NAV-TV UConnect-RVC Installation Manual
BHM
10/17/18
NTV-DOC248
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
1 | P a g e
3950 NW 120th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
www.nav-tv.com info@nav-tv.com
UConnect-RVC
NTV-KIT705
Overview
The UConnect-RVC interfaces a backup camera (with dynamic guidelines) and one optional
front camera input to select Chrysler or Dodge vehicles equipped with the UConnect 8.4” or
4.3” infotainment screens (RB5, RE2: 8.4”, REB, RHA: 4.3”).
Kit Content
Power/CAN Harness
B-Type
LVDS-IN
Cable
UConnect-RVC Interface
OSD Menu
IR-Eye
Cable
Optional
Reverse
Trigger
Input
BHM
10/17/18
NTV-DOC248
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 | P a g e
Interface Connectors
Dip Switch Settings
Dip SW:
DYN LINES
2 3 4 5 6
UP
NORMAL
Keep UP
Keep UP
Keep UP
8.4” Screen
Keep DOWN
DOWN
REVERSED
Keep UP
Keep UP
Keep UP
4.3” Screen
Keep DOWN
Note: remove power to the unit prior to making
adjustments to the dip switches.
Not Used
LVDS Video IN
Not Used
LVDS Video OUT
Power/CAN
IR Input
Reverse Trigger
INPUT
Dip Switches
Loading...