NAV-TV MAS-GT Owner's Manual

BHM

Overview

Kit Contents

AV Input

Harness

Power Harness

LVDS Video cable

MAS-GT Interface

Remote

Input Toggle Switch

IR Eye Harness

LCD cable

MAS-GT Sub Interface

12/18/13

NTV-DOC152

3950 NW 120th Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

www.nav-tv.com [e-mail]

MAS-GT

NTV-KIT423

The MAS-GT kit allows the user to add multiple video inputs including backup camera to the
factory media screen in ’08-’13 Maserati GT’s. This installation requires soldering wires behind
the radio and connecting cables behind the screen.

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

1 | P a g e

BHM

MAS-GT Interface Connectors

MAS-GT Sub Interface Connectors

Dip Switch Settings*

Dip SW:

1 2 3 4 5

6 7 8

UP

Enables

RGB

Enables

V1

Enables

V2

Enables

V2

N/A

N/A

Factory or no Rear-

CAM

N/A

DOWN

Skips

RGB

Skips

V1

Skips

V2

Skips

V2

N/A

N/A

Aftermarket Rear-

CAM

N/A

AV IN/OUT

Rear Camera

Power

Power Harness

LCD OUT

(LVDS Cable)

LVDS Cable OUT

Dip Switches

Status LEDs

*Note: after adjusting Dip Switches, you must disconnect
and reconnect power to the interface or the change will
not be implemented.

LVDS Cable IN

OEM LVDS

Cable IN

12/18/13

NTV-DOC152

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

2 | P a g e