www.navig8r.com.au
1
TABLE OF CONTENTS
Contents
Important Notices and Warnings ............................................................................. 5
Global Positioning System ..................................................................................................... 5
Precautions ............................................................................................................................ 5
What’s in the box .................................................................................................... 6
Getting to Know Your Navig8r GPS .......................................................................... 6
Warning .................................................................................................................. 7
Before Using Your Navig8r GPS Unit ........................................................................ 7
Mounting the GPS Unit in Your Vehicle ................................................................... 8
Connecting the Car Charger ..................................................................................... 8
Navigation
Before Using the Navig8r Please Read the Following ............................................. 11
Key Features ........................................................................................................................ 11
Getting started with your Navig8r GPS System ...................................................... 12
MAIN MAP SCREEN ............................................................................................... 13
Getting to Know the Main Map Screen ............................................................................... 13
1: Next Turn by Name / Turn By Turn Menu ....................................................................... 15
2: Low GPS Satellite Signal Warning Message ..................................................................... 15
3: Quick Options Menu ........................................................................................................ 15
A: Toll Road: ..................................................................................................................... 16
B: Quickest Route:............................................................................................................ 16
C: Shortest Route: ............................................................................................................ 16
E: Detour .......................................................................................................................... 16
F: Route Pause ................................................................................................................. 16
4: GPS Signal Indicator ......................................................................................................... 16
5: Battery Level Indicator .................................................................................................... 18
6: Next Turn Indicator / Advance Turn Assist (ATA) & Repeat Last Spoken Direction Button
............................................................................................................................................. 18
7: (& 17) Zoom In and Out of Maps ..................................................................................... 19
8: Speed and Red Light Camera Alert .................................................................................. 19
www.navig8r.com.au
2
TABLE OF CONTENTS
9: Compass ........................................................................................................................... 20
10: Main Menu Button ........................................................................................................ 20
11: Route Overlay ................................................................................................................ 20
12: Current Speed Indicator/Speedo/Trip Statistics Button ............................................... 20
13: Current Position Indicator ............................................................................................. 22
14: Current Road / ETA Indicator ........................................................................................ 22
15: Current Speed Limit/ Over Speed warning Icon ............................................................ 23
16: Speed / Red Light Camera Location.............................................................................. 23
17: (& 7) Zoom In and Out of Maps ..................................................................................... 23
18: Scrolling Maps ............................................................................................................... 24
19: Waypoint Navigation ..................................................................................................... 24
20: Lane Assist ..................................................................................................................... 25
Main Menu
The Main Menu .................................................................................................... 26
Modern Menu .................................................................................................................. 26
Classic Menu .................................................................................................................... 26
1. Driver Profiles .................................................................................................................. 27
2. The Navigation menu ...................................................................................................... 29
Classic Menu .................................................................................................................... 29
Modern Menu .................................................................................................................. 29
Entering your Destination by an Address ........................................................................ 29
Entering your Destination by the 3 Step Wizard ............................................................. 30
Entering Your Destination Using Quick Step Method ......................................................... 32
Change the trip options. ...................................................................................................... 34
A: Quickest Route: ........................................................................................................... 34
B: Shortest Route: ............................................................................................................ 34
C: Walking mode: ............................................................................................................. 34
D: Toll Road: ..................................................................................................................... 34
E: Camera Alert: ............................................................................................................... 34
F: SpeedAlert™: ................................................................................................................ 34
Via (Waypoints) ................................................................................................................... 34
www.navig8r.com.au
3
TABLE OF CONTENTS
Fine Tuning the Destination ................................................................................................ 35
Search for Places (Points of Inerest or POI) ..................................................................... 37
Searching By Nearest ....................................................................................................... 38
Searching By Name .......................................................................................................... 39
Nearest on route .............................................................................................................. 40
Recent Places ................................................................................................................... 41
Favourites......................................................................................................................... 42
Options Menu ....................................................................................................... 44
Look & Feel ...................................................................................................................... 44
Trip options. ..................................................................................................................... 46
SpeedAlert™ Settings ...................................................................................................... 47
Sound ............................................................................................................................... 48
Help .................................................................................................................................. 49
About................................................................................................................................ 50
Record .................................................................................................................. 51
Free Driving .......................................................................................................................... 52
Business Driving ................................................................................................................... 52
Supervised Driving ............................................................................................................... 53
Generating Reports ............................................................................................... 53
Installation ........................................................................................................................... 54
Generating Reports ............................................................................................................. 56
ACCESSING THE RECORDED FILES ....................................................................................... 58
Displaying your recorded trip on Google Earth* .................................................... 59
Updating the Software for the Navig8r .................................................................. 62
Adding Your Own Points of Interest (POI) Data to the Navig8r .............................. 63
Hardware
Main System Menu ............................................................................................... 65
A: Main Title Bar .................................................................................................................. 66
C: Time and Date ................................................................................................................. 66
D: Battery Indicator ............................................................................................................. 66
E: E-Book .............................................................................................................................. 67
www.navig8r.com.au
4
TABLE OF CONTENTS
G: Music ............................................................................................................................... 67
H: Video ............................................................................................................................... 68
System Settings ..................................................................................................... 69
A: Volume ............................................................................................................................ 70
B: Langauge.......................................................................................................................... 70
C: Backlight .......................................................................................................................... 70
D: Battery ............................................................................................................................. 71
E: Time & Date ..................................................................................................................... 71
F: System Information ......................................................................................................... 72
Specifications ........................................................................................................ 73
Disclaimer ............................................................................................................................ 73
Frequently Asked Questions.................................................................................. 74
www.navig8r.com.au
5
IMPORTANT NOTICES AND WARNINGS
Important Notices and Warnings
Global Positioning System
The Global Position System (GPS) is a satellite-based system that provides location and timing
information around the globe.
GPS is operated and controlled under the sole responsibility of the Government of the United States
of America, who are responsible for its availability and accuracy. Any changes in GPS availability and
accuracy or in environmental conditions, may affect the operation of your Navig8r. We cannot
accept any liability for the availability or accuracy of GPS.
Precautions
For your safety and the safety of other road users, do not operate the controls of this Navig8r while
driving. Use care when operating the Navig8r. This product is intended to be used only as an aid to
navigate. It is not intended for the precise measurement of direction, distance, or location
topography.
The Calculated routes are for reference only. It is the user’s responsibility to follow all local traffic
regulations and traffic signs when driving. Local conditions and regulations may change at short
notice and may not be included in the software/mapping data of this product.
When leaving your vehicle, do not leave the Navig8r on the dashboard of the car. It should be
removed and placed in a secure place along with the windscreen mount and power cable. Do not
leave the Navig8r in direct sunlight when not driving the vehicle. Overheating of the battery may
cause damage or cause the Navig8r to malfunction. Extreme overheating may cause the battery to
leak.
GPS satellite signals cannot pass through solid materials with the exception of glass. When
travelling through tunnels or inside buildings, such as parking stations, GPS positioning is not
available. The time taken for the Navig8r to re-acquire satellite signals when emerging from tunnels
or buildings may vary and will depend on atmospheric conditions and the environment.
A minimum of four GPS satellite signals is required to determine the Navig8rs current location.
Signal reception can be affected by atmospheric conditions such as; bad weather, thick clouds, solar
activity and dense overhead objects such as trees, tall buildings and large road signs. Wireless
devices can also interfere with satellite reception.
The use of devices with a GPS antenna is prohibited on most aircraft, hospitals and other locations
that contain sensitive equipment. The Navig8r should not be used in these environments.
www.navig8r.com.au
6
WHAT’S IN THE BOX
What’s in the box
Unpack the box and identify the contents. You should have the following items:
Item Description Item Description
1 The Navig8r GPS unit 2 GPS device holder including stylus
3 Bracket/
Windscreen Mount
4
Car Charger (
12v DC)
5 USB Data Cable
6 2GB Micro SD card (Pre fitted to GPS)
Getting to Know Your Navig8r GPS
Item
Description
Item
Description
1 Power Button
2
Micro SDHC Card Slot
3 Reset button
4
USB Connection Socket
5 Speaker
Face LCD Touch screen
*Images shown on this page may vary slightly from actual product.
www.navig8r.com.au
7
WARNING
Warning
This Navig8r GPS should not be used in conditions of high temperature, high humidity or dusty
conditions. We recommend that the Navig8r is not left in direct sunlight for extended periods or left
fitted to the windscreen, dashboard or glove box.
Prolonged exposure to high temperatures may cause the Navig8r to malfunction and may even
cause permanent damage to the Navig8r.
There are no user serviceable parts in this device. Opening the device may cause harm and damage
the device. Any attempt to disassemble this device will void the warranty.
Images, screen shots and features shown in this manual may vary slightly from the actual product.
We reserve the right to make changes to this product without notice.
Before Using Your Navig8r GPS Unit
Please check the contents of the packaging and ensure that all equipment is located and identified.
The protective screen cover may be left on the device but may impede the viewing of the device in
normal operation.
Connect the Navig8r GPS unit to power source for a period of 24 hours in the first instance to charge
and condition the battery. It may take several charge/discharge cycles for the device to reach peak
endurance. The charging process will take longer if the device is turned on.
Subsequent charging should take less time to complete.
This GPS can only be charged from the PC USB port when the Navig8r is turned OFF.
Once the initial charge has been completed turn the GPS device on. The Navig8r should launch the
Navigation software.
To turn the device off for short periods simply remove the Navig8r from its power supply (or turn
the ignition off). If the navigation software is running the Navig8r will detect the power off and place
itself in sleep mode. When the power is turned back on again the Navig8r will start at the last screen
shown.
The GPS will continue to draw power from the battery in sleep mode and will go flat after 24 to 36
hours.
To turn the GPS off manually or if the device is not to be used for periods longer than two or three
days, simply press the power button for 3 seconds and then tap the shut down option or cancel to
return to the previous screen.
www.navig8r.com.au
8
CONNECTING THE CAR CHARGER
If no option is selected the Navig8r will turn off after 15 seconds.
