NAV-TV W205v2 Install Manual

BHM
07/24/18
NTV-DOC328
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger entertainment only.
1 | P a g e
3950 NW 120th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
www.nav-tv.com info@nav-tv.com
W205v2
NTV-KIT888
Overview
The W205v2 Kit interfaces a backup camera input (with active parking lines) and 1 front camera to the factory media screen in select 2014+ Mercedes vehicles with the new infotainment system. With an additional adapter (NTV-KIT800), this kit will also introduce an HDMI input to the OEM screen.
Kit Contents
Power/CAN T-Harness
A-Type
LVDS Video Cable
W205V2 Interface
OSD Menu remote
IR Receiver
HD-LINK Optional KIT800
BHM
07/24/18
NTV-DOC328
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger entertainment only.
2 | P a g e
Interface Connectors
Dip Switch Settings
DIP SW
1 2 3 4 5 6 7
8
UP
MENU OFF
VEH SET
VEH SET
RVC OFF
VEH SET
VEH SET
VEH SET
KEEP DOWN
DOWN
MENU ON
VEH SET
VEH SET
RVC ON
VEH SET
VEH SET
VEH SET
KEEP DOWN
C-Class with 7Screen
C-Class, GLC with 8.4” Screen
2015 CLS, CLA, GLA,
GLE, B & E-Class
NOTE: Remove power to the unit prior to making adjustments to the dip switches.
NOTE: DIP SWITCH 4 must be DOWN when adding aftermarket rear camera.
Power/CAN
RGB Input
Video OUT (to screen)
Dip Switches
Not Used
Not Used
HDMI Cable from HD-LINK
S-Class with 12.3” Screen
S-Class with 12.3” Screen
(German Import)
Video IN (from radio)
IR Receiver
AV IN (optional)
BHM
07/24/18
NTV-DOC328
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger entertainment only.
3 | P a g e
Dash Removal (’15 C-Class)
1. Use a plastic tool to remove the silver trim behind the COMAND
touchpad controller. You will have to open the center console and press the arm rest locks forwards for clearance:
2. Remove (2x) Torx 20 screws hidden beneath
the silver trim piece in step 1:
3. Lift up the entire dash panel to just beneath the
screen and disconnect all (6) plugs. Set the dash panel aside in a safe place.
4. Unscrew (2x) Torx 20 screws securing the radio to the sub dash. These
screws are not designed to be removed from the radio clamps.
5. Remove the radio by pulling it towards
you.
Loading...
+ 7 hidden pages