Navitel MSR205 User Manual [ru]
NAVITEL MSR205 | 1
2 | USER MANUAL
Device layout
(shown on the page 1)
1. Car windscreen holder
2. Speaker
3. Camera
4. Microphone
EN
5. Menu
6. Up
7. Down
8. OK
9. LED indicator
10. Display
11. Mini-USB por t
12. Reset
13. MicroSD slot
14. Pow er
Package contents
• Digital Video Recorder NAVITEL MSR205
• Car windscreen holder
• Car charger
• Cable mini-USB – USB
• Microber cloth
• User manual
• Warranty card
• Gift voucher
Full User Manual is available here: http://www.navitel.cz/docs/
Specifications
Processor MSTAR MSC8336
Display 2”, 480×240, TN
Camera GC2063 (night vision)
Recording format MOV
Video resolution 1920×1080, 30 fps
Image format JPG
Image resolution 1920×1080
View angle 120°
Lens 4-layer glass
Storage MicroSD card
MicroSD card capacity Max. 64 GB
USB mini-USB 2.0
Battery 180 mAh
Power 5 V, 1.5 А
Microphone / speaker Yes
Note: the specications may change due to upgrades.
NAVITEL MSR205 | 3
Installation
1. Put the microSD card into the DVR. Use a high-speed SD card (Class10 or above); capacity should be within 8-64 GB. Before using a microSD card, it is
necessary to format it inside the DVR.
• To avoid malfunctions of the DVR and / or SD-card, don’t insert and remove SD-card during DVR operation.
• Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD-card in Menu mode select Format
SD-card and conrm it.
2. Secure the device on the windshield with the bracket.
3. Connect the car charger to the cigarette lighter socket.
4. Connect the USB interface to the car charger with the charger extension cord.
5. Adjust the camera position.
6. Turn the power on; check whether the device is installed correctly. If the device is installed correctly, the indicator will glow red; the device will start up
and begin recording (indicated by ashing blue light).
Precautions
• Use only the original charger adapter. Using another adapter may negatively aect the device’s battery. Use accessories only approved by manufacturer.
• Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).
• Put the device away from re sources to avoid explosion or re.
• Do not expose the device to physical impacts.
• Avoid contacting the device with sources of electromagnetic radiation.
• Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn o the device before cleaning.
• Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
• Do not disassemble or repair device by yourself. In case of device failure, contact the service center.
EN
Loading...