorm (please, pull out the power cord and antenna).

- When cleaning the TV set.

- When the TV set is not used for a long time.

• Do not use corros ive depurative when cleaning the TV set.

• Do not put the TV set under direct sunlight or near the heat.

• Do not put a heat source, such as a candle or heater, on top or near the TV set.

• Leave plenty of space (at least 10 cm) around the TV set for ventilat ion.

• Place the TV set away from where it can be ruined by rain or water (such as near a window).

• Do not put a container wit h liquid (such as a vase) on top of the TV set.

• Do not move the TV set when the power is on.

• Do not touch, push, or scratch the surface of the TV set with hard materials or items.

• When TV surfaces are dirty, please use a wet cotton cloth or soft cloth with non-corrosive

cleaners to clean i t carefully. Do not use acetone, toluene, or alcohol to clean the TV set.

• Be aware and careful of moisture, whic h can damage inner elect ronic components.

• When condensed moisture is present, the TV screen may appe ar blurry or spotty.

• It is recommended t hat a technician install the TV set on a wall, if such placement is desired.

• An incorrect wall installation will be unsafe and hazardous.

• Do not let childr en climb on or play around the TV s et to avoid falls , collisions, damages, and

injuries.

• Do not hit the TV panel with har d objects to prevent dama ges.

• Do not cover the TV set with blankets or other objects when it is connected to a power source

to prevent overheating and fire.

• Batteries shall not be exposed to excessive heat, such as sunshine, fire, or t he like.

• Mains plug is used as disconnect devic e from the mains, the disconnect device s hall remain

readily operate.

• Apparatus with class 1 construction shall be connected to a mains socket output with a
protective eart hing connection.

3

Important Safety Precautions

SAFETY

Please, immediately pull out the AC power plug if there is an
abnormal sound or s m ell or the LED TV has sound but no
picture, and contac t after sales support.

The LED TV should be kept free from rain,
moisture and dust to prevent electrical shock and
short circuits. D o not cover the ventilat ion
openings with table clothes, curtains, newspapers,
etc.

The LED TV should be kept free from high
temperature heating sources or direct sunlight.
Good ventilation i s required. Allow 10 cm between
the LED TV and other appliances or built-i n cabinet
walls.

When you wipe the fr ont cabinet, please m ake sure the
power plug is pulled out and use a soft, dry, lint-free
cloth and handle it w ith care. Do not repeatedly wipe
the panel, nor scrape, tap, or strike the panel with a
hard object.

Do not wipe the LED TV with an pet rol, chemical or
alcohol based solvents as it will be lead to product
damage of the panel and c abinet.

Do not place the LED TV on an unstable surface.

4

Important Safety Precautions

SAFETY

Do not place the power cord or other cables across a
walkway in case it is trampled on. Do not overload the power
cord or power sock et. When the power plug i s used to
disconnect and connect the device, it should be placed easily
into the power source.

Do not disassembl e the back cover, as it contains
high voltages insi de and will cause electric shock.
Only qualified pr ofessionals should conduct internal
adjustments, maintenance, and checks.

The TV set should not be subjected to water droplets, vapor, or
splash. This equipment should not have objects filled with liquids
placed on it. Do not pl ace flame sources, such as lit candles, on
or near the LED TV. Please, pull out the power plug and contact
after sales support if there are abnormal obj ects or water in the
TV.

Pull out the power cord and antenna cable during
electrical storms so the LED TV is not damaged by
electrical s urges. Keep all people away from the
antenna cable during electrical storms.

Warning (only fo r equipment mass > 7kg):

Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple
precautions s uch as:

- Using cabinets or stands recommended by the manuf acturer of the televi sion set.

- Only using furni ture that can safely support the television set.

- Ensuring the tel evision set is not overha nging the edge of the supporting furniture.

- Not placing the t elevision set on tall furniture (for example, cupboards or bookcases) without

anchoring both the furniture and the t elevision set to a sui table support.

- Not placing the t elevision set on clot h or other materials that may be located betwe en the

television set and supporting furniture.

- Educating chil dren about the dangers of climbing on furnit ure to reach the televis ion set or its

controls.

