NR360 / NR460XX / NR560XX
User’s manual
NOTICE:
Because of still development, specifications and
functions are subject to change without notice.
We do not take responsibility for misprints.
Warnings and Notices
For your safety, do not operate the controls of the
product while driving.
GPS satellite signals cannot typically pass through solid
materials (except glass). GPS location information is not
typically available inside buildings, tunnels, or
underground parking lots.
A minimum of 4 GPS satellite signals is needed to
calculate your GPS position. Signal reception can be
affected by weather events or overhead obstacles (e.g.
dense foliage and tall buildings).
Other wireless devices in the vehicle may interfere with
the reception of satellite signals and cause the reception
to be unstable.
Charger
Do not attempt to service the unit. There are no
serviceable parts inside. Replace the unit if it is damaged
or exposed to excess moisture.
Do not use the adapter if the cord becomes damaged.
Connect the adapter to the proper power source. The
voltage requirements are found on the product case
and/or packaging.
Battery
This unit contains a non-replaceable internal Li-polymer
battery. The battery could be bursting or exploding and
releasing hazardous chemicals in case of over battery
specification and using in an abnormal conditions;
disassemble, crush, puncture, or dispose of the battery in
fire or water.
Abnormal operation could be dangerous to your human
body. Please be aware.
Use only the specified charger approved by the
manufacturer.
NOTICE: The Li-polymer battery in the device must be
recycled or disposed of properly.
Package contents
NavRoad device
Windshield mount
Car holder
Car charger
USB cable (Option)
Earphones (Option)
AC charger (Option)
Dashboard mount (Option)
TMC module (Option)
Manual
Micro SD card
depending on version
Quick guide
Hardware components
NR360 Top / left / right views
NR460XX Top / bottom / left / right views
NR560XX Top / bottom / left
NR360 / NR460XX
No
Function
1
Power
button
Standby mode by
pressing the button for
sleep/wake.
2
Power status
LED
Battery charging status.
Green—fully
charged or high
battery.
Orange—charging
Battery
Red—low Battery
3
microSD
Accepts Micro SD
storage cards, allows
you to use navigation,
audio and image files
stored in it for use with
internal applications.
4
Earphone
Standard stereo
headphone jack.
5
USB
port/Docking
connector
Connects the device to
computer running on the
Microsoft Windows
platform. Also serves as
the power connector for
charging the device.
6
Battery
Switch
To do a hard reset of the
device and suspend the
battery
7
Hand string
hole
To attach hand string *)
*) NR460XX device only
NR560XX
No
Function
1
Power button
-Click button to switch
suspend/wake-up mode
-Short press (2 seconds)
for turn on
-Long press (5 seconds)
for turn off when PND is
on battery power supply.
2
USB port/Docking
connector
Connects the device to
computer running on the
Microsoft Windows
platform. Also serves as
the power connector for
charging the device.
3
Earphone
Standard stereo
headphone jack.
4
Reset switch
To reset system when PND
is on external power
supply
To turn system off when
PND is on battery only
5
microSD
Accepts Micro SD storage
cards, allows you to use
navigation, audio and
image files stored in it for
use with internal
applications.
6
Microphone
For hands-free calls*)
*) NR560BF device only
Car holder
No
Function
1
USB
Port/Docking
connector
For USB port: Connects the device to
computer running on the Microsoft
Windows platform. Also serves as the
power connector for charging the
device. Connects to external TMC
module (Selected models only). For
Docking connector: connects to car
mount kit.
Using the mounting bracket.
Warning: Some countries prohibit the mounting of any
electronic device on the vehicle dashboard. Be sure to check
your local laws for acceptable mounting areas before
installing the car mount bracket.
Clean the mounting surface with a glass cleaner and a
clean cotton cloth.
If the ambient temperature is below +15°C (60°F), you
can warm the mounting area and the suction cup (e.g.
with a hair dryer) to ensure a strong suction bond.
Install the car mount on the selected area.
a. Press the suction cup of the car mount firmly against to
the windshield.
b. Press down the lever to fix the suction cup in place.
c. Adjust the angles of the arm to your proper viewing
position.
Mounting the device holder
a. Fit the device down in the device holder first, and then
lock it using the plugs on the bottom of the device holder.
b. Firmly dock the device with device holder on the car
mount which has been mounted to your windscreen.
Charging your device
a. Plug the car charger to the 12 V outlet of your car and
then connect the charger cable to the Mini USB port of the
device Please make sure the battery switch status in “ON”
mode (NR360 / NR460XX).
b. You now can let your device have the continuous power
by the car charger.