Prior to using the GPS system for the first time, it is recommended that the touch screen be
calibrated. Please see the system setting instructions further on in this manual.
Mounting the GPS Unit in Your Vehicle
Fit the windscreen mount to the holder which you have attached to the rear of the GPS unit and test
mount the GPS on the windscreen of the car. Choose a position that will not obstruct your vision
whilst driving but will also provide the GPS unit the best coverage of the sky through the
windscreen. Loosen the two knobs on the mount to allow movement of the pivot points.
The Navig8r should only be fitted on fixed windows.
Once the best location has been determined, remove the protective film from the suction cap of the
windscreen mount and, on clean glass, fit firmly against the windscreen. Push the tab located on the
top of the suction cup towards the windscreen until it locks in place. For best results it is
recommended that the suction cup be moistened before fitting.
In a normal driving position adjust the GPS to a position that will be in view whilst driving and does
not obstruct your view of the road. Once the correct position has been found tighten the two knobs
on the mount to prevent the GPS moving from vibration. Do not over tighten these knobs.
Changes in temperatures and condensation may cause the suction cup to become loose and should
be checked on a regular basis. To avoid damage or theft, the GPS should not be left on the
windscreen mount overnight.
To remove the mount from the windscreen, take hold of the mount in one hand and use the other
to pull the tab away from the mount. Locate the plastic tab on the side of the suction cup and gently
pull away from the windscreen to break the seal.
N.B: Tinted windows may impede the Navig8rs ability to detect the GPS satellites correctly.
Connecting the Car Charger
Caution: To protect the GPS against the possibility of damage caused by power surges when the
vehicle is started, the charger should not be connected to the GPS device when the vehicle is
started.
The car charger supplies power to the device when it is being used in the vehicle.
Connect the USB plug to the USB socket of the GPS and then fit the other end in to the
cigarette/power outlet of your vehicle once the vehicle has been started.
www.navig8r.com.au
9
CONNECTING THE CAR CHARGER
The charge light indicator on the GPS should glow when connected to power.
The GPS can now be started by pressing the power button on top of the device for about 3 seconds
.
When starting the GPS in the vehicle it may take a short period of time for the system to acquire a
valid GPS signal. Please make sure that the GPS unit has a clear view of the sky and is not impeded
by trees, awnings, car ports or similar obstructions.
www.navig8r.com.au
10
NAVIGATION
NAVIGATION
www.navig8r.com.au
11
BEFORE USING THE NAVIG8R PLEASE READ THE FOLLOWING
Before Using the Navig8r Please Read the Following
Personal Navigation devices are designed to be an aid to navigation only. They are to be used in
conjunction with all local road rules, laws and regulations. It is the responsibility of the driver to
ensure that the vehicle is driven in a safe manner in compliance with these laws.
In most states it is illegal to operate a GPS system while driving a vehicle. When entering
information into the GPS, please pull over safely to the side of the road before using this device. It is
better to set the destination for the GPS before you start on your trip rather than trying to enter it
on the move.
When positioning the GPS system on the windscreen of your vehicle, make sure that it is placed in a
position that provides a clear view of the road ahead and ensure the driver does not have to look
away from the road to check the screen.
Please read the hardware section to ensure that all accessories can be identified and you can
assemble the navig8r GPS. Also please read the section on “Mounting the GPS unit in your vehicle”
in the hardware section to ensure that the Navig8r is mounted safely and securely.
The first time the GPS unit is used, or it has not been used for some time, it may take some several
minutes for it to detect the GPS satellites. Restarting the system in the same location should acquire
the signals quickly.
Please read this section carefully before using the Navig8r.
Key Features
Highly accurate maps.
Individual driver profiles.
Speed Alert Trail.
Choice of familiar Maps skins.
Intuitive menus.
Locally customised Text to Speech voice engine.
Simple to use.
30 Day Map Guarantee*
*Conditions may apply. Device must be registered online within 30 days of purchase to qualify. Internet
connection required. Offer only available online. Please refer to the Navig8r website for full details.
www.navig8r.com.au
GETTING STARTED WITH YOUR NAVIG8R GPS SYSTEM
Getting started with you
Mount and connect the
Navig8r as described
the Navig8r. The Navigation software will run automatically.
After the Welcome and h
elp screen is displayed,
When the
Navig8r
is first started you will
be presented with the options shown to
the right.
Click on the View M
ap Icon to start
navigating straight away using the default
driver options or tap the Driver option to
enter your name and license type in to
the Navig
8r. This feature is very useful if
the Navaig8r is to be used by different
drivers that hold different licence types.
The Driver profile allows each driver to set their own preferences for the look & feel as well as safety
warnings. Drivers can also
record their driving route time and supervising driver if required.
The recorded data can be used, with the aid of the Desktop Reporter software to print out reports
for log books,
business use or for personal use.
The recorded files can also be used in
Please see the Driver profile section later in this manual for detailed instructions.
Tap the
icon to remove this screen being shown at start up.
Please see the Driver profile section later in this manual for det
r Navig8r GPS System
in this manual. Press the
power button
the start up screen will be shown.
Google Earth™ to display the route.
ailed instructions.
12
on the top of
www.navig8r.com.au
MAIN MAP SCREEN
Getting to Know the Main Map Screen
MAIN MAP SCREEN
13
www.navig8r.com.au
14
MAIN MAP SCREEN
Description
Cruise
Route
Action
1
Next Turn by Name / Turn By
Turn Menu
Displays information on the next turn
Tap to display route turn by turn list
2 GPS Signal Warning Message
Shown when GPS signal low or not found
3 Quick Route Options
Displays the quick route options screen.
4 GPS Signal Indicator
Amber = signal too low to be accurate
Green = signal good
Tap to display Signal information page
5 Battery Level Indicator
Tap to display detailed battery information
6
Next Turn /Advance Turn Assist
Repeat Last Spoken Instruction
Displays the next turn action required on
route.
Tap to repeat last spoken instruction on route.
7 &
17
Zoom in / Out on map
Zooms in or out on maps (Speed dependant)
8 Speed / Red Light Camera Alert
Displayed when within 250 meter of known
camera location camera
9 Compass
Shows current heading in relation to North
10 Exit to Main Menu Button
Exits Map screen to the main menu
11
Current Speed Indicator /
Speedo / Trip Statistics Button.
Displays current vehicle speed as calculated
from GPS signal.
Tap to display Speedo page and Trip statistics.
12 Current Position Indicator
Displays current location on map
13 Route Overlay
Overlay displayed on the roads to be taken for
the Calculated route.
14
Current Road Name / ETA
Indicator
Displays name of current name of road.
Tap to display distance remaining and ETA in
route mode.
15
Current speed limit/Over speed
warning icon
Displays the
road
speed
limit
and warns of
driver speeding
17
Speed / Red Light Camera
Location
Displays the location of the safety camera
18 Scrolling Maps
Push the
map around to show the surrounding
area
19
Waypoint Navigation
Tap to access waypoint listing (If in use)
20
Lane Assist
www.navig8r.com.au
1:
Next Turn by Name / Turn By Turn Menu
This screen will be blank when in cruise mode. This screen sh
turn into and the current distance from the turn.
Tap on this to display the Turn By turn List for the calculated route
Top bar show the destination address. Use the
up and down arrows on the side to scroll
th
rough the list to display all the turns in the
route. Distance shown is the distance between
each turn you must make to follow the route
Tap the Back and Map buttons to return to the
Main Map screen or the End Trip to stop the
calculated route and return
to Cruise mode
2:
Low GPS Satellite Signal Warning Message
A low satellite warning message will be displayed when less than 5 satellites are being detected.
See Number 4 (GPS Signal Indicator) for more details.
3:
Quick Options Menu
Only displa
yed when in a route, this menu
gives several quick options for changing
the criteria for the current route.
If the option is active, the icon will be
shown with a .
Tap on the icon to activate or deactivate
the option as required
M
AIN MAP SCREEN
ows the next street or road you need to
.
15
www.navig8r.com.au
A: Toll Road:
When selected (as shown) will allow the system to calculate the route along
tolls roads between the current and selected destination.
B: Quickest Route:
Calculates the route for the quickest journey. This option may be
longer but should ta
ke less time.
C: Shortest Route:
Calculates the route for the shortest distance between current location
and destination. Even though the distance may be shorter, the journey may take longer
depending on the assigned speed limits for the roads travelled.
D: Full Recalc:
Forces the
to the
destination address. This feature is useful if you decid
c
alculated route. The inbuilt “return to route” feature
calculated route if you miss a turn. The “Full Recalc” option allows for the full recalculation
to ensure that the best route from your current location is used.
E: Detour
:
Use this option to find a way around an acc
work out an alternative route from the calculated route for 500 meters, 1
Kilometres or 5
Kilometres
recommend that the 5
Kilometre
should recalculate the best route from you new location.
NOTE:
*Detour will only function if an alternative route is available and viable.
F: Route Pause
:
The “Route Pause” option allows you to pause the
to make a minor detour off the road but have not missed a turn. If during your trip you wish
to stop at a shopping centre for lunch, this feature allows you to pause the trip to prevent
the GPS unit for trying to recalculate the rout
A warning message will be displayed on the main map screen if the trip has been paused. Tap on the
icon in the Quick Trip options to resume the trip or on the warning message.
4:
GPS Signal Indicator
The GPS signal status icon is d
isplayed in all modes The
satellites to determine your current location accurately and to be able to calculate routes.
If shown in RED, no Satellites are being detected and the location shown on screen
may
not be the actual location of the GPS unit
that it detected valid satellite signals. No trips can be calculated until 5 or more
satellites are detected
MAIN MAP SCREEN
Navig8r
to recalculate the full route from your current location
e to make a side trip from your
will always try to return you to the
ident or road works. Detour will
and then return to the original route. For longer detours it is
option is used
and then use the “Full Recalc” option as this
GPS unit if you decide
e back to the road.
Navig8r
requires valid signals from at least 5
,
but the last location for the
.
