NAV-TV GVIF-RR Installation Guide

BHM

Overview

Kit Contents

AV Input Harness

Power/CAN Harness

LVDS Video cable

GVIF-RR Interface

Remote

RGB Input cable

Input Toggle Switch

IR Eye Harness

01/07/13

3950 NW 120th Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

www.nav-tv.com [e-mail]

NTV-DOC158

GVIF-RR

NTV-KIT167

The GVIF-RR Kit allows the user to add up to 3 video inputs and a backup camera input to the
factory media screen in select Range Rover (LR3/HSE) vehicles. This kit has a dedicated rear
view camera input, 3 composite (RCA) audio/video inputs, an RGB input and an AV output with
AV switching.

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

1 | P a g e

BHM

Interface Connectors

Dip Switch Settings* Configure prior to installation

Dip SW:

1 2 3 4 5 6 7

8

UP

Enables

RGB

Enables

V1

Enables

V2

Enables

V3

Land Rover

Aftermarket

NAV

Factory or

no Rev-Cam

N/A

DOWN

Skips

RGB

Skips

V1

Skips

V2

Skips

V3

Lexus

Factory

NAV

Activates

aftermarket

Rev-Cam

N/A

AV IN/OUT

Power/CAN

Dip Switches

Status LEDs

*Note: If the dip switches are not configured prior to
installation you must remove power to the unit prior to
making adjustments to the dip switches. When power is
reconnected after the dip switch adjustment the new
settings will be stored into memory.

LCD IN/OUT

(LVDS Cable)

01/07/13

NTV-DOC158

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

2 | P a g e