NOTE: Your car may be required to switch the vehicle ignition
into the accessories position to power the cigarette lighter.
Your device will not charge with the ignition off.
Starting your device
a. Push the battery switch ON (NR360 / NR460XX)
b. Press the power button to turn on your device, then the
main menu screen appears.
c. Tap Navigation, you will see the map screen displayed.
d. Please read the User’s Guide of Navigation software for the
detail setting information.
Please be noted, the first time turning on your device may
take some time to obtain a valid GPS fix.
Additional accessories
TMC Accessory (only available in certain areas).
You may use external TMC accessory to perform TMC function
when you are in a TMC Traffic signal available areas. Please
connect the TMC accessory to the USB port of the device for
the TMC application and be placing the TMC accessory in a
place which will not interfere to the driving safe.
Please be noted that NavRoad is not responsible for any
damage caused by an accident due to unreliable TMC radio
transmissions by national, regional, or local broadcasters
caused by TMC service restrictions, or by natural and
man-made conditions that prevent real-time information from
being delivered to the device.
Resetting the device
You should less than seldom need to reset your device under
normal circumstances. However, in the event that a problem
cannot be corrected, you may reset the device by the
following way：
NR360 / NR460XX RESET
Disconnect all cables, including the AC adapter, from your
device. Switch the device off and on, by sliding the ON/OFF
switch, then press the power button.
NR560XX RESET
Attach NR560XX to external power supply, then press Reset
switch (4).
Using the device
To turn on the device
Slide the battery switch to “ON”. (NR360 / NR460XX).
Turn on your device by pressing the power button on the
top right panel of the device.
Main menu
Settings:
Before first use it’s recommended to set the language and
timezone.
Tap “System” button
.
Tap “Language” button
It will display current language in central area
To drag, wheel scroll language tags.
To set the system time zone, tap “Time Zone” in System
Menu
Tap to set up the function of daylight savings
time.
Daylight savings time enabled.
Daylight savings time disabled.
Drag the Map to adjust the time zone.
Additional System settings
Reset
Tap “Reset”.
Tap “Reset GPS” icon
.
Tap “YES” button to reset GPS.
Tap “Factory Reset” icon in the Reset Menu.
Tap “YES” to do the Factory Reset
Tap “Calibration” icon in the Reset Menu.
Tap on the center of the target. Repeat as the target
moves around the screen.
System Information
Tap “About” icon in the System Menu.
You can view the OS version, GPS firmware version and
other system information.
Volume
Tap “Volume” icon in the System Menu
To adjust the volume, drag the wheel.
Backlight brightness
Tap the Brightness icon in the System Menu
Adjust the Backlight brightness by dragging triangle icon.
Setting the favorite application
category
Add icon to the favorite page
Drag the icon to the category bar of favorite
That will show the icon in favorite page.
Delete icon to the favorite page
Drag the icon from Favorite page to category bar and drop
it.
Confirm dialog will pop up, just tap “YES” to delete.
MP3 Player
Tap “Music” icon in the Main Menu.
NOTE: You can also enter the music player by right category
bar
MP3 player functions
No
Function
1 Return
Return to list page
2 Songs
List all song by alphabet
3 Album
List all albums by alphabet.
4 Artist
List all Artists by alphabet
5 Search
Current play list
1
2
3
4
5
Tap the song on the music list
Tap bottom information bar will switch to song’s progress.
No
Function
1 Play/Pause
Play/Pause song
2 Forward
Forward to next song.
3 Previous
Reword to previous
song
4 Stop
Stop music play.
5 Repeat
Repeat play songs.
6 Random
Random play songs.
7 Sound bar
To adjust the sound.
8
Bottom info.
bar
No even: This place will
scroll song’s name and
total play time.
Tap: Tap this bar. Will
switch to song’s
progress.
9 Return
Return to list page.
1
2
3
4
5 6
7
8
9
Photo Viewer
Support for JPEG files (Support Max. 500 photos).
Auto-scanning of supported files in the device’s Micro SD
card & Flash disk.
Three viewing modes: Thumbnail, Full Screen, and Slide
Show.
Album support based on sub-directory contents.
Each subdirectory can hold multiple images and be used
as an individual album. For a more organized file search, it
is advisable to sort image files into sub directories based
on meaningful name or date. An example could be
“summer vacation pictures” or “New baby” or “2005 Best.”
Slide-show
Images are adjusted to fit the entire display area and are
shown in a 5-second interval.
Using the Photo Album
Tap “Photo” icon in the Main Menu.
Will list all thumbnails in SD card and store in PND mass
storage & SD folder.
Drag all screen area will cause photo move to next or
previous page.