16
Kilometre, 3
Navig8r
www.navig8r.com.au
Tap on the GPS icon
in the main map screen
information will be displayed
.
Ta
p the up and down button on the side
to display more information.
Latitude and Longitude:
Displays the
current Latitude and Longitude of the
Navig8r.
Displayed in both Decimal Degrees as well
as Degrees, Minutes and Seconds.
Satellites: Shows the numb
er of satellites the Navig8r is receiving a valid signal from. The
number, the greater the accuracy of the Navig8r. Up to 12 satellites can be detected at any one
time.
Speed:
Shows the current speed in Kilometres per hour
Heading:
Shows the bearing in
motion for this reading to be correct.
Altitude:
Shows the current altitude in meters above sea level of the Navig8r GPS system as
calculated from the satellite signals.
Precision:
The lower the number, the more accurate the data from the GPS satellites is.
Tap on the Back or Map buttons to return to the main map screen
If shown in AMBER, less than 5 valid satel
satellite signals do not provide enough accurate data for the GPS unit. If the signal
drops during a calculated route, the map will be paused until the signal is detected
again.
If shown in GREEN, 5 or mor
accurately determine the current location. Routes can now be calculated.
MAIN MAP SCREEN
to show the GPS information screen. The following
degrees for the current direction of travel. The system must be in
lite signals are being received. Less than 5
e satellites are being detected and the
Navig8r
17
higher the
Navig8r
can
www.navig8r.com.au
5:
Battery Level Indicator
This icon shows the current level of charge remaining in t
connected to an external power source like the USB port of the computer or the car adaptor
Tap on the Battery Level Indicator icon to
show the battery level displayed in percentage when not connected to external power source.
Tap on the Back or Map button to return to the Main Map screen.
6:
Next Turn Indicator /
Spoken Direction Button
During Navigation mode an icon is shown on the screen to indicate the type of action to be taken at
the next intersection. There are 2 types of icons you can have displayed.
Please refer to the “Look & Feel”
Indicator
The Indicator view displays an icon that is indicative of the next turn
only. This icon may not truly represent the upcoming turn and is meant
as a visual guide only.
ATA
Advance Turn Assist,
approaching int
intersections.
Green with +
Indicates that the GPS unit is connected to an external power source
and is charging.
Red
Indicates that the battery
power source as soon as possible
Amber
Indicates that the battery is approximately half charged.
Green
Indicates that the battery is fully or near fully charged.
MAIN MAP SCREEN
he battery or if the unit is
show the battery information screen. This screen will
Advance Turn Assist (ATA)
& Repeat Last
for information about selecting these options.
i
f selected can display a representation of the
ersection. This is very useful
if approaching complex
level is low and should be connected to a
18
.
www.navig8r.com.au
19
MAIN MAP SCREEN
Both options are a representative only. Due to circumstances beyond our control, intersections may
vary or change and these changes may not have been included in your current map version.
Tap either icon to repeat the last spoken instructions by the Navig8r. Distances given in spoken
instructions are updated to reflect the current distance from the turn.
7: (& 17) Zoom In and Out of Maps
When stationary, you can zoom in and out of the map screen to display a greater or less area than is
currently being displayed. This is useful when stopped to get a more detailed look at the area
around your current location.
Not all levels of Zoom are available at all times. This ensures that the there is not too much detail on
the screen for the driver to take in while in control of a motor vehicle.
The Zoom level can be set by the driver to a level that they feel comfortable with and see clearly
whist driving.
When it is not possible to either zoom in or out of the map, these buttons will not be shown on the
screen or will be displayed very faintly.
8: Speed and Red Light Camera Alert
These icons are displayed when a known Red Light or Fixed Speed camera is within 250
meters of your current location. Along with the Icon displayed on the screen the sound
of a camera shutter should also be heard when the icon is first shown. (The sound can
be turned on/off through the Trip Options menu.)The icon of the camera is also shown
on the map to indicate the general location of the camera. (Please see number 16)
Warning! While the information about fixed safety cameras is as up to date as possible, new
cameras are being installed on a regular basis. It is the responsibility of the driver of the vehicle to
drive in a legal and safe manner and in accordance with all local laws and regulations.
Zooms in on the map
Zooms out on the map
www.navig8r.com.au
9: Compass
While the map is always displayed according to the direction you are
compass option will show the direction north in relation to the direction of travel. This feature is
handy in Walk Mode
10:
Main Menu Button
This button ope
ns the Main GPS menu for Settings, Route and General Options and
Destination options. It will be displayed in red if Navig8r is in record mode.
Please see The Main Menu Section in this manual
11:
Route Overlay
In Navigation Mode, a coloured path is o
visual indication of the route to be driven as well as the audio instructions and other information for
driving the route
.
12:
Current Speed Indicator/Speedo/Trip Statistics
Button
The current
speed of the GPS unit is displayed in both cruise and navigation modes on the lower bar.
As well as displaying the current speed and time you can access the trip statistics pages
Digital:
Displayed on
this screen are the
Local time and the present spee
d that the
GPS is travelling at,
as calculated from
the satellite signals.
Local time is calculated from the GPS
position and satellite signals. It will
automatically adjust for daylight savings
time in appropriate areas.
All overlays displayed on the ma
in screen
are displayed on this screen.
The
speed will turn red when you are travelling over the posted limit or the personal limit
(whichever is the lower.)
MAIN MAP SCREEN
travelling, the
verlaid on to the calculated route. This gives the driver a
20
www.navig8r.com.au
21
MAIN MAP SCREEN
Analogue:
The Analogue Speedo provides a
more traditional view. The SpeedAlert™
information is shown by marking the speed limit
in red on the dial. This changes as the speed limit
changes.*
This dial provides a quick visual reference for
checking your speed.
Turn overlays and Red/Speed camera warnings
are displayed on this screen.
User defined limits are also displayed and will override SpeedAlert™ data if a lower speed has been
selected.
Tap the Stats button to display the Trip
Statistics page. Displayed first is the “Last
Trip Statistics”. This shows the
information about the current route being
navigated. These pages only function in
navigation mode and the data will be
reset each time a new destination is
chosen.
The information can be manually reset
during the route by tapping the “Reset”
button.
Tap on the button or the button to scroll up and down to see all the information displayed
on this page.
The information displayed is only calculated while the system detects satellite signals and is
explained below.
Speeding
* Shows the amount of time spent over th
e speed limit.
Avg. Speed
Average speed of entire trip including time vehicle is stopped
Avg. Driving Speed
Average speed of the vehicle while in motion
Max Speed
Maximum speed attained by vehicle
Total Time
Total time vehicle has been on trip
Drivin
g Time
Time that vehicle has been in motion on trip
Stopped Time
Time that vehicle or GPS unit has been stopped
www.navig8r.com.au
* The Speeding percentage is based on SpeedAlert
Km/h over the sp
eed limit at any time.
Tap the “All Trips” button for more.
Although the All Trips St
atistics page displays the
same information, it is calculated in a different
manner. This information is calculated from
when the system was turned on or when it was
it was last reset.
Tap the “Reset” b
utton to reset the information
in this page. It will
not reset the information in
the “Last Trip Statistics” page.
Tap the “Back” button to return to the “Speed” screen
13:
Current Position Indicator
The car shown on the map screen to indicate the position of the vehicle. The map is orientate
that direction you are travelling is always towards the top of the screen.
The orientation is fixed and cannot be changed.
14:
Current Road / ETA Indicator
In Cruise mode, the road name of your current location is displayed.
In Navigation Mode,
current road name and the Estimated Time of Arrival to your
destination.
The ETA shows distance to destination in
estimated time to reach your destination.
Total Distance
Total distance travelled for trip
Min Altitude
Minimum altitude the vehicle attained during trip
Max Altit
ude Maximum altitude the vehicle attained during trip.
MAIN MAP SCREEN
™
Data. Text will be red if speed has been 15
.
tap on the road name to toggle between the
Kilometres
22
d so
and the
www.navig8r.com.au
23
MAIN MAP SCREEN
15: Current Speed Limit/ Over Speed warning Icon
Shown on the map in both Cruise and Navigation mode, this icon displays the current speed limit for
the road currently being travelled along. Warnings are given if GPS is detected to be travelling over
the speed limit.
Default Warnings are
Greater than 1 KPH over limit: Icon turns red.
Greater than 5 KPH over limit: Icon Turns red + Single Beep
Greater than 10 KHP over limit: Icon turns red + Double Beep + Voice warning quoting limit.
Greater than 15 KPH over limit: Icon turns red + Triple Beep + Repeated Voice Warning quoting
Speed limit.
These warning can be adjusted in the “Trip Options” Menu.
It is the responsibility of the driver to be aware of the posted speed limit at all times. LaserCo accept
no responsibility for the accuracy of this information contained in the SpeedAlert™ Data
Special Speed Restriction Warning Icons
This icon is only displayed when travelling through known restricted speed zones such as School
Zones and Variable Speed Zones on Motor Way and Toll Roads. Warnings for School Zones are
displayed from Monday to Friday during gazetted restricted times. Warnings may be displayed
during public and school holidays.
16: Speed / Red Light Camera Location
In addition to the Safety Camera Warning Icon (8), the location of the camera is displayed on the
map
Red for Red Light cameras and Blue for Fixed Speed Cameras, these icons are
positioned on the map to show the approximate location of the Safety Cameras.
17: (& 7) Zoom In and Out of Maps
Please see number 7.
www.navig8r.com.au
18:
Scrolling Maps
To view outside of the area displayed on the screen, touch the screen and push away from
the direction you wish to view.
For example: If you wish to see the area be
your current location, place
your finger
screen just above the Position indicator and
draw the finger
towards the bottom of the
screen
The Map will be redrawn to show the
area behind your
current location.
You can use the Zoom in and Zoom
button (7 & 16) to see the map in more
detail or from further out.
When you have finished,
tap on the back
button to return view to the normal
position.
