Nav TV NTV-KIT703 Install Manual

BHM

Overview

Kit Contents

Plug & Play Power/CAN Harness

LVDS
Video
Cable

W205-N RVC Interface

OSD Menu remote

IR Eye

11/24/15

NTV-DOC245

3950 NW 120th Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

www.nav-tv.com [e-mail]

W205-N RVC

NTV-KIT703

The W205-N RVC Kit allows the user to add a backup camera input (with active parking lines)
and 1 video input (front cam, etc) to the factory media screen in select 2015 Mercedes vehicles
with the new infotainment system.

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

1 | P a g e

Interface Connectors

Dip Switch Settings

DIP SW

1 2 3 4 5

6

UP

KEEP

DOWN

KEEP

UP

OEM

RVC

RVC OFF

RES

TYPE 1

VEH

TYPE

DOWN

KEEP

DOWN

KEEP

UP

ADDING

RVC

RVC ON

RES

TYPE 2

VEH

TYPE

C-Class with 7” Screen

C-Class with 8.4” Screen

2015 CLS, CLA, B & E-Class

*Note: Remove power to the unit prior to making adjustments to the dip switches.

Power/CAN

Video IN (from radio)

IR Eye

Not Used

CAN 2 Input

Video OUT (to screen)

Not Used

Dip Switches

BHM

11/24/15

NTV-DOC245

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

2 | P a g e

Dash Removal (’15 C-Class)

5. Remove the radio
by pulling it towards

you.

1. Use a plastic tool to remove the silver trim

behind the COMAND touchpad controller. You
will have to open the center console and press
the arm rest locks forwards for clearance:

BHM

11/24/15

NTV-DOC245

2. Remove (2x) Torx 20 screws hidden

beneath the silver trim piece in
step 1:

3. Lift up the entire dash panel to just beneath the screen and

disconnect all (6) plugs. Set the dash panel aside in a safe
place.

4. Unscrew (2x) Torx 20 screws securing the radio to the sub

dash. These screws are not designed to be removed from the
radio clamps.

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is

intended for off-road use and passenger entertainment only.

3 | P a g e