Tap specific thumbnail will enlarge thumbnail.
Tap the screen will display control bar.
No
Function
1 Return
Return to thumbnail page
2
Previous
page
Display previous photo.
3
Auto Play
mode
Auto play all photos.
4 Next page
Display next photo.
5 Rotate
Rotate photo 90O clockwise
1
5
2 3 4
File Explorer access
Tap “Amusement” button
Tap “Explorer” button
You have now opened the access to Operating System.
FM Transmitter (Option)
(NR560BF model only)
Has a great music-player-supported function to output
sounds via your car audio/stereo. FM frequency can be
varied from 88.2 to 107.8 Mhz.
Turn on FM Transmitter Frequency
a. Tap “Volume” icon in the System Menu.
b. Tap “FM” icon to open FM Transmitter function
NO
Icon
Function
Description
1
FM
Transmitter
Open FM
Transmitter
function
2
Stop
Stop FM
Transmitter
function
3
Frequency
Set
frequency
(Default
setting:
88.2 MHz)
4
Return
Return to
list page.
NOTE：There will be icon on the main menu to
remind you if FM Transmitter is operating.
Setting FM Transmitter Frequency
a. Set a frequency, 88.2 MHz for example, in your
car radio.
b. Tap frequency entry
c. Set the number as same as the frequency of
your car radio, and tap “Enter”
d. Set the same frequency number to make your
car radio receive audio from .
e. Go back to Main menu. Play “Music Player”,
“Video player” or “Navigation”.
f. Then sounds will come out from your car radio.
NO
Icon
Function
Description 1
Delete
Delete frequency number
2 Enter
Implement this frequency
number
3 Return
Return to list page.
NOTE: FM Frequency can only be set from 88.2
to 107.8 Mhz.
Bluetooth (Option)
(NR460BT, NR560BF models
only)
Once your Bluetooth-enabled mobile phone is paired with
the device, you can make hands-free phone calls through
your integrated microphone and speaker. makes it
easy to make and receive phones calls with ease while you
drive a car. Hands-free calling keeps things safe, letting
you keep your eyes on the road, while integrates
seamlessly with your mobile phone. Easy to connect and
use, just follow a few quick steps to enjoy the benefits of
Hands- free calling.
Connection
Tap “Bluetooth” icon of the right category bar to enter the
communication main menu.
NOTE：Make sure the Bluetooth setting of your mobile is
“ON” or “enable” mode, and the visibility is set to
“Discoverable” or “Show my phone”, (For more detailed
information, see your phone’s manual.)
Mobile Phone Connection
Tap “Settings” icon on the communication main menu.
Turn on Bluetooth function
Turn on “Automatic Answer” too if you also prefer to
automatically receive calls when the mobile phone is
ringing.
Choose automatic answering time: 3 seconds, 10seconds,
or 30 seconds.
NOTE：There will be icon on the main menu to
remind you if Bluetooth is operating.
Go back to the communication main menu screen and tap
“Connection”.
Tap “Search” to look for Bluetooth mobile phones.
Choose the mobile phone you want to connect with and
tap “Connection”.
Your mobile phone may require you to enter a password
to connect the device. Enter “0000” on the mobile phone
in this case.
When connection is accomplished, the name of the
connected phone is displayed on the title bar of the
“communications” screen.
Internet connection - to connect to internet, tap
“DialUp” icon.
NOTE：
If the connected mobile phone has the Bluetooth
auto-accept function, please turn on this function. (For
more detailed information, see your phone’s manual.)
Bluetooth function has distance limitation. When the
mobile phone is away, and makes Bluetooth function
disconnected, would try to re-connect within 10
seconds.
Calling Out
Tap “Call-out” icon.
Set the phone number you would like to call out and tap
“Dial” icon.
No.
Icon
Function
Description
1 Dial
Make a call.
2 Call History
Incoming/ receiving call
logs.
You can tap a phone
number directly to call
out.
3 Phone Book
Entering to phone book
page. (pl. refer to 5.5)
You can tap a phone
number directly to call
out.
If you would like to end a call, please tap “Hang up” icon.
No.
Icon
Function
Description
1
Hang up
End a call.
Receiving a Call
When the connected mobile phone receives a call, the
caller’s phone number and two buttons are displayed on
the screen.
To receive a call, tap ; to quit a call, tap .
If you have set “Automatic Answer” function, the incoming
call will be picked up automatically. And the screen will
switch to the communication main menu.
If you would like to end a call, please tap “Hang up” icon.
To enable or disable mute function, tap Microphone icon.
No.
Icon
Function
Description
1 Hang up
End a call.