(This feature can only be made when maps are shown in 2D mode)
19:
Waypoint Navigation
Di
splayed only if the Route being used has had waypoints included. Routes calculated from point to
destination only,
will not have this icon displayed.
If you have included waypoints in to your journey
by
turn details for the next waypoint and not the entire route.
Tap this icon to enter the Waypoints screen to adjust your trip as required
MAIN
hind
on the
out
,
the Turn By turn Screen will only display the turn
.
24
MAP SCREEN
www.navig8r.com.au
25
MAIN MAP SCREEN
This screen shows all the waypoints that have
been added to your current trip in the order they
have been entered.
Once you arrive at a waypoint or pass it, it will
automatically be removed from this list.
If the list is larger than the screen please use the
or to scroll up or down the list.
Returns to the previous screen
Remove, add or change the way point order during the trip.
Add a new waypoint to you journey.
Start the trip.
For more information on Waypoints please see page
20: Lane Assist
In Navigation mode only, this icon may be displayed to show what lane you should be in for
an upcoming intersection or turn.
Dark arrows indicate the actual lane to be in, while the light or greyed out arrows show
other lanes at the intersection.
This feature may not be shown at all intersections and is provided as assistance only.
Care should be taken and local road signs must be obeyed especially on roads and
intersections that employ a tidal flow system for lane allocation.
www.navig8r.com.au
The Main Menu
The main menu is present in 2 ways depending on the user preferences.
Modern Menu
When the menu button is tapped
options will slide across the lower section of the
screen from right to left.
This menu wil
l be displayed until the “Back” icon
is tapped or the map area of the screen is
tapped.
Classic Menu
This is the Classic menu.
Select an option as required or tap the Map
button to return to the navigation screen.
Please see 45
for changing menu styles.
Modern
Classic
1
2
3
4
5
6
7
8
, the menu
Action
Create or select new driver profiles.
Enter the address of your
destination or find Points of
Interests
Change the options
and alter t
he look and feel of the
Navig8r
Mute or sound.
Record your driving statistics
for business or
Returns to the map screen.
Cancels the cur
rent trip (in Navigation Mode only)
Exits the Navigation software to the Hardware menu.
26
MAIN MENU
personal use
www.navig8r.com.au
1. Driver Profiles
Set the type of driver that is using the Navig8r and use it to record information from Learner drivers
to fully licensed
drivers using their vehicle for business purposes.
Each user
can create a profile and change the options to suit th
preferences are kept and restored once the profile is selected.
The Select driver screen shows all the dr
that have created a profile on the Navig8r.
To add a new driver tap on the Actions button.
Tap the Stats button to see the Statistics for the
selected drivers.
Tap the Back Button to go back to the previous
screen.
Tap the Action Button to add
a new driver
profile and then the Add button.
Tap the Delete button to remove the
selected profiles. (only shown when 2 or
more profiles are present)
Delete with care as all records for the
deleted driver will be removed and
cannot be recovered.
Us
e the Keypad to enter the name of the
new Driver the profile is to be created for
Once the new profile name has been
entered tap on the OK button to
continue.
Please note that the new profile will
need to be selected after it is created
DRIVER PROFILES
emselves. Each users s
ivers
27
ettings and
www.navig8r.com.au
Select the type of driver that this profile is
for.
Select from a Learner driver
with
limitations to an Unrestricted licence
holder.
Once the correct profile is set with
click on the OK button.
Learner 80:
For drivers on their Learners
Navig8r to 80 kilometres per hour.
Provisional P1:
for P1 license holders. Sets the personal speed limit at 90 Kilometres per
hour.
Provisional P2:
for P1 license holders. Sets the personal speed limit at
hour.
Legal Limits:
For drivers that hold a full license. Uses the legal limits.
Speed Limits are imposed on Learners drivers and holders of Provisional (P1 & P2) license holders in
certain states only. If no limits are imposed by
you are holding and then adjust the
Options” menu.
If driving interstate on Learner or Provisional licenses please check with local authori
restrictions on these types of licences that may apply to you before travelling.
Once a driver has been added
, the Navig8r will
record basic information about the driving. The
information is displayed in hours and minutes as
shown to the right.
For more detailed information the Record
Feature must be used and the reports can then
be printed using the companion software.
Please see later in this manual for more
information.
DRIVER PRO
a
licences
. Sets the personal Speed limit of the
the State of Issue, please select the type of license
“Max. Speed” in the “SpeedAlert Config”
section of the
28
FILES
100 Kilometres per
“Trip
ties about
www.navig8r.com.au
2. The N
avigation menu
Classic Menu
From the
Navigation Menu, you can
search for an address, Points of Inter
Recent Places navigated to
and Favorites
that you have added from previous trips.
Select the required option for selecting
your destination or tap the Back button
to return to the Main Me
nu or the Map
button to go to the Map screen.
Modern Menu
As above. Simply tap Back to remove
from screen.
Entering your Destination by an
There are two ways you can enter the destination address in to the Navig8r
Wizard. A thre
e step process where
number to select a destination.
Quick Step. Add
the street number and then the first 3 letters of the street
town/suburb. T
he Navig8r
has been
entered.
To set the default method of entering the destination addres
Look & Feel menu as described later in this manual.
NAVIGATION
est,
Address
.
by you enter the town/suburb, street and then
will present all availab
le combinations bas
,
s select the preferred method in the
29
MENU
and then
ed on what
www.navig8r.com.au
Entering your Destination by
If the 3
step Wizard is set as default
Step 1: The Town, City or Suburb
Using the
end of your finger
, spell out the
name of the city, town or suburb of your
destination.
After the first 3 letters have been
en
tered, the Navig8r will begin to list the
possible options from those letters.
Continue entering the name to refine the
list.
Tap the
button to enter a space, or
the
button to go back a space if you
have made a mistake.
If the correct destination i
s displayed and
highlighted, tap the “OK” button to
continue to the next step.
To display the entire list at any time, tap
the “List” button to remove the keypad.
If the correct destination is displayed, tap
on the correct listing and then tap the
“OK” button to continue.
Tap the “Keyboard” button to display the keypad again.
Step 2
: The Town, City or Suburb
Once the correct suburb of your
destination has been chosen, use the
same step above to enter the street
name of your destination.
The more le
tters that are entered for the
street name, the more refined the list is.
Use the list option to view more results
or, if the correct street is displayed, tap
on the “OK” button.
NAVIGATION MENU
the 3 Step Wizard
,
tap on the “Address” icon in the Navigation menu.
.
.
30
www.navig8r.com.au
31
NAVIGATION MENU
Step 3: The Street Number or Cross Street
You can now enter the street number of
the destination.
Again the list will show all the possible
listings from the numbers entered. It will
also show all subdivided addresses listed
i.e. 5a or combined blocks; that are
addressed like 6 – 8.
If you do not know the exact number of
your destination, you can choose to enter
the name of the nearest cross street to
your destination. (This feature is only
available via the 3 Step Wizard option)
Once the correct number or cross street
has been entered, tap on the “Ok” button
to continue.
The selected address will be displayed in a
map screen with a shown to mark
your destination.
If the destination shown on the map is
not the correct one, tap the back button
to re-enter the address. Alternatively,
touching a nearby location on the map
will relocate the destination flag. The map
can be moved around.
Once the Destination is confirmed you
are
given the option to add waypoints or
change the Trip Options for this particular
journey.
To start your trip to the set destination
with the default options, press the GO!
Button.
Options are explained on page 28
Via (Waypoints) are explained on page 28
www.navig8r.com.au
Entering Your Destination Using Quick Step Method
The alterantive to using the 3 Step Wizard
as desc
ribed previously is the Quick Step
method.
Enter the street number, the first 3 letters
of the street name, the street type (st, rd,
tce etc.) and the first 3 letters of the
suburb or town of your destination.
For the example used above to navigate to
1
20 Georgiana Terace in Gosford, you
would enter 120 GEO TCE GOS.
If more than one address is possible from
the combination entered, they will be
displayed in list form. To veiw the list tap
the “List” button.
Use the button or the
button to scroll
t
hrough the options and when you have
found the correct address, tap it to
hightlight it and then press the “OK”
button
When entering the destination in either
the “3 Step Wizard” or the “Quick Step”
method, you will notice at the bottom of
the scree
n a button marked “Actions”. This
button can be tapped at any time to enter
the options for your selected destination.
These options allow you to:
Start trip:
Start the trip with only the suburb or town selected. As the location will be
positio
n in the middle of the area selected, the location maker may not be close enough
to a road to calculate a valid route
Show on Map:
This option will display on the map the destination with whatever
information the system has been given. Tap on the “Back”
screen.
NAVIGATION MENU
button to return to the Option
32
www.navig8r.com.au
Tap the “Back” button to return to the previous screen or the “Map” button show the map screen.
As with the 3 Step Mode, your destination
is displayed on the map for you to confirm
or modify before beginning your jou
Once the Destination is confirmed you
given the option to add waypoints or
change the Trip Options for this particular
journey.
To start your trip to the set destination
with the default options,
press the GO!
Button.
Before beginni
ng your trip you are able to change the Trip Options as well as add waypoint to your
journey.
As Favourite:
This option adds the current information to your Favourites List for later
navigation.
View Details:
This will display the address details or your chosen destination including fu
address and altitude/longitude
NAVIGATION MENU
rney.
are
33
ll
www.navig8r.com.au
Change the trip options.
When selected the following options will be denoted by a tick
has been
made, tap the back button to proceed. Tapping the map button will cancel the route and
go back to the map screen.
A: Quickest Route:
Calculates the route for the quickest journey. This option may be
longer but should take less time.
B: Shortest Route:
Calculates the route for the shortest distance between current
location and destination. Even though the distance may be shorter, the journey may take
longer depending on the assigned speed limits for the roads travelled.
C: Walking mode:
The Walking o
Crow flies”. The route will be shown in a straight line to you destination. This feature is
very useful if you are out of the road network or on the water as the Navig8r will always
show you the dire
ct route to where you want to go.
D: Toll Road:
When selected
between the current and selected destination.
