NAV-TV ALLGIG-XG HS, ALLGIG-XG FT Installation Guide

ALLGIG-XG

Video in Motion, CIM, Rev-Cam, Front-Cam, AV input, DVD video

output

For: Chrysler, Dodge, and Jeep with MYGIG radio

Instructions for NAV-TV interfaces

NTV-KIT260 ALLGIG-XG-HS

NTV-KIT272 ALLGIG-XG-FT

JR, BM, DS

03/01/16

NTV-DOC078

rB7

3950 NW 120

th

Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

ALLGIG-XG

Video in Motion, CIM, Rev-Cam, Front-Cam, AV input, DVD video output

For: Chrysler, Dodge, and Jeep with MYGIG radio

NTV-KIT260 ALLGIG-XG-HS

NTV-KIT272 ALLGIG-XG-FT

3950 NW 120

th

Ave, Coral Springs, FL 33065 TEL [phone] FAX [phone]

NTV-DOC078

Kit Contents

Overview

USB Cable

(updates)

NTV-CAB009

ALLGIG-XG Module

NTV-ASY166: HS

NTV-ASY171: FT

Plug and Play

Harness

NTV-HAR059

AVSW Switcher

NTV-KIT224

AllGig AV Harness

(required for cam input)

NTV-HAR120

AllGig Mic

NTV-ASY124

Optional Parts

 Enables Video in Motion (VIM) for both internal DVD and VES
 Allows Navigation Entry in Motion
 Enables the “View Video” button on radios that have this button locked out

With additional parts from NAV-TV, it will also:

 Enable Bluetooth and voice recognition on RER radios (ALLGIG MIC)
 Enable rear view camera input (AV harness & camera)
 Emulate VES to allow for additional external AV devices (AV harness & AVSW)
 Allow for the addition of an additional camera, such as a front view or FLIR (AV harness

& camera)

 Enable video out of the internal DVD to external monitors (AV harness)

Note: The “Video Out” on the AV harness will only display the image from the internal DVD
player. The camera or VES inputs will not display through the “Video Out”. The internal DVD

will pause when VES DVD is selected.

JR, BM

03/01/16

rB7

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

2 | P a g e

JR, BM

ALLGIG Operation

03/01/16

NTV-DOC078

rB7

Video in Motion/Navigation entry in motion:

Video from internal DVD or any external video source,
including factory VES, can be viewed while vehicle is in drive
and moving. All functions of the navigation will be unlocked
while in motion as well. There is no user interaction
required to enable this feature.

*RHB Radios only: Navigation-based speed indication will
no longer be available while VIM is active.

Force camera mode

Forced camera will work in multiple ways, depending on hardware installed and programming
of the module. To force the camera, press the radio power button 2 times in 1 second. (RBZ &
RHB radios require a second pause between presses)
Backup camera only- Whenever the vehicle is in reverse, the screen will switch to the backup
camera input. If forced camera is desired, as to see behind the vehicle when driving (viewing of
rear traffic or a trailer in tow), press the radio power button twice.
Backup camera with Front view (second) camera- When both front and rear cameras are
installed and programmed, the radio will cycle through the 2 cameras in the following
sequence: radio, rear view camera, radio, front view camera, radio…

 Start with radio on, regardless of source.
 Press radio power 2 times to force rear view camera.
 Press radio power 2 more times to return to radio.
 Press radio power 2 times again to force front camera.
 Press radio power 2 times once more to return to radio.

If forced front camera is active and the vehicle is placed into reverse, the rear camera will be
displayed, then the front camera image will return when shifted out of reverse. The screen will
stay in this state until the power button is pressed 2 times or the key has been cycled.

 *Note – The current audio source will not change when forced camera is activated.

External Audio/Video input

To view an external AV source, the optional AV harness is
required.

To access the external AV input:

 Press the Radio/Media button to the left of the

radio screen to access the Media page of the
radio, i.e., HDD, JB, DISC, etc. (As per picture on
right.)

 Touch VES; this will open a new window. Select

Aux 1 or Aux 2 to play the audio from the selected external AV source.

Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.

3 | P a g e