If your existing television set is bei ng retained and relocated, the same consi derations as
above should be applied.

5

Table of Cont ents

Introduction

7

Features
Specifications

Accessories

General Description

Overview of Front an d Back Panel
Overview of Back Panel
Overview of Remote Control
Installing Batteries in Remote Control
Antenna Connecti on

External Connection

Connecting VCR
Connecting DVD Player/Set-Top Box
Connecting Digital Audio System/Headphone
Connecting USB/Local Area Network
Connecting DVD Player/Set-Top Box via HDMI

Basic Operation

Turning the TV On and Off

OSD Menu Operation

Input Source Selection
First Time Installation
Home of Smart TV
Basic Operation
Picture
Sound
Setting
Lock
Program
Network
About
Channel List

USB Operation

Troubleshooting

Picture Defects and the Reason

7
8

9

9-12
9
10
11
12
12

13-19
13
14
15
16
17

18
18

19-29
19
19
21
22
22
23
24
26
27
28
29
29

30

31

32

6

Introduction

Feature

• TV adopts LED display s creen

• UHD TV compatible (480i, 480 p, 576i, 576p, 720p, 1080i, 1080p, 2160p)

• Support American TV Standard 8VSB/Free 64/256QAM, N TS C System, ATSC System

• Connect to computer directly to reali ze TV/ monitor combo

• Zero X radiation complies to green environment protect ion requirement

• Advanced Chroma Processing

• Closed Captioning/Program Control

• SAP/STEREO/MONO; ATSC

• HDMI Input

• USB Input

Input terminals used for external equi pm ent connection:

Antenna Input x1
Y (CVBS) / Pb / Pr Input x1
Audio L/R Input x1
HDMI Input x3
USB Input x2
LAN Input x1

Output terminals used for external equipment connection:

Optical Output x1
Headphone Output x1

7

Introduction

Specifications

Display Screen Type Color Active Matrix LED Display
Model NTS-6500K
Maximum Resolution 3840 x 2160
Image Control Fine Digital Control
Power Supply AC 100-240V~ 50/60Hz
TV Receiving Syst em NTSC System, ATSC System
Frequency Range Antenna 2~69, Cabl e 2~125
Antenna Input Impe dance 75 Ohms (Unbalance)
Sound Output 2 x 8W
Power Supply (Remote Control) DC 3V (Two AAA) Batteries
Power Consumption 230W
Operation System Linux
DDR Memory 1G
Flash Storage 4G
Dimensions (L x W x H) 57.5 x 11.2 x 35.6 inch
Weight (Net weight) 17 kg
Operation Environment Temperature 0°C - 40 °C

NOTE: Design and speci fication modifications may be made at any time wi thout prior notice; all
data and dimensions are approximations .

8

Batteries (AAA x2)

Accessories

Please make sure that the following items are i ncluded with your LED TV. If any of the following
items are missing, contact your dealer.

General Description

Overview of front and back panel

1. Remote control sensor / power indicator.

2. VOL+/-: Press to increase/decrease the volume. In the on-screen

menu, use to move left/right.

3. CH+/-: Press t o change channels. In the on-scr een m enu, use to

move up/down.

4. MENU: Press to view on-screen menu of your TV.

5. SOURCE: Toggle between all the available input sources.

6. STANDBY: Press to toggle between normal and standb y mode.

Remote Control &

Owner’s Instructions

9

General Description

Overview of back panel

1. Power input (AC)

2. OPTICAL: Connect to a Digital Audio device.

3. LAN (RJ45): Connect to the local networ k through a LAN cable.

4. HDMI 2 / 3: Connect to the HDMI jack of a device wit h a H D M I output.

5. Y (CVBS) / Pb / Pr: Connect to the video (CVBS) or Component (Y/Pb/Pr) of external devices,

such a camcorder or VCR.

6. AUDIO L/R: Audio input for external devices, such as a camc order or VCR.

7. HDMI 1: Connect to the HDMI jack of a device with a HDMI output.

8. ANTENNA INPUT: Connect to an antenna or cable NTSC & ATSC.

9. USB: USB input

10. Headphone output

10