E: Camera Alert:
When on, a warning sound will be played when approaching the
location of known fixed safety cameras. Visual warnings are always displayed in both Cruise
and Navigation modes.
F: SpeedAlert™:
Tap to enter the screen for adjusting the Audible alerts for the
SpeedAlert™ Feature. Visual warnings are fixed and cannot
trial version for first use. Trial will not start until this button is tapped and the Navig8r
receives a valid GPS signal
Via (Waypoints)
Once a destination has been selected, it is possible to add a Waypoint to the
is programmed to calculate a route that, based on the your options, will get you to your destination
as soon as possible, this feature
can be used to create a route that is more scenic, avoid an area or
region or simply add a stop i
n at your
NAVIGATION MENU
beside the icon. Once a selection
ption will calculate a route to your destination “As the
it will allow the system to
calculate the route along toll
be turned off. Tap on to enable
.
journey. As the navig8r
favourite rest point on a trip.
34
roads
www.navig8r.com.au
35
NAVIGATION MENU
This option allows you to create a route
with multiple points along the way. These
points can be places you wish to stop or
multiple stops on a journey.
When first used the Waypoint screen will
be blank.
Tap the Add button to add a waypoint to
your journey.
Waypoints are added in the same way
that you would select a destination as
previously described in this manual. One
option is to add “Current Location”. This
adds the current GPS location to the list.
This is useful if you wish to come back the
same way or navigate to something that
you have seen at a later time. Repeat as
required.
When the list is populated you can alter
the order or remove entries by selecting
the entry to change and tap the “Actions”
button.
Only the selected entry will be changed in
this menu.
When the order is selected, tap back to
get to the Start Trip screen to begin your
trip.
Fine Tuning the Destination
When you have entered your address using either the “3 Step Wizard” or the “Quick Step” method
you can fine tune or alter the destination on the screen using your finger. Zoom in or out, scroll the
map, and then pin-point the location on the map to be used as your destination. This is handy if you
do not know the specific address of your destination but know the surrounding area. For example, if
the house is on a known road but you do not know the number but remember that it is opposite a
park.
www.navig8r.com.au
36
NAVIGATION MENU
Enter in as much of the address as
possible, even if it is only the suburb of
your Destination.
Tap the “OK” button until the Destination
is displayed on the map for you to confirm.
You can then use the end of your finger to
tap anywhere on the map. Each time you
tap on the map, the new address will be
displayed on the top bar.
Tap on the button to zoom in on the
map to give more detail or tap on the
button to zoom out to show a greater
area.
You can also drag the map around by placing your finger on the screen and moving it across the
screen. If the finger is dragged to the right of the screen, the map to the left will now be displayed.
You can repeat this at any zoom level, until the area you are looking for is displayed. Zooming in to
the lowest level will allow you the greatest accuracy for a destination.
Tap the screen in the correct location to place the destination marker at the desired location and
then tap the “Confirm” button to start your trip.
Remember when placing the marker, it should be as close as possible to a road. If the marker is
placed too far away from road, the NAVIG8R will not be able to calculate a valid route to the
location.
In some cases, it is possible that the NAVIG8R will display
an “Invalid Trip” message. If this message is shown,
please check that the destination is part of a valid road
network. For instance, it is not possible to travel by road
from Sydney to Hobart. The NAVIG8R can only calculate
routes that are connected by a valid road. The software
does not include tracks or trails that are not officially
part of the Australian road network. Please check the
destination if you have received this message
.
www.navig8r.com.au
For some destinations the route may be too complex to calculate for one trip. It may not be possible
to calculate a rou
te from Melbourne to Broome because
particular destination. We recommend that for Journey such as these, a midpoint is selected for the
first part of the journey and from there the final part of the route will be
Please plan your journey carefully and remember that GPS devices are only meant to be an aid to
navigation around the Australian Road network.
Search for Places (Points of Inerest or POI)
The Search for Places feature allows you
to search
for Points of Interest by
Location, by the Nearest to your current
location or by the Name of the Point of
Interest.
“Nearest On Route” option is only
displayed in navigation mode.
Tap the “Back” button to return to the
previous screen or the “Map” b
utton
show the map screen
Searching By Locality
Tap the “By Locality” button and then
select the type of POI that you are looking
for.
Use the button or the
button to
scroll through the options and when you
have found the right catergory, tap
hightlight it and then press the “OK”
button
, bak to return to the previous
menu or Map to go back to the map
screen
NAVIGATION MENU
of
the complexity and the location of this
calculated.
to
it to
37
www.navig8r.com.au
Enter the name of the suburb or
that you wish to search
and tap the “OK”
button.
Tap the “List/Keyboard”
swap between full list and the Keyboard.
You will be shown a list of Points of
Interests in the selected category in the
surrounding area of the selected suburbs.
Select the Point of Interest that best suits
your requirements and then tap
“OK” button
.
Tap Actions to adjust the route settings as
explained earlier
.
The selected Point of Interest is displayed on the Map. Tap the “Confirm” button to begin the trip
Searching By Nearest
Tap the “By Nearest” button and then
sele
ct the type of POI that you are looking
for.
Use the button or the
button to
scroll through the options and when you
have found the right catergory, tap it to
hightlight it and then press the “OK”
button
NAVIGATION MENU
town
button to
on the
38
.
www.navig8r.com.au
You will be shown a list
of all the Points of
Interest around the area of your current
location.
Select the Point of Interest that best suits
your requirements and then tap on the
“OK” button.
button
The Selected Point of Interest is displayed on the Map. Tap the “Confirm” but
the location.
Searching By Name
Tap the “By Name” button and then
select the type of POI that you are looking
for.
Use the button or the
button to
scroll through the options and when you
have found the right catergory, tap it
hightlight it and then press the “OK”
button
Type in the Name of the Point of Interest
that you are looking for. After the first 3
letters have been entered, a list will be
displayed. You can select from the list or
you can continue to enter the na
refine the list.
Tap on the “List” button and then use the
button or the
button to scroll
through the options.
When you have found the correct Point of Interest that you are looking for, select it and then tap
the “OK” button. Tap the “Confi
rm” button to begin the trip to the location.
NAVIGATION MENU
ton to begin the trip to
to
me to
39
www.navig8r.com.au
Nearest on route
Tap the “On Route” button and then
select the type of POI that you are looking
for.
Use the button or the
button to
scroll through the options and when you
have found t
he right catergory, tap it to
hightlight it and then press the “OK”
button
Displayed will be all the POI found in the
selected category for the next 10
Kilometres
on the current route.
The POI may be slightly off
the current
route.
Tap on button or the
button to
scroll through the available .
Deliveries
Deliveries option
allows the driver to set a delivery run based in order of entry.
Navigation is from current position to next address in the “Delivery Run”. Once that address has
been rea
ched the Navig8r will then calculate the route to the next address in the run.
Addresses are entered as described
above either by direct address or by
select a POI as the delivery address.
Tap Add to include
more delivery points.
The order of the run can
be changed and
delivery points removed by selecting a
delivery point and then tapping the
Actions button.
NAVI
GATION
40
MENU
www.navig8r.com.au
Actions
Recent Places
Each time a destination is selected and a route
calculated,
the destination is automatically saved for
later use. If you wish to go to a previousl
destination again tap on the “Recent Places” button.
The list of recent destinations will be displayed in order
of use. To select a previously used destination, tap on
the address and then on the “OK” button.
When the destination is shown on t
“Confirm” button to begin the trip.
To manage the list of Recent Places, tap on the
“Options” button.
A menu with the following options will be shown. The
menu items are for an action for the currently
highlighted address in the Recent Pl
Clear list:
Clears the entire Delivery List.
Delete Item:
Deletes the selected delivery point from run.
Move Up:
Moves the selected point up the list.
Move Down:
Move the selected point down the list.
NAVIGATION MENU
y used
he map, tap the
aces list.
41
www.navig8r.com.au
Favourites
Destinations can, at the time of selection,
or throug
h the “Recent Places” list, be
saved to the System as “Favourites”. The
Favourites list is for storing commonly
used destination, such as your home or
work address or a
ny other address that
you wish to keep for easy use at a later
time.
The list of Favourites will be displayed in
order of entry.
To select a Favourite, tap on the address
and then on the “Start” button.
When the destination is shown on the map tap t
Start trip:
Start the trip with only the suburb or town selected. As the location will be
positioned in the middle of the area selected, the location maker may not be close enough
to a road to calculate a valid route
Show on Map:
This option will display on the map the destination with whatever
information the system has been given. Tap on the “Back” button to return to the Option
screen.
As Favourite:
This option adds the current information to your Favourites List
navigation.
View Details:
This will display the address details of your chosen destination including full
address and altitude/longitude
Clear List:
The “Clear List” Button will clear all entries in the Recent Places list. If tapped,
you w
ill be asked to confirm YES or NO before the action is taken. Once the list has been
cleared it cannot be recovered.
Delete Item:
The “Delete Item” button will remove only the highlighted address in the
“Recent Places” list. You will be asked to confi
NAVIGATION MENU
he “Confirm” button to begin the trip
rm the deletion.
42
for later
www.navig8r.com.au
To manage the list of Favourites, tap on
the “Actions” button.
The menu with the following options will
be shown.
Favourites can be included by tapping the
“Add” button.
The menu items are for an a
ction for the
currently highlighted address in the
Recent Places list.
Start trip:
Start the trip with only the suburb or town selected. As the location will be
positioned in the middle of the area selected, the location maker may not be close enough
to a road to calculate a valid route
Show on Map:
This option will display on the map the destination with whatever
information the system has been given. Tap on the “Back” button to return to the Option
screen.
Rename: Re
name a destination Such as
recognisable at a later date.
View Details:
This will display the address details of your chosen destination including full
address and altitude/longitude
Clear List:
The “Clear List” Button will
you will be asked to confirm YES or NO before the action is taken. Once the list has been
cleared it cannot be recovered.
Delete Item:
The “Delete Item” button will remove only the highlighted ad
“Recent Places” list. You will be asked to confirm the deletion.
