Navilock NL-130BK User Manual

1

NL-130BK Bike GPS

User manual (61718)

2

Thank you for choosing a Navilock product. We are sure that the use of the NL-130BK will bring you
much pleasure. In order to avoid anything that could dampen your fun, please read this user manual
carefully before starting to use the device.

This manual provides illustrated step-by-step explanations of all the functions of this device and the
software. After reading this manual carefully, you can start using the device.

1. Introduction and Safety Information

1.1 Introduction

The NL-130BK is a GPS based bicycle computer with a DataLogger function that not only displays
current speed, but also records your leisure experiences so that they can later be transferred to Google
Maps. The M-STAR GPS-chipset allows the device to receive satisfactory signals even under adverse
conditions.

1.2 Safety Information
Important Health and Safety Information

When using this product, you should take the following safety precautions in order to avoid possible
damage and legal consequences. Please comply carefully with all safety and operation instructions
and keep it safely. Please pay attention to all warnings in this user manual and on the product. In
order to avoid injury, electric shock, fire or damage to this product, please comply with the following
warnings.

ELECTRICAL SAFETY

This product is designed to be powered by a rechargeable battery. Any other use can be dangerous
and will lead to the loss of any warranty claim for this product. Use only the original equipment and
never charge the rechargeable battery with any charger not approved by the manufacturer.

Handle storage batteries with care

If not handled properly, storage batteries can be a fire hazards and cause burns. Never
disassemble, destroy, perforate or short-circuit this battery. Never throw it into a fire or water, or
expose it to temperatures above 60°C (140°F).

NOTE: PLEASE RECYCLE OR DISPOSE OF USED BATTERIES OR STORAGE BATTERY CELLS
ACCORDING TO THE LOCAL REGULATIONS OR IN COMPLIANCE WITH THE INFORMATION
ENCLOSED WITH THIS PRODUCT.

SAFETY INFORMATION CONCERNING DIRECT SUNLIGHT

Avoid exposing the device to excessive dampness and extreme temperatures. Do not leave the device,
the battery, or storage battery cells, in a vehicle or any other place where the temperatures could rise
above 60°C (140°F) for any length of time. For exam ple, on top of a car dashboard, a windowsill or
behind a pane of glass exposed directly to the sun or very strong UV-light. This might damage the
device or the vehicle and overheat the batteries.

Damage requiring repairs

In the following cases, unplug the product, remove the rechargeable battery, and
contact an authorized repair specialist or your dealer:

• A liquid or an object has seeped in or penetrated the product.

• The product has been exposed to rain or damp.

• The product was dropped or damaged.

• There are visible signs of overheating.

• The product does not function correctly even when operated properly.

3

Please avoid using the device immediately after it has been subjected to large temperature
differences

If the device has been exposed to strong temperature and/or humidity fluctuations, condensation
may form inside the casing. In order to avoid damage to the device, wait until the moisture has
evaporated before turning it on.

NOTE: When the device has been taken from a cold place into a warm one, or vice versa, allow it to
reach ambient temperature before turning it on.

2. Specifications

Electronic and Mechanical details

Item NL-130BK

Max. waypoints 130848

Max. routes 99
Display size 29 x 28 mm

Display type LCD with 4 grey levels

Pixels (h x w) 128 x 128

Weight 60g

Protection class no

Dimensions 75 x 42 x 18 mm

Background illumination Ordinary
Operating temperature -10oC to +60 oC

Humidity 5% to 95% non-condensing

Power supply via Mini USB port

Charging connector DC 5 volt via Mini USB port

Battery 900mAh Li-ION battery

GPS (3D Fix), illumination on approx. 8 hours

Battery life

GPS (3D Fix), illumination off approx. 12 hours

PC connection mode USB interface

Charging time Mini USB 350mA, 3 hours to full charge

GPS parameters

GPS chip set MStar MB2122

Frequency L1, 1575.42 MHz

C/A code 1,023 MHz chip rate

Channels 48

Antenna type Built-in patch antenna

Position 5 meters

Speed 0.1 m/s

Time 1µs synchronized to GPS time
Date WGS-84

New detection 0.1 seconds, on average

Hot start 1.5 seconds, on average

Warm start 32 seconds, on average

Cold start 34 seconds, on average

Height 18,000 meters (60,000 feet) max.

Maximum speed 515 meters/second (1000 knots) max.

Acceleration less than 4g

Vibration 20 m/sec3

4

3. Contents

3.1 Accessories

Please confirm that all these parts are included in the package before you start using the device. Should
something be missing or damaged, please contact your specialized dealer immediately.

NL-130BK Handlebar holder

Fastening material

Mains Charger with USB connector

USB cable

CD-ROM

The actual charger delivered may differ from the illustration.

5

3.2 Device keys

Button Explanation

1. On/Off & Light  On/Off switch

2.

Marking Waypoint/

Enter

 Waypoint save / Enter key

3. Left  To move the menu to the left

4. Right  To move the menu to the right

3.3 Antenna position

The GPS antenna is located in the lower part of
the housing. This part should always have an
unobstructed view of the sky.

6

3.4 Battery instructions

The NL-130BK Bike GPS uses a built-in
rechargeable Li-ION battery. An indicator in the
lower left corner of the display shows the
remaining battery power.

 Charging of the storage battery:

1. Insert the Mini USB plug into the USB
port of the NL-130BK and the other
end in a USB port on a PC, vehicle or
mains charging adapter.

2.

It will take about 5 to 6 hours to fully
charge the battery.

Important: Charge the battery completely before starting the NL-130BK for the first
time.

4. Startup

4.1 Starting the NL-130BK

Press the ON/OFF button for 2 seconds. The startup
screen with the Navilock logo will then be displayed.

The NL-130BK will immediately attempt to get a
satellite fix. This may take a few minutes, or even up to
30 minutes, depending on the strength and reception
of the satellite signals.

The device will then switch automatically to the first
information screen. You can use auto or manual
screen switching.

4.2 Screen description

Current speed and current UTC time with the set time
zone.

All information screens contain the general “current
speed” information, or SPD (“speed”).

The current trip as a time designation. The clock starts
automatically with any movement.

SPD/trip

O0

.O

KM

time

7

Current speed and total distance covered (in
kilometers) since the initial startup, or the last reset of
the odometer. A reset is only possible from a PC using
the software provided with the NL-130BK.

The NaviSport Bike Tool can be used to set the
odometer display to another value, for example, if the
NL-130BK is to be used by different people.

Current speed and daily distance covered.

Current speed and average speed.

Current speed and maximum speed to date.

Current speed and current altitude (above sea level).