Navig8r NAVACTMON1 User Manual

1
Please read carefully before use and keep and store for future reference
NAVACTMON1
Activity Monitor
2
Read all instructions carefully before use
Retain this product manual for future reference.
Use this product only in the manner described.
Only use a water-dampened soft-cloth to clean the surface of the camera
including the lens. Remove particulate such as dirt or grease before you do so otherwise you may risk scratching the case.
Be aware of environmental conditions such extreme heat and cold, humidity, dusty, salty or sandy environments.
For first time use, it is recommended to charge for 1 hour to ensure a full battery charge. Subsequent charges can be as required.
There are no user serviceable parts in this product.
Un-authorized attempts to dismantle or repair this product will void your
product warranty
Index
Package includes
3
The Wrist Band 3 Supported Devices 3 Charging 3 Smart Phones and Android Installation 4 Operating your wristband 5 Operating the App 6 Home Screen 6 Trend Screen 6 My Friends Screen 7 The More Screen 7 My Wristband 8 Personal Data 8 FAQ _________ 9 Specification 9
3
Package Includes
Activity Monitor, 3 Coloured Wrist bands, Wrist Band Clasp, User Manual
The Wrist Band
To fit the wrist band, pull up to unlock the clasp and adjust the wrist band to fit your wrist. To re move, simply follow these instructions in the reverse order
Remove the fitness monitor USB drive also by pulling back on its clasp and carefully removing it from its holder.
Supported Devices
A bluetooth version 4.0 product is required to operate this device such as:
Apple: iPhone 4S, 5, iPod Touch5 (iOS must be 6.0 or above) Android: Version 4.3 or above with Bluetooth 4.0 hardware support
Charging
Typical charging times are up to 1 hour via the USB port of a PC, power bank
or other USB charging device (over 300mAh)
To Re mo ve :
Pull up to
Un-latch
Then slide
the USB plug
out.
To I n
sert:
Slide the USB
back in and
push down to
latch
4
Smart Phones and Android Installation
1) Go to the product page on the LASER web site and download the App installation file for your device http://www.laserco.net/products/v-fitness
2) OR, Go to the App Store or Play Store and download and install the Navig8r “Navig8r Move” App install file.
After installation open “Navig8r Move” ensuring that you have access to the internet (via Wifi or 3 / 4G) for cloud storage access.
Create a new account using your “Nick Name”, email address and password, or login if you have an existing account. Note: By creating a user account you can save and backup your information to the cloud.
If you have forgotten your password, simply click “Forgot Password” to have a password reminder emailed to you.
After logging in, you need to connect to your wristband To first connect to your wristband you will need to produce a pairing code for your device. Do this by:
1) PRESSING AND HOLDING the wristband button (Note: making sure the screen has turned on), then
2) PRESS the “Search Wristband” button on the application
3) A unique 4 digit pairing code will then be displayed
4) Enter this code back into the App, to complete the process.
Note: Repeat the search function if the 4 digit code was not displayed.
OR
Forgot password
Visit the LASERCO web site to
purchase a wrist band
5
Operating your wristband
This wrist band does not have an On/Off button. It simply enters hibernate mode if the wrist band button has not been pressed after 6 seconds.
The wrist band has two different modes, indicated by the flashing icons at the bottom of the wrist band screen. Toggle between each screen by pressing and holding the wrist band button.
Non flashing icons (main screen) This is a perpetual counter that shows total combined data and steps
When toggling between screens this mode ALWAYS shows: Current time and battery life, total steps, total distance and total calories burnt.
Flashing Icons (Lap timer screen) This screen can display individual lap times for example, by resetting a separate counter back to zero (without changing the master screen data.)
When toggling between screens this mode shows: duration of activity, steps, distance and calories.
Note: By changing modes you will also zero off the previously saved lap data of the lap timer screen.
6
Operating the App
Home Screen
Trend Screen
Review, compare and track your progress (and sleep cycles) by Day, Week, or Month. (Note: Use your finger to swipe through the records)
Share to
Facebook
By Day
By Month
By Week
View the previous
day’
s data
More (Settings)
Trend
screen
“My”
Home
screen
View the follow day’s data (if
any)
Friends
screen
7
My Friends Screen
Add and share you results with your friends and compare your progress.
The More Screen
The MORE screen has 5 options to choose from:
1) My wristband
2) Personal data
3) Change Password
4) Help
5) Log out
To a dd a friend, simply press the “+” sign and enter your friends email address, then press OK.
8
My Wristband
Use the My Wristband screen to set alarms and wake up times
Note: During sleep mode, the activity monitor will be deactivated so to avoid any false monitoring (and button pressing) while sleeping. To turn off or to change the sleep mode time, use the Navig8r Move App to change these settings.
Personal Data
Change or update data such as your Step Goal Targets and body m etrics
9
FAQ
My App keeps freezing
Most common causes of the App freezing is a
bad internet connection. Please check your
internet connection thoroughly.
I attempted to pair
device but it is frozen.
I searched for device via the app, and then it asked me to enter the unique code to the device. I then pressed “back” in the app. Now the device is stuck with the code displayed on the device and still waiting to be paired. What do I do?
Please reset your activity monitor
How do I reset my activity monitor?
You can res
et the device by holding down the
button on the wrist band for around 10
seconds.
All I can see on my
monitor is the time and the button no
longer works.
Check that the monitor is not on sleep mode,
via the App. During sleep mode the button is disabled to avoid unintentional button
pressing etc.
Specifications
Supported Apple devices
iPhone 4S, 5, iPod touch5, etc.(OS must
be IOS6.0 or later)
Supported Android devices
Android 4.
3 or later (Samsung S4, Note 3
etc)
Supported Bluetooth
Versions
Bluetooth 4.0
10
Warranty against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. Through a network of retailers and resellers, Laser will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear, neglect or improper storage. Please retain your receipt as proof of purchase. How to make a product warranty claim: Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified, your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of the Laser product and the type of defect. Step 2a): Contact your place of purchase. They will assess the nature of the fault and refund or replace the product as per their store refund or warranty policy. Step 2b): If your place of purchase cannot be contacted, then you can contact Laser Customer Service with details of your defective Laser Product Phone (02) 9870 3355; or Email: service@laserco.com.au or online www.laserco.net/support/warranty (click on “Consumers (End Users)”). Our business address is at 1/6-8 Byfield Street, North Ryde, NSW 2113. Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us the defective product and a copy of your receipt. Laser will cover the cost of the return delivery. Step 4: Wait for us to contact you. Once we have received your defective Laser product for inspection, we will inform you of our assessment of your claim within 7 days. When we contact you, we will firstly let you know whether you have a valid claim under this Warranty, and if so, we will inform you whether your defective Laser product will be replaced or repaired, together with the number of days you can expect to wait to receive your replaced or repaired Laser product.Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
9.
Loading...