NAVIGATION MENU
Work or home rather than the
address so it is easily
clear all entries in the Recent Places list. If tapped,
43
dress in the
www.navig8r.com.au
Options Menu
The Options menu allows
you to set the
look of the map display
set the general
route options and set the volume level for
the Navig8r.
Tap th
e “Option” button in the Main
Menu to enter the options menu.
Tap the “Back” button to return to the
previous screen or the “Map” button
show the map screen
Look & Feel
The “Look & Feel” setting allows you to set the way the map and keypads look
displayed. Tap the “look & Feel” button to display the available option.
The first group of buttons is for the display of the map. The current options will be flagged by the
on the button.
Thick Style Daylight Maps: 2D (Default)
users of some map books. The maps are easy to read and the colours and layout are
designed for easy visibility in daylight.
Thin Style Daylight Maps:
e
asy to read in daylight.
Thick Style Day Time Maps: (2D)
contrast colours are designed to be easy to see and reduce the intrusive glare while
driving at night or low light conditions.
Thin Style Night
Time Maps: (2D)
glare while still displaying an easy to see familiar map for night or low level light driving.
Thick Style Daylight Maps: (3D)
T
he colours and layout are designed for easy visibility in daylight but laid out in a 3D
format preferred by many users.
OPTIONS MENU
The l
ook of these maps should be familiar to
(2D)
These Maps should also be familiar to some users. Also
In the same style as the Daylight maps, the high
As above, night the colours and contrast reduce the
In the same style as the 2D maps these are easy to read
44
and how they are
.
www.navig8r.com.au
Tap the Back button to return to the previous screen, the map button to return to the Map Screen
or the More But
ton to show more look and feel options.
Tap the Back button to return to the previous screen, the map button to
or the More Button to show more look and feel options.
Thick Style Night Time Maps: (3D)
contrast colours are designe
driving at night or low light conditions.
Compass:
Displays a compass needle on the map screen. The tip of the compass always
points
north in relation to your direction of travel.
Night Day Au
to Setting:
day screen
according to the time of day of your
Digital Speedometer:
format. Please see page 27 for more details
Analogue Speedometer:
f
amiliar format. Please see page 27 for more details.
Advance Turn Assist:
approaching intersection. This is v
(image will vary at each intersectio
Standard:
The Standard view displays an icon that is indicative of the next turn only. This
icon may not truly represent the upcoming turn and is meant as a visual guide only.
(image will vary at each intersection)
QWERTY:
When selected, this will
keyboard.
ABC:
When selected the Keyboard will be displayed with keys is alphabetical order with
starting with the top row.
Classic Menu Style:
The Menus are presented in the classic form. Tap the m
on the map screen to enter the Menu structure.
Modern Menu Style:
along the bottom of the map screen.
OPTIONS MENU
return to the Map Screen
In the same style as the Daylight 3D maps, the high
d to be easy to see and reduce the intrusive glare while
When Selected, the screen will automati
cally change to night
current location.
When selected the Speedometer will be displayed in a Digital
When selected,
the Speedometer will be displayed in the more
If selected can display an accurate representation of the
ery useful
if approaching complex intersections.
n)
show all data entry keyboards as normal computer
The Main menu and some sub menus are displayed as a slide out
45
or
enu button
www.navig8r.com.au
Tap the Back button to return to the previous screen or the map button to return to the Map
Screen.
Trip options
.
When selected the following options w
has been made, tap the back button to proceed. Tapping the map button will cancel the route and
go back to the map screen.
A: Quickest Route
: Calculates the route for the quickest journey. This
but should take less time.
B: Shortest Route:
Calculates the route for the shortest distance between current location
and destination. Even though the distance may be shorter, the journey may take longer
depending on the assigned s
C: Walking mode.
The Walking option will calculate a route to your destination “As the
Crow flies”. The route will be shown in a straight line to you destination. This feature is
very useful if you are out of the roa
show you the direct route to where you want to go.
D: Toll Road
: When selected will allow the system to calculate the route along toll roads
between the current and selected destination.
E: Camera Alert:
When on, a warning sound will be played when approaching the location
of known fixed safety cameras. Visual warnings are always displayed in both Cruise and
Navigation modes.
F: SpeedAlert™:
Tap to enter the screen for adjusting the Audible alert
SpeedAlert™ Feature. Visual warnings are fixed and cannot be turned off. Tap on to enable
trial version for first use. Trial will not start until this button is tapped and the Navig8r
receives a valid GPS signal. Please see next page for details
Wizard:
The Wizard method for entering addresses requires the address to be entered
in a specific manner. That is City/Town, then the street name and finally t
number. While this can take longer, it is the most accurate way to enter a destination.
Quick Step:
By selecting the quickstep method, you only need enter the first 3 letters of
the street and suburb. For example, “6
Park.
If other combinations are available, they will be displayed in the list.
OPTIONS MENU
ill be denoted by a tick
beside the icon. Once a selection
option may be longer
peed limits for the roads travelled.
d network or on the water as the Navig8r will always
s for the
on using
SpeedAlert™
BYF ST MAC” will display 6
Byfield ST Macquarie
46
.
he House
www.navig8r.com.au
SpeedAlert™ Settings
The Navig8r is supplied with the SpeedAlert™ feature. This feature displays the Current Speed Limit
for the road that you are traveling on
The speed limit is shown on the screen as a sta
and audiable warnings to let the driver of the vehicle know if they are going over the speed limit. It
also alerts the driver when the speed zones have changed and what the new zone is
provided by SpeedAlert™.
This feature is provided by SpeedAlert™ More information on coverage and
the following location
.
HTTP://WWW.NAVIG8R.COM.AU/SPEEDALERT.HTM
*Coverage
may not be avaialable in all areas.
Please refer
http://www.speedalert.com.au/coverage.php
Tap the SpeedAlert™ button to enter the settings page.
Dispayed are the optio
ns for enabling or
disabling the audiable warnings for the
SpeedAlert™ feature.
Tap the button to toggle the selection ON
or OFF.
The Visual warnings can not be disabled
and will be show at all times.
SpeedAlert™ Enabled
This button overrides all
alerts.
High Alert
Toggles the Vocal alert for High Over Speed Warnings.
Low Alert
Toggles the Vocal alert for Low Over Speed Warnings.
Camera Alert
Toggles the Vocal alert for Safety camera Warnings.
Speed Change
Toggles the Vocal Speed Limit Change warnings.
Zone Change
Toggles the Zone Change warnings.
Tap the "BACK"
Button to return to the previous screen, the "
"More"
button to adjust the threshold for the Over S
OPTIONS MENU
.*
ndard speed limit symbol. This feature includes visual
updates
.
for cuurent coverage areas.
other settings to disable/enable the audiable
Map"
button to display the map or the
peed warnings.
47
. This feature is
can be found at
www.navig8r.com.au
Use the button or the
button to
adjust the Over Speed warning threshold.
Thresholds cannot be set lower than the
proceeding value. For instance you cannot
set the High Threshold lower than the
Low Threshold.
It is reco
mmended that a minimum of 3
Km/h is kept between each value.
Please note that the “Really high Over Speed” warning cannot be turned off. Please drive carefully.
Max Limit may be preset depending on type of driver profile selected. Navig8r recommend
limit be left in place if restrictions are placed on learners or provisional licenses
If you hold a
license or permit that is not speed restricted the Max Speed Warning can be set to the
maximum speed limit in your
area or turned off
While all
care is taken compiling the data used in this feature
guarantee the accuracy of the speed limits or zones as this data is subject to changes
notification to
SpeedAlert™ or Navig8r.
It is the responsibility of the driver of any vehicle to be aware of the posted speed limit
accordingly. The SpeedAlert™
feature on this device will not include temporary speed limit
reduction for road works or simular.
Sound
Tap the sound button to change the
volume level for the Navig8r.
The
indicates that the sound i
mute the Audio of the
NAVIG8R
the Speaker icon to turn the sound off.
The volume level can bet set by tapping
on the slide bar until the correct volume is
set. This will adjust all audio levels
When
the Volume has been set,
menu.
OPTIONS MENU
.
.
, neither
SpeedAlert™
s on. To
tap on
.
tap the “Back” Button.
The Volume can also be muted from main
48
s that this
nor Navig8r can
with out
s and drive
www.navig8r.com.au
Start Demo
Tap the “Start Demo” button to select and start a demonstration trip to show the
action. This is a useful tool to allow you to get use to the
used to check out settings made in the “Look & Feel” before using it on the road.
Demonstration routes will run at 5 times
the normal speed.
Select the demonstration file you wish to
view and then tap the Start button to
begin.
You can end the demonstration at
any time by tapping the menu button on
the map screen and t
apping the “End
Trip” button.
Tap the “Back” Button to return to the “Options” menu or the “Map” button to return the Map
screen.
Help
The Help screen gives
you a quick overview of the Map
screen in Navigation mode for an on the run guide to
the icons and buttons used on the screen.
Tap the “Contact” button to view the website details
for information and update
s available for
NAVIG8R.
OPTIONS MENU
NAVIG8R in Navigat
ion mode. It can also be
your
49
NAVIG8R in
www.navig8r.com.au
About
The About screen shows Copyright
information about the software and data
used in the Navig8r GPS system.
Use the button or the
button to
scroll through the information.
If you contact
technical support for any reason you may be asked in
this page.
Device ID: Is constant, so too
is the Unique Identifying number of this device. The Software is coded
to this number.
Software version: denotes the version of the
Data Version
: Shows the Map Data and release Date
SpeedAlert: shows the
SpeedAlert™
Tap the “Back” button to return to the “Options” menu.
OPTIONS MEN
formation that is displayed on
Navig8r Navigation Software only.
data version and release date
50
U
www.navig8r.com.au
Record
The record f
eature allow you to record
or
holiday trips. These records ca
You can record wheth
er you are in navigation mode or
Please see the table below for type of information recorded for each selection.
