Naxa NAS3044 Instruction Manual

Portable Wireless Sound System & MP3 Player

with Bluetooth

®

Model:NAS‐3044

INSTRUCTIONMANUAL

WARNING

TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADES EXPLOSURE.
TO PREVENT FIRE OR SHOCK HAZARD; DO NOT EXPOSE THIS APPLIA NCE T O RAIN OR MOISTURE.

The lighting flash with arrowhead
symbol, with an equilateral
triangle is intended to alert the
user to the presence of
un-insulated dangerous voltage
within the products enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.

CAUTION

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instruction in the literature
accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.

WARNING

y The ventilation should not be impeded by covering the ventilation openings with items,

such as newspapers, tablecloths, curtains, etc.

y No naked flame sources, such as lighted candles, should be placed on the apparatus.
y It shall not be exposed to dripping or splashing and that no objects filled with liquids, such

as vases, shall be placed on the apparatus.

y Do not place the product in closed bookcases or racks without proper ventilation.
y The batteries (Battery pack or batteries installed) shall not be exposed to excessive heat

such as sunshine, fire or the like.

y Excessive sound pressure from earphones and headphones can cause hearing loss.
y Where the mains plug or an appliance coupler is used as the disconnect device, the

disconnect device shall remain readily operable.

- EN 1 -

LOCATION OF CONTROLS

1 DIAL scale 13 ALBUM DOWN button
2 VOLUME dial 14 LCD display
3 FUNCTION switch 15 USB port
4 BAND switch 16 AUX-IN jack
5 TUNING dial 17 SD card slot
6

 button 18 POWER indicator

7 button 19 BLUETOOTH

®

indicator
8 USB/SD button 20 Battery compartment
9 MODE button 21 Antenna

10

 button 22 AC socket

11

 button 23 VOLTAGE selector

12 ALBUM UP button

CONNECTING THE UNIT TO POWER
AC OPERATION
Before operation, please make sure that the VOLTAGE selector [23] is set to the voltage
of your local area. Unwind the AC power cord and then insert one end into the AC socket on

the unit and the other end into a standard AC power outlet.

ATTENTION

1. Do not plug or unplug the power cable while you have wet hands.

2. When planning not to use this unit for a long time, disconnect the power cable from the
wall outlet.

3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to
avoid shock risks caused by damaged cable.

- EN 2 -

BATTERY OPERATION

Disconnect the AC cord set completely. Open the battery compartment door and insert 4 pieces
UM-2 "C" size batteries into the battery compartment. Make sure the polarity of the batteries
match the "+" and "—" markings found inside the battery compartment.

LISTENING TO THE RADIO

1. Set the FUNCTION switch [3] to RADIO position.

2. Set the BAND switch [4] to the desired radio band.

3. Turn the TUNING dial [5] to your desired radio station.

4. Adjust the sound level by turning the VOLUME dial [2].

5. To turn the radio off, set the FUNCTION switch [3] to the OFF position.

PLAYING MP3 FILES FROM SD CARDS OR USB MEMORY STICKS

1. Slide the FUNCTION switch [3] to USB/SD position

2. Insert your SD card into the SD card slot [17] or plug your USB stick into the USB port [15]
of the unit.

3. The unit will read the MP3 files on your SD/USB memory device and will start playing the
first compatible MP3 files it detects.

4. Press the

 button [11] to skip to the next track.

5. Press the

 button [10] to go back to the previous track.

6. Press the ALBUM UP button [12] to go to the next folder.

7. Press the ALBUM DN [13] button to go back to the previous folder.

8. Note: If you insert an SD card while playing MP3s from the USB port, the device will
automatically switch to playing MP3s from the SD card slot (and vice versa).

9. Press the

 button [6] to pause playback. Press the button [6] again to resume

playback.

10. Press the MODE button to toggle the Repeat Play mode in the following sequence:
Repeat ONE D Repeat ALL D Repeat FOLDER D Normal Play.

Note:

MP3 playback quality and performance is dependent on how the file was produced. Naxa™
Electronics cannot guarantee the quality or playback performance of all MP3 files because
production is not standardized. Naxa is not responsible for MP3s that cannot be played due to
recording conditions such as PC performance, encoding software, media ability, and other
factors.

AUX-IN CONNECTION

1. Set the FUNCTION switch [3] to the BT/AUX position.

2. Connect the headphone or line-out jack of your playback device to the AUX-IN jack [16] of
the unit with an AUX cable (male-to-male 3.5mm stereo plug, not supplied). Typical
playback devices include MP3 players, smartphones, tablets, and laptops.

3. Turn on the connected device and start playback according to its manufacturer’s
instructions.

4. To turn off this function, set the FUNCTION switch [3] to the OFF position (and/or turn off
the playback device).

- EN 3 -

BLUETOOTH OPERATION
Wireless audio streaming via BLUETOOTH

®

You will need to pair your playback device with the unit before you can stream audio wirelessly.
To do so:

1. Set the FUNCTION switch [3] to the BT/AUX position. The BLUETOOTH indicator [19] will
start flashing blue continuously

2. Enable Bluetooth on the device you want to connect and set it to “search for devices”.
When it finds “NAS-3044”, select it from the list of found devices. (Enter “0000” if it asks for
a passcode.)

3. When the connection is successful, the Bluetooth indicator [19] will flash every few
seconds.

4. Start playback on the connected device.

5. To turn off BLUETOOTH, set the FUNCTION switch [3] to the OFF position.

Note:

After a device has been paired successfully, the unit will connect to it automatically. Simply turn
on your device with Bluetooth enabled, and then set the FUNCTION switch [3] to the BT/AUX
position.

Different devices with Bluetooth have different ways to enable and search for other Bluetooth
devices. Please refer to the instructions of your particular device if you need further help with
the connection process.

SPECIFICATIONS

Frequency Range: AM: 540 – 1600 kHz
FM: 88 – 108 MHz
Power Supply: AC 110V ~ 60Hz / 220V ~ 50Hz
DC 9V (6 x UM2 “C” size battery)
Batteries are not included.

Specifications are subject to change without prior notice.

SUPPORT

If you have problems with your device, please consult the instructions in this manual, as well as
the latest news, alerts, and documentation that can be found by visiting us on the web at
www.naxa.com. If you need further assistance, please contact Naxa™ Technical Support.

NAXA Technical Support

2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/naxa_support/

- EN 4 -