NAV-TV BENTLEY-HUR User Manual

3950 NW 120th Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

NTV-DOC273

JH (rev 1.1)

USER GUIDE

BENTLEY-HUR

for Bentley (GT / SPUR / GTC)

NTV-KIT783

10

111 222 333 444

17

10

10

999

28

17

17

28

28 29

CONTROLS

All functions of the original unit have been retained in an easy to navigate menu
system.

11

12

18

19

11

11 12

12

29

18

18 19

29 30

30

19 20

30

20

31

20

31

31 32

21

32
21

21

32 33

22

33

22

22 23

33 34

23

34

23

34

24

35
24

24

35

35

13

14

666

555

25

13

13

14

14

36

25

25 26

36

36

26

37

26

37

37

15

777

15

15

16

888

27

16

16

38

27

27

38

38

39

39

39

40

40

40

All menus in the following sections can be entered by selecting the appropriate
function key. When a menu is selected the function key will illuminate yellow and
the relevant menu will be displayed in the centre LCD display.

To scroll through sub-menus press the relevant function key again (»). To adjust the
setting of the sub-menu use the up/down arrows and either the ENTER key to
accept and return directly out of the menu, or the function key to continue to further
settings within the menu. Once all sub-menus have been shown the function key
will return out of the menu and the display will return to the main AC display. Please
see the relevant section below for detailed menu / function descriptions.

All function keys will time out and return to the main AC menu.
Audio functions = 10 secs
Set-Up functions = 5 secs (wiper service will remain until the wipers are parked).

Control Keys: Arrow Up (5) / Arrow Down (13) - These keys are used to adjust
settings within the menus described in the following sections.
Enter (12) - This key is used to confirm and exit a setting menu.
Return (4) - This key will return to the main aircon screen and exit any sub-menu.

STEERING WHEEL CONTROLS

The way in which the steering wheel controls and some menus work will have
changed. It is not possible to display any information from the installed media unit in
the instrument cluster display.

VOLUME CONTROLS will adjust the volume of the installed media unit (subject to
compatibility please see “INSTALLATION MANUAL”.

PHONE CONTROLS will now enable you to answer and end calls received via the
installed media unit, (there is no control for VOICE activation).

Alpine head units - The PHONE button will accept and end calls.
Kenwood / JVC head units - The VOICE button will accept a new call and the

- The PHONE button will end a current call.

CLUSTER DISPLAY - Using the MENU keys on the steering wheel you can scroll
through the functions available on the cluster display.

When the AUDIO / NAVIGATION / TELEPHONE menu is active in the instrument
cluster display, the THUMB WHEEL will control features such as next and previous
track or radio station depending on the source selected on the media unit.

1.TRAVEL DATA - functions (this will work as before) showing SINCE START

/ SINCE REFUEL / LONG TERM information »

2. WARNING - Speed warnings can be used as before »

3. INFORMATION - you can select which current information to display

CONSUMPTION / SPEED / RANGE etc »

4. NAVIGATION - will now show MEDIA INTERFACE »

5. TELEPHONE - will now show MEDIA INTERFACE »

6. AUDIO - will now show MEDIA INTERFACE »

FUNCTION KEYS (» denotes press of function key)

Master Volume (1) - You can use the master volume to adjust the gain of the

factory amplifier to suitable levels dependant on the media unit you have chosen.
Enter the menu by selecting the function key, then use the arrow keys to select the
desired volume level.

BAL (10) & FADE (2) - These keys are used to set the audio balance & fader from
Left to Right and Front to Rear. Select the function key then use the arrow keys to
move the position. (Do Not use the balance & fader functions of the installed media
unit as this will not give a true representation of the audio fade function).