naxa NAB-4000 Instruction Manual

Instruction Manual

Wireless Audio Adapter with Bluetooth® for

iPod® and iPhone® Dock Connectors

NAB-4000

At a Glance

Dock Connector

Status Indicator

Power Off No light

Searching Slow ashing light

Pairing Quick ashing light

Connected Steady light

Press and hold the Power/Pair button for 3
seconds to turn the unit on or off.

Page 2 Naxa Electronics

Connects the NAB-4000 to compatible iPod
dock speaker systems.

Connecting

1) Set your iPod audio dock to iPod mode.
(Refer to the manual of your iPod audio
dock for instructions.)

2) Connect the NAB-4000 to the iPod audio
dock. The dock connector is found on the
bottom of the unit.

3) The NAB-4000 will turn on automatically
and the status indicator will ash slowly.
A beep will sound when the unit has been
recognized.

Once connected for the rst time, the unit will
turn on automatically. If it does not, press and
hold the Pair button for 3+ seconds to turn it on.

To turn off the unit, press and hold the
Power/Pair button.

www.naxa.com Page 3