NAV-TV RGB-PCM3.1N Installation Guide

BHM

Overview

Kit Content

Power Harness

RGB-PCM3.1N Interface

Remote

(menu control)

IR Receiver

06/06/16

NTV-DOC260

3950 NW 120th Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

www.nav-tv.com [e-mail]

RGB-PCM3.1N

(NTV-KIT749)

The RGB-PCM3.1N interfaces 2 video inputs including a backup camera with dynamic guidelines
to the factory touch screen radio in select Porsches equipped with the PCM3.1 radio. This kit
connects behind the radio following a radio modification. AUX Video Switching is performed
using the ‘NAVI’ button on the radio face (optional).

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

1 | P a g e

BHM

Interface Connectors

Dip Switch Settings

Dip SW:

1 2 3 4 5

6* 7 8

UP

KEEP

UP

Skips

V1

Skips

V2

RVC

OFF

N/A

N/A

N/A

N/A

DOWN

KEEP

UP

Enables

V1

Enables

V2

RVC

ON

N/A

N/A

N/A

N/A

*Note: Disconnect power to the interface before

adjusting dip switches or the change will not be

implemented.

NOT USED

Power/CAN

Dip Switches

RGB Input

Video I/O (cable

from MOD)

NOT USED

NOT USED

IR Receiver

Expansion Board

NOT USED

06/06/16

NTV-DOC260

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

2 | P a g e