In the main menu,
tap the record ic
Data
Recorded
Date (DD
-
MMM
-
Vehicle registration number
Location to (suburb)
Location from (suburb)
Odometer start
Odometer finish
2
Supervisor Name
Purpose of trip
Time start
3
Time finish
3
Time accredited total
Total hours
Total Kilometres
1: Location to and from information is
name may vary slightly from location Common Name.
2:
Based on Odometer reading entered by user and distance as calculated by GPS during trip. Kilometre value
may vary slightly from od
ometer reading.
3: If recorded trips
are across different time zones please do not adjust time setting until after recording has
finished or reported duration may not accurately reflect trip length.
driving for Learner supervised driving
logs, business expenses
n then be printed out as a report or even shown in Google Earth™.
simply free driving.
on and then the type of recording required.
Free
Driving
Business
Driving
Business
Driving
YY)
1
1
:
Day
Night
based on GPS location at the start and end of
the recorded trip. Suburb
51
RECORD
www.navig8r.com.au
Tap the type of recording that you would
like to start.
When recording is active (all Types) the menu button in the map screen is RED
the recording at any time, tap the record icon in the main menu.
Free Driving
Tapping the Free Driving Recording option begins the recording straight aw
required.
Business Driving
To record business or work trips or for Taxation purposes tap on the Business Driving icon.
You will be presented with this screen to
enter the trip details.
The Purpose and Rego fields
will default
to the last entered information.
Tap on the Change button to change the
information or leave as displayed. The
Odometer must be entered for each trip.
Tap the Back button to return to the previous screen, the map button to cancel and return to the
map screen or the start button to begin recording.
ay. No further input is
52
RECORD
. To end
www.navig8r.com.au
Supervised Driving
To record
supervised driving time for permit or restricted licence holders
Driving icon.
You will be presented with this screen to
enter the trip and supervisor
details.
The Supervisor and Rego fields
will
default to the last entered information.
Ta
p on the Change button to alter
information or leave as displayed. The
Odometer must be entered for each trip.
If the Supervising driver is an accred
that your hours are logged correctly.
Tap the Back button to return to the previous screen, the map button to cancel and return to the
map screen or the start button to begin recording.
Generating Reports
Once the trip has been recorded
Install the Report Generator software supplied on the flash area of the GPS as follows
Connect the Navig8r to your PC using the supplied USB
Wait for the PC to connect to the Device and then open the My Computer Window and locate the
Drive letter allocated to the Navig8r.
Locate and run the Setup_ReportGen.exe file on the Navig8r.
You will need to be logged on to
software.
Software is compatible with Windows based systems running Window 2000 or later. No support is
available for other systems at this time.
,
the
ited teacher ensure that you have checked this option to ensure
data can be printed out or saved as a PDF document on your PC.
cable and turn the Navig8r on.
your PC as administrator and have admin rights to install this
53
RECORD
tap the Supervised
.
www.navig8r.com.au
54
REPORT GENERATOR
Installation
Depending on the security settings on your PC, you may
be shown this screen.
Please click on the Run Button to continue with the
instillation of the Report Generator Software.
Click Next to continue.
Select the destination location of the software.
Click on Browse to select a different location to install
the software.
It is recommended that the path be left as default.
Click Next to continue.
A Start menu folder will be created.
Click on Browse to select different program group to
install the software.
Check the option if you do not wish to have this added to
the Start Menu.
It is recommended that this be left as default.
Click next to continue.
www.navig8r.com.au
55
REPORT GENERATOR
If you do not wish a desk top shortcut to be created
please uncheck the option
Click next to continue.
Confirm the instillation options before installing.
Click on the back button to go back to make changes or
click on the install button to install the software.
When the installation is complete click on the finish
button to Exit the setup.
Uncheck the option if you do not wish the software to
launch on Exit.
www.navig8r.com.au
56
REPORT GENERATOR
Generating Reports
Connect the Navig8r to the PC using the supplied USB cable and ensure that it is turned on. When
connected, the Navig8r screen will display a connection icon.
From the Start Menu or the desk top shortcut, run the Navig8r Report Generator software
Adobe® Reader® (or equivalent) must be installed to view generated reports.
Each time the software is started it checks for updates to
ensure that you always have the latest version
available.*
*requires an internet connection
Please read and follow the onscreen instructions.
Click on the next button to continue.
The software should locate the device and show the
drive letter assigned to the device, the model number
and the last 5 numbers of the device ID.
If the details are correct, check the “Confirmed” box and
click on the next button.
If the details are not correct click on the back button,
check the connection and then click on the “Recheck for
SD Card / USB” button.
www.navig8r.com.au
57
REPORT GENERATOR
The connected Navig8r will be checked and all driver
profiles will be displayed.
Select the driver profile to generate the report for and
then click on the Next button.
You can then select the type of report that you wish to
print out for that profile and then click on the Next
button.
Reports can only be generated if a specific type of report
was selected when recording was started.
Set the date range you wish to include on the finished
report. Click on the icon to display the calendar.
Change the date as required.
Once the range is correct click on the Next button.
Click on the Open button to generate the report.
Click on the Save button to save the generated report.
Select the location and name of the files.
Click on the Back button to change the selected driver
profile or type of report to generate.
Click on the Finish button to exit the software.
The Navig8r will be disconnected from the PC if the Eject option is checked. The Navig8r will need to
re-connect to be accessed again.
www.navig8r.com.au
58
REPORT GENERATOR
The report is generated in PDF format and can be displayed or saved directly to your PC.
Shown here is a sample of a Free Driving report generated for driver profile “P Plate red”.
Each time the Report generator software is run, it will create a back up of the driver profiles and
individual user settings and all recorded log files on the Navig8r.
The backup files are recorded in a folder in the report generated folder
Example: C:\Program Files\Navig8r Report Generator\XXXXX\Mobilenavigator\
XXXX represents the last 5 digits of the Navig8r ID number. This is to ensure that data from two
different devices can be store separately on the same PC.
ACCESSING THE RECORDED FILES
The recorded files cannot be accessed by the GPS and need to be transferred to the computer. We
recommend the tack files are transferred to save space on the limited storage on the GPS.
1 hour recorded travel = approximately 200KB storage. There is enough space to record your entire
driving holiday but the build up of unwanted files may cause problems with the software at a later
stage.
Recorded files are stored on the Device and can be located in the \Mobilenavigator\profiles\”profile
name”\tracks\ folder on the Navig8r.
www.navig8r.com.au
59
GOOGLE EARTH
Displaying your recorded trip on Google Earth*
If you do not have Google Earth installed on your computer, it can be downloaded free of charge
from the following location.
http://earth.google.com
Follow the prompts to install on your computer.
*An internet connection is required for the use of Google Earth.
• Step1. On the top menu bar, select “File” and
then “Open” from the drop down menu.
• Step 2. Use the pull down list to change the
“Files of type” option to show “GPS (*.gpx .loc
*mps)”
• Step 3. Pull down the “Look in” list to navigate
to the folder that contains the files from your
GPS.
•
Step 4.
Each file is named by the system when
saved to incorporate the time and date the files
were created. The time indicates the time the
files were saved and not when the recording
was started.
Files with the “B_” prefix are Business trips
Files with the “S_” prefix are “supervised
driving” trip.
www.navig8r.com.au
60
GOOGLE EARTH
• Step 5. Select the file you wish to display and
click on the “Open” button.
• Step 6. Ensure that all options on the GPS
Data Import page are selected and then click on
the OK button.
Your route will now be overlaid on to the Google Earth maps.
www.navig8r.com.au
61
GOOGLE EARTH
Zooming in will release the points recorded by the Navig8r GPS
Double click on any point to see the details
For further information on importing .gpx or GPS data into Google Earth, please refer to the help
section of this program
www.navig8r.com.au
62
UPDATING THE NAVIG8R
Updating the Software for the Navig8r
From time to time, it may be necessary to update the software for the Navig8r.
Please refer to the http://www.Navig8r.com.au website for detailed information and instructions
concerning the update options for the Laser Navig8r GPS system.
Updates can only be completed on Window Based computers at this time.
An internet connection is required to register the Navig8r and download updates.
www.navig8r.com.au
63
ADD YOUR OWN POI DATA
Adding Your Own Points of Interest (POI) Data to the Navig8r
The Navig8r is supplied with a vast number of Points of Interest but may not include the ones that
are important to you.
There are several sources of Points of Interest files that are available free to download from the
Internet that caters for specific needs. Some of the POI data included has been supplied by
POIDB.COM
http://www.poidb.com and http://gps-data-team.com.au are two sites that offer a variety of POI
files in various formats that have been complied by GPS users in a wide variety of categories.
The Navig8r will read data from OV2 format POI files. (Some purchased files may not be compatible
with the NAVIG8R).
Download the POI file that you want on your GPS to a folder on your computer. The POI data may be
in 2 parts: the data file and an image file that provides an icon for the POIs.
For this example a file for Bowling Clubs in the OV2 format will be used.
Connect you Navig8r GPS to your computer as described in the section “Connecting the GPS to the
computer” in the first part of the manual.
This can be completed by connecting the computer directly or by placing the SD card in the card
reader of your computer.
Locate and open the folder Mobilenavigator > POI. There should be several folders each named for a
category of POIs.
The new file can be added to an existing one or a new folder can be
created for the new POI data. In this example we will be creating a
new folder.
Right Click in the POI folder and the select “New Folder” from the
option menu. When the new folder is created enter the name for the
new category of POI.
Double click on this new folder to open it.
Locate the folder that contains the new POI data to be copied to the
NAVIG8R.
Copy the files and then paste them to the newly created “Bowling
Clubs” folder.
The POI folders can contain several files each; containing information about the location of POI in
the category.
Restart the Navigation software. The New category will now be displayed and can be searched for.
www.navig8r.com.au
64
HARDWARE
Hardware
www.navig8r.com.au
65
MAIN SYSTEM MENU
Main System Menu
To access the Navig8r Main System Menu tap on the Exit button in the Navigation software.
