Navilock 28627-a, 28628-a User Manual

28627-a

7“ Monitor

e

26

User manual

Gebrauchsanweisung

7“ Monitor

User Manual (28627-a)

e

26

Important health- and security information

If you use this product you should take precautions to avoid damages and legal
consequences. Follow precisely all security- and handling advice and keep it
carefully. Pay attention to all warning notices in the manual and on the device. To

avoid injury, electric shock, re and damages on the device, please pay attention

to the following notices.

Electrical Security

This product is intended for operation with power of rechargeable battery or the
stated power supply. Any other application can be dangerous and lead to loss of
any warranty claim for this product. Please use only the original accessory and
never other accessory which is not approved from the producer.

Careful handling of the battery

There is danger of re and burning, when the battery wont be used properly.
Do not disassemble, destroy, perforate, short-out or throw it into water or re or

expose it to temperature higher than 60°C (140°F).

RECYCLE OR DISPOSE USED BATTERY ACCORDING TO THE
LOCAL INSTRUCTION OR THE ENCLOSED INSTRUCTIONS,
FOR THIS PRODUCT.

SECURITY ADVICE REGARDING DIRECT SUNLIGHT

Make sure the device is not exposed to over humidity and extreme temperature.
Don’t let the device for too long in a vehicle or other places where the temperature

-2-

-2-

can rise up to 60°C (140°F), e.g. on the dashboard, window sill or behind a glas
panel, which is exposed to high UV-Light or the sun. In this case the device or the
vehicle can be damaged and the battery superheated.

Damages, which require a repairing

Disconnect in the following cases the device from the grid and contact an
authorized repairing specialist or the dealer:

• Liquidity or any item came into the product or an object got into the device.

• The product was exposed to rain or liquidity.

• The product fell down and is damaged.

• There are visible signs of overheating.

• The product does not work properly despite of correct operation.

Avoid using the device after high variation in temperature

If you expose the device to high variation in temperature or humidity, there may
be condensation in the device. In order to avoid damages wait until the humidity
is evaporated, before using it.

Cleaning the device

Do not use any chemicals to clean the monitor. Just use a wet cloth and dry the
display with a clean cloth.

Objects around the device

Pay attention that no items like pen or MP3 player lay about near to the monitor.
They can cause serious damages on the monitor which are not part of the
guarantee.

If you bring the device from a cold into a warm or from a warm
into a cold environment, let the device take over the temperature
before switching it on.

Sentinels and their meaning in this manual

Security advice which need to be noticed unconditionally otherwise
wrong handling can cause heavy damages or legal terms will be
violated.

Important handling advice

-3-

1. Introduction

The 7“monitor is suitable for desktop monitor e.g. for network 19“cabinet or as
surveillance monitor for Firewall server as well as vehicle display in combination
with a Car PC. Its Touchscreen makes the use of a mouse or keyboard almost
unnecessary.

1.1 Package content*

1x Navilock 7“ Monitor
1x 110-240 Volt AC power supply
1x 12 Volt DC car charger
1x Adaptercable
1x IR remote control
1x battery for IR remote control
1x 8cm CD ROM
1x Universal Stand
1x User manual

*Make sure that the product package contains all items before operation. If any
item is missing or damaged, then please contact your dealer immediately.

2. Connectors / Operation elements

1. AV: AV input with SKS jack

2. TFT LCD Screen

3. PC/AV: computer/AV optional

4. <: Program selection key or using to select function in OSD

5. >: Program selection key or using to select function in OSD

6. MENU: Display MENU key

-4-

7. Infrared sensor

8. VOL-: Volume key or used to adjust the number of selected function in OSD

9. VOL+: Volume key or used to adjust the number of selected function in OSD

10. POWER: ON/OFF

: POWER ON/OFF
: MUTE
: Display inputted mode
: Display MENU key
: Volume down or to adjust the value of setting function
: Volume up or to adjust the value of setting function
: Selection key
: Selection key
: AV1,AV3, PC switch
: Number keys (NO USE)

: Unit, double-digit, three-gure.(NO USE)

: NO USE
: NO USE
: NO USE

3. Cable

1. Sub-D15 VGA male port

2. USB Touchscreen connector

3. Connector to the monitor

4. Yellow RCA jack: Video signal 1 input
White RCA Jack: Audio signal input
Red RCA Jack Video signal 2 input

-5-

After connecting the monitor properly, switch it on and press the menu-button
either on the display itself or on the remote control. For the menu you will only
need the following keys “^ ”, “ v”, “< ” and “>”. With these arrows you can change
the settings in the menu/OSD according to your options.

4. Display menu (OSD)
In AV mode: Display setting

Brightness

Contrast

Saturation

Tint adjustment

Sharpness

Language

Reset

OSD H- Position

OSD V- Position

OSD duration

Exit

After your setting please select to exit or the OSD will disappear in 5-8sends.

There are 6 languages approved of the menu, namely English, French, German,
Spanish, Italian and Chinese.

-6-

In PC Mode:

Picture adjustment

OSD COLOR TEMPERATURE

You can choose colour temperature such as: 6500 Ks, 7500 Ks or 9300 Ks.

Brightness

Contrast

Phase

Clock

OSD H- Position

OSD V- Position

Reset

Color temperature

Language

Miscellaneous

Exit

Otherwise you can adjust a colour
temperature that needs the options

“USER”. Then adjust “ ”, “

” and “ ” at will by pressing “–
“, “+”, “<” & “>” keys on either the

monitor or the remote control. As
the following picture shows.

-7-

Color adjustment
BLUE GREEN RED

miscellaneous

OSD miscellaneous is to enter into sub menu “ OSD H- position,
OSD V-position OSD duration auto colour, saturation and tint”

adjustment.

5. Technical Data

TFT LCD Screen 7 “/177 mm
Touchscreen 4 Wire USB
Highest Resolution 840 x 480 VGA (1.152.000 Pixel)
Max. interpolated resolution 1024 x 768
Display formate 15:9
Brightness 400 cd/m2
Contrast Ratio 200:1
Viewing Angle 130/105 (horizontal/vertical)
Colour System PAL-4.43 NTSC 3.58
Audio Output 100mW
Speaker Internal
Input Voltage DC 10.8-13.8V via car adapter or power supply
Power consumption < 10W
Signal Input PC, AV1, AV 2
Dimension 188 x 125 x 33 mm
Weight 0,44 KG

-8-