NAV-TV W205-N RVC Installation Manual

3950 NW 120th Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

Overview

Kit Contents

Plug & Play Power/CAN Harness

A-Type

LVDS
Video
Cable

W205-N RVC Interface

OSD Menu remote

IR Eye

www.nav-tv.com [e-mail]

W205-N RVC

NTV-KIT703

BHM

10/18/18

NTV-DOC245

The W205-N RVC Kit interfaces a backup camera input (with active parking lines) and 1 front
camera to the factory media screen in select 2015 Mercedes vehicles with the new
infotainment system.

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

1 | P a g e

BHM

Interface Connectors

Dip Switch Settings

DIP SW

1 2 3 4 5

6

UP

KEEP

DOWN

KEEP

UP

VEH

TYPE

DOWN

KEEP

DOWN

KEEP

UP

VEH

TYPE

Power/CAN

Video IN (from radio)

IR Eye

Not Used

CAN 2 Input

Video OUT (to screen)

Not Used

Dip Switches

10/18/18

NTV-DOC245

C-Class with 7” Screen

C-Class with 8.4” Screen

Note: Remove power to the unit prior to
making adjustments to the dip switches.

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

OEM
CAM

Adding

CAM

2015 CLS, CLA, B

C-Class

C-Class

ONLY

& E-Class

NOT

High

RES
Low

RES

2016+ SLC

2015 SL400, 7"

2 | P a g e

Dash Removal (’15 C-Class)

1. Use a plastic tool to remove the silver trim

5. Remove the radio
by pulling it towards

you.

behind the COMAND touchpad controller. You
will have to open the center console and press
the arm rest locks forwards for clearance:

BHM

10/18/18

NTV-DOC245

2. Remove (2x) Torx 20 screws hidden
beneath the silver trim piece in
step 1:

3. Lift up the entire dash panel to just beneath the screen and
disconnect all (6) plugs. Set the dash panel aside in a safe
place.

4. Unscrew (2x) Torx 20 screws securing the radio to the sub
dash. These screws are not designed to be removed from the
radio clamps.

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

3 | P a g e