Naxa NCA-692 User Manual

IMPORTANT INFORMATION REQUIRED BY THE FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation .
This equipment generates.uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio elevation reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
MODEL: NCA-692
INSTRUCTION MANUAL
Fold Down Full Detachable PLL Electronic Tuning Stereo AM/FM Radio MP3/CD Player with Text Function, USB/SD Inputs, MP3 (ESP) Anti-shock Protection, Remote Control & Bluetooth
Remark:
1. In addition to normal audio CD, this unit can play CD-R and CD-R/W disc that contain audio tracks as well; however, depending on the conditions of the recording equipment, recording program or the CD-R as well as CD-R/W disc itself, some CD-R or CD-R/W may not play.
2. When making music CD with CD-R or CD-R/W disc, too high recording speed may result in poor signal quality and therefore, it is recommendable to select 24x or lower speed for CD-R recording and 4x or lower speed for CD-R/W recording.
Caution:
!
Although the purpose of applying this Bluetooth system is trying to minimize
the risk of traffic accidence which may take place providing that the driver is engaged in telephone conversation during driving, it might not absolutely prevent the occurrence of serious traffic accidence. Manufacturer of this product is not in the position to responsible to any traffic accidence or problem induced due to the application of this Bluetooth system.
When the product suffered by the transients or surges, it would be loss of function. In order to restore the function of the product, it is necessary to take off the front panel and press reset button two times.
BATTERY INFORMATION OF REMOTE CONTROL
Replace Battery in Remote Control:
1. Before using the remote control for the first time, pull the insulating sheet out of the remote control as the direction indicated by the arrow.(see fig.1)
2. Press the movable block hold as the direction indicated by the A arrow(See fig.2), then pull the battery holder out of the remote control as the direction indicated by the B arrow(see fig.2).
3. Replace the old battery by a new battery with (+) polarity side upward. (See fig.3).
4. Insert the battery holder to the original position in remote control(See fig.3).
+ side up
B
Fig.1
Note about the Battery of Remote Control:
Improper use of battery may cause overheating or explosion. so that result in
1. injury or fire .
2. Battery leakage may cause damage to the remote control. (Battery Life: 6 months with normal use in normal room temperature).
3. Do not short the battery.
4. Do not throw the battery into the fire.
5. To avoid the risk of accident, keep the battery out of reach of children.
Fig.2
A
Fig.3
1
WIRES CONNECTION
BLUETOOTH ANT
BLACK
ANTENNA LINE IN
RCA LINE OUT
LOCATION AND FUNCTION OF CONTROLS
RED R
WHITE L
FUSE 10 A
CONNECTOR A
1.
2.
3.
4. Memory +12V
5. Auto Antenna Output
6.
7. 12V (To Ignition Key)
8. GROUND
ISO SOCKET
CONNECTOR B
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front Right Speaker (+)
4. Front Right Speaker (-)
5. Front Left Speaker (+)
6. Front Left Speaker (-)
7. Rear Left Speaker (+)
8. Rear Left Speaker (-)
ISO SOCKET SKETCH
SPECIFICATION
GENERAL
Power supply requirement....................................................DC 12V
Current consumption..........................................................10A MAX
Maximum power output.......................4 X 25W(Measured at 14.4V)
Number of channels.........................................................2 STEREO
Chassis dimensions...................................178[W] X 50[H] X 165[D]
FM SECTION
Frequency range..................................................
87.5MHz -107.9MHz
Usable sensitivity..........................................................................3uV
I.F Frequency.......................................................................10.7MHz
AM SECTION
Frequency range.................................................530KHz - 1710KHz
I.F Frequency........................................................................450KHz
Usable Sensitivity......................................................................40dB
LINE - OUT
Output........................................................................MAX 1200mV
CD/SD or USB PLAYBACK
System................................................................MP3 audio system
Usable disc.........................................CD/CD-R/CD-RW/MP3/WMA
Frequency response.............................................20-100Hz <= 5dB
10-20KHz <= 5dB
Signal to noise ratio(CD)...............................................50dB [1KHz]
1. SEL button and VOL knob . LCD
2
4. >>| or |<< buttons
3&
5. A.P button
6. BAND button
7. LOU button
8. LOC button
9. POWER button
10. ST button
11. MUTE/CLEAR button
12. TOP/PLAY/PAUSE, INT, RPT,
RDM and 1-6 Number buttons
13. MODE button
14. CLOCK button
15. T-M button
16. TEL button
17. Built-in microphone
18. Bluetooth LED indicator
19. USB port
20. MMC/SD slot
21. AUX INPUT Jack
22. OPEN button
23. EJECT button
24. CD slot
25. Anti-theft LED indicator
26. RESET button
27. Infrared Remote Control Sensor
28. SCAN button
13 2
Loading...
+ 5 hidden pages