Nav TV NTV-KIT899, COD-F50, COD-F5 Installation Manual

C.O.D.-F5

Ford OEM 360 Surround-View Camera Controller

NTV-KIT899

3950 NW 120

th

Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

BHM

11/12/18

NTV-DOC334

BHM

11/12/18

NTV-DOC334

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of
its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road
use and passenger entertainment only.

2 | P a g e

USB cable (updates)

NTV-CAB009

Overview

The COD-F5 (Camera-On-Demand) kit allows Ford SuperDuty trucks equipped with OEM (5-camera
system) surround view cameras to be displayed on demand, without lock-out restrictions. Additional
features include turn signal cameras, easy force rear cam & force front cam & last known camera
retention (from hard camera button press). NOTE: This kit will NOT program any camera system. This

module is only intended for use in SuperDutys equipped with the OEM trailer package (5-camera
system).

Kit Content

COD-F5 Module Pin Out

Pin #

Description

Color

1

12v Constant Power (+)

Yellow 2 INPUT 1: Force External Camera

Red 3 INPUT 2: NOT USED

Blue

4

INPUT 3: NOT USED

Pink

5

RX (OE camera button – button side)

Blue 6 CAN-3 HIGH (camera module)

Blue 7 CAN-2 HIGH (CAN gateway)

Blue 8 CAN-1 HIGH (APIM)

Yellow 9 CAN-0 HIGH (CAN gateway)

Yellow/Black

10

Ground (-)

Black

11

OUTPUT 1: NOT USED

White/Red

12

OUTPUT 2: NOT USED

White/Blue

13

OUTPUT 3: NOT USED

White/Purple

14

TX (OE camera button – module side)

Purple

15

CAN-3 LOW (camera module)

Purple

16

CAN-2 LOW (CAN gateway)

Purple

17

CAN-1 LOW (APIM)

Orange

18

CAN-0 LOW (CAN gateway)

Orange/White

Wire side

COD-F5 Module

NTV-ASY301

Plug & Play T-Harness

NTV-HAR329