2
Microphone
“ON”
Microphone function is
turned on. The other
side of the phone call
can hear your voice.
3
Microphone
“OFF”
Microphone function is
turned off and mute.
Your conversation won’t
be heard by the other
side of the phone call.
Phone Book (Import Phonebooks)
Tap “Contacts” icon.
Tap “Import” icon.
The contact information will be imported from the
connected mobile phone.
Troubleshooting and
Maintenance
Troubleshooting
If your device does not respond, do a “hard reset”.
NR360 / NR460XX reset
Disconnect all cables, including the AC adapter, from your
device. Switch the device off and on, by sliding the hard reset
ON/OFF switch, then press the power button.
NR560XX RESET
Attach NR560XX to external power supply, then press Reset
switch (4).
System reset
in the Main menu, tap System, then tap System Info. This
will allow you to do a factory reset (restore to default
settings), reset the GPS and recalibrate the touch screen
interface.
Screen responds slowly
Make sure you have enough battery power.
Inaccurate response to taps.
Recalibrate the touch screen.
Connection problems with PC.
Make sure that the cable is securely plugged into the USB
port on your computer and on the device. Connect the
USB cable directly to your computer—do not run the cable
through a USB hub.
Reset your device before connecting the cable. Always
disconnect your device before you restart your computer.
No GPS connection
Make sure that the GPS antenna has a clear view of the
sky. Note that the GPS reception can be affected by:
bad weather, dense overhead obstacles (e.g. trees and tall
buildings), other wireless devices in the car.
No sound coming from the device.
Make sure mute is not selected for Volume in system
settings. The built-in speaker turns off when the
headphone jack is being used.
I Can’t see my photos.
Make sure you are using supported image formats JPG.
Takes longer than normal time to get a GPS fix.
If the previous GPS fix position was more than 500 km or
12 hours apart from your current position and time, it will
also take significantly longer than the standard TTFF time
to get a GPS fix. This is due to the nature of the GPS
algorithm and rotational velocity between the satellites
and planet Earth, and deemed normal.
Perform a GPS reset in the main/system/system info menu
to get a faster GPS fix.
Factory reset does mean a GPS reset.
Yes. The Factory Reset function resets the OS settings to
their default factory values and it will reset the GPS
settings.
Maintenance
Avoid exposing your device to direct sunlight or strong
ultraviolet light for extended periods of time.
Do not drop your device or subject it to severe shock.
Do not subject your device to sudden and severe
temperature changes. This could cause moisture
condensation inside the unit, which could damage your
device. In the event of moisture condensation, allow the
device to dry out completely before use.
The screen surface can be easily scratched. Sharp objects
may scratch the screen. You may use non-adhesive
generic screen protectors designed specifically for use on
portable devices with LCD panels to help protect the
screen from minor scratches.
Never clean your device when it is powered on.
Never use organic solvents such as benzene or paint
thinner to clean your device. Use of these solvents can
cause deformation or discoloration.
Use a soft, clean, lint-free cloth to clean the display screen.
Moistened LCD screen wipes could also be used as
required.
Never attempt to disassemble, repair or make any
modifications to your device. Disassembly, modification or
any attempt at repair could cause damage to your device
and even bodily injury or property damage and will void
any warranty.
Storage
Do not store your device anywhere it may be exposed to
water or in conditions of high humidity.
When the device is not in use for an extended period of
time, bring it indoors and store it in cool dry area.
Accessories
Only authorized accessories should be use with the device.
The use of incompatible accessories could result in bodily
injury and/or damage to the device.
The use of unauthorized accessories will also void your
warranty.
Technical data
NR360
NR460XX
NR560XX
Operating System
Microsoft Windows CE 5.0
Processor
ARM9 360MHz
MTK 468Mhz
Screen
3.5” QVGA LCD
resolution 320 x 240
Touch screen
4.3” WQVGA LCD
resolution 480 x 272
Touch screen
5” WQVGA
resolution 480 x 272
Touch screen
GPS
MTK 66 channels
Memory
64 MB MDDR
1GB Flash (for user’s needs)
64 MB MDDR
2GB Flash (for user’s needs)
Battery
500 mAh Li-polymer
520 mAh Li-polymer
1250 mAh Li-polymer
Dimensions
95.6 x 74.7 x 11.95mm
117 x 77.4 x 11.55 mm
128.9 x 85.2 x 12.6 mm
Weight
106g
130g
185g
Audio
Built-in 1 W speaker
2.5 mm headphones jack
Built-in 1.5 W speaker
2.5 mm headphones jack
Connectors
Mini USB 2.0
SD card reader
micro-SD(up to 8GB SD)
Loading...