Item Title Description
A Main Title Bar
Displays the curren
t location within the menu structure
B Photo Display
Displays images on the Navig8r or storage card
C Time & Date
Displays Current Time and Dates
D Battery Status
Displays the current battery status
E E Book function
Displays E Books stored on device
or storage card
F Video Icon
Enters the Video playback screen
G Music Icon
Enters the Music playback screen
H Settings Icon
Enter the system settings menu
I GPS Icon
Launches the GPS Navigation software
Note: Prior to launching any features, please ensure that the card is inserted correctly in the SD
card slot on the side of the unit. If the Navig8r has been sitting for a long period without use,
please remove the card from the slot and reinsert the card in the slot. Repeat two or three times
to ensure that good contact is made.
www.navig8r.com.au
66
MAIN SYSTEM MENU
A: Main Title Bar
The Main Title bar displays the title of the screen currently on display.
B: Photo Display
Tap on the Photo icon in the main menu. Select the folder containing the images to display.
Tap the screen to display the control buttons.
Return to folder view
Previous Image
Next Image
Rotation
Zoom In
Zoom Out
Full Screen
Exit.
C: Time and Date
The current time and date is displayed on the top menu bar. System Time is set by Satellite signals.
Users must set Time zone in the settings menu to ensure correct time and Daylight Savings Zones.
If travelling interstate please ensure that the time zone information is set correctly for local time to
ensure that Speed Zone information is displayed correctly.
Time Displayed in the GPS navigation software is calculated from the satellite time code and the
current GPS location and is independent of the system time.
D: Battery Indicator
Indicates the current battery status. Image will cycle during charging.
www.navig8r.com.au
67
MAIN SYSTEM MENU
E: E-Book
Tap on the E Book icon in the main menu. Select the folder containing the E Book files to
display.
Tap the screen to display the control buttons.
Titl e
File name
Return to folder view
Current/Total page
Load Book Mark
Previous
Next
Exit
G: Music
Play
Pause
Stop
Previous file
Next file
Random Play
Repeat Play
Playback time
File name
Status bar
Volume bar
www.navig8r.com.au
68
MAIN SYSTEM MENU
H: Video
Play
Pause
Stop
Previous file
Next file
Random Play
Repeat Play
Tap the screen to toggle control buttons
Return folder view
Exit and return to Main Menu
www.navig8r.com.au
69
SYSTEM SETTINGS
System Settings
Item Title Description
A Volume
Adjust the Volume level
B Language
Sets the language in the main menu*
C Backlight
Adjusts the backlight level for the LCD screen
D Battery Status
Displays the current battery status
E Time & Date
Sets the Time, Date and Time Zon
e
F System Information
Resets the device and the GPS antenna and displays device info
Note: Some of the settings in this menu can be altered by the navigation Software.
www.navig8r.com.au
70
SYSTEM SETTINGS
A: Volume
Tap to increase the volume or to
decrease the volume level.
Check the Tap Sound box to enable sounds for
screen taps.
Tap to return to the previous screen
without accepting the changes.
Tap
to accept the changes.
B: Langauge
Tap the language to be displayed in the main
system menu.
Tap or to return to the previous
screen without accepting the changes.
C: Backlight
Tap to increase the volume or to
decrease the volume level.
Tap to return to the previous screen
without accepting the changes.
Tap
to accept the changes.
www.navig8r.com.au
71
SYSTEM SETTINGS
D: Battery
Displays the current battery level.
Status bar will scroll during charging.
Tap or to return to the previous
screen .
E: Time & Date
Date Set the System Date
Time
Set the System Time
Zone
Set your curre
nt location time Zone
Tap to return to the previous screen
without accepting the changes.
Tap
to accept the changes.
System time and Date is updated automatically when the Navig8r gets a valid GPS signal.
www.navig8r.com.au
72
SYSTEM SETTINGS
F: System Information
The System information screen provides
information about the Hardware and
software versions used in the Navig8r.
Tap or to return to the previous
screen
Displays information about the GPS signal satellite locations and numbers, latitude, longitude, speed
and UTC time.
Use the Reset button to reset the GPS receiver if Navig8r is not responding or detecting satellites
correctly.
Reset the Hardware defaults of the Navig8r. This does not change any settings made in Navigation
Software.
From time to time, it may be necessary to recalibrate the touch screen on this device. It is
recommended that this should be completed prior to first use and then as needed if the screen is
not responding correctly.
Follow the onscreen instruction to recalibrate the touch screen of the Navig8r. It is recommended
that the screen be recalibrated on a regular basis to prevent screen slip and ensure that the Navig8r
responds correctly to inputs.
www.navig8r.com.au
73
SPECIFICATIONS
Specifications
○
Weight: 170G
○
Product size: 138.5mmX83.5mmX12.5mm
○
3.5 inch touch panel (127mm), TFT screen
○
Display colour: 65k colours
○
Display resolution: 320 X 240 Pixels
○
CPU Chipset: SAMSUNG S3C2451 processor 533MHz
○
Operating System: Microsoft WinCE.NET5.0 (Core Version)
○
Built-in Memory: 64 MByte DDR2 SDRAM
○
Audio Format: WMA, WAV
○
Video Format: AVI, ASF
○
Photo Format: JPG, PNG, TIF
○
Battery: 3.7V 1000 mAh Li-Ion Battery
○
Power Input: DC 5V charger (for car)/ Optional 5V USB AC adaptor (not supplied)
○
Expansion Slot: Micro SDHC card Slot (Maximum support: 8 GB)
○
Speaker: Built-In Speaker
○
USB: USB2.0 Mass Storage USB connector (Mini Port)
○
Hot Start : <=3 sec (Open Sky,-130dBm)
○
Warm Start : <=32 sec (Open Sky,-130dBm)
○
Cold Start : <=38sec (Open Sky,-130dBm)
○
Satellite Reacquisition Time Accuracy: 100 Ms
○
Position Accuracy: <5m (Outdoor,-135dBm)
○
GPS frequency 1575.42MHz
○
Sensitivity: -157 dBm
○
GPS Module: High Sensitivity Receiver (NXP GNS7560)
○
Accuracy and velocity < 10 meter, 0.1 m/s
○
Antenna built-in antenna (built-in GPS high sensitivity receiver 42 channel)
○
Firmware upgrade: Micro SDHC card;
○
Operation time (maximum): 2.5 hours (when battery full power)
○
Audio out 3.5 mm stereo jack
○
Operation temperature: -20°C to + 60C°
○
Storage temperature: -20°C to + 80°C
Disclaimer
LASER Corporation reserves the right to make any changes to the software or hardware specifications
without notice as deemed necessary. Information and images provided in this manual may vary from actual
product.
www.navig8r.com.au
74
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions
Q: What is GPS?
A:
GPS stands for Global Positioning System. Officially named NAVSTAR GPS, It is a satellite-based
radio navigation system developed and operated by the U.S. Dept of Defence. GPS is operated and
controlled by the Government of the United States of America, who are responsible for the
availability and accuracy of the system. The system is allowed to be used free of charge.
GPS signals are available to an unlimited number of users simultaneously, and allow users to find
their position on land, sea and in the air, the correct time, and velocity 24 hours a day anywhere on
earth. The first GPS satellite was launched in 1978 and the full constellation of 24 satellites was
achieved in 1994. A GPS satellite weighs in at about 900 kilograms and lasts about 10 years before it
is required to be replaced.
Q: How does GPS work?
A:
The GPS Navigation system is made up of three segments
The Space Segment: This is currently made up of a network of 31 satellites orbiting the earth at an
altitude of approximately 19,000 kilometres and travels at about 11,000 kilometres per hour. They
orbit the earth twice per day along 6 circular orbital planes. They are positioned so that every inch of
the surface of the earth can receive signals from at least 6 of these satellites. GPS satellites transmit
signals constantly. These signals are aimed at earth based receivers such as GPS navigation systems.
Each satellite transmits data about its location and height of orbit and the time that the signal was
sent.
The Control Segment: Is the ground based tracking stations around the world that track and
monitor each satellite in the NAVSTAR system. The tracking information is monitored by the United
States Air Force 2d Space Operations Squadron (2SOPS) at the Schriever Air Force Base in Colorado
Springs. 2SOPS regularly contact each satellite with navigational updates. These updates also
synchronise the automatic clock on each satellite to within one microsecond and update the orbital
data.
The User Segment: is the GPS receiver. This is commonly referred to as a Satnav unit or simply a
GPS. The receiver will obtain information from at least three satellites and calculate the location and
the time it took to receive the signal from each satellite. The receiver then calculates latitude,
longitude, direction and velocity. In conjunction with the map software loaded on to the GPS unit, it
can calculate your exact location, heading, speed and correct time and overlay the results on a map
of the area. The software in the system can also calculate the best route to other locations and give
instructions to the driver on the best route giving fair warning of impending turns. These warnings
can be given visually or audibly depending on the model of the system.
www.navig8r.com.au
75
FREQUENTLY ASKED QUESTIONS
GPS navigation systems require a clear line of sight to work effectively and will not work indoors.
Function may also be impeded in heavily wooded areas and city streets between high rise buildings
that may impede line of sight to satellites.
In conjunction with the map software loaded on to the GPS unit, the system can calculate your exact
location, heading, speed and correct time and overlay the results on a map of the area. The software
in the system can also calculate the best route to other locations and give instructions to the driver
on the best route giving fair warning of impending turns. These warnings can be given visually or
audibly depending on the model of the system. Different models can have a wide variety of
functions and features.
Q: How accurate are GPS systems?
A: In perfect conditions, GPS navigation systems are generally accurate to 3mtrs. Several factors can
impede the accuracy of the GPS unit. These include atmospheric conditions, signal reflection (or
multipath) and clock errors. Most of these errors are small and are usually only apparent when
stationary. Typically a personal GPS unit is accurate to within 15 meters.
The GPS system is only as accurate as the mapping software in the unit. If the map data is incorrect
the visual representation of you location may not be displayed correctly.
Map data is compiled from several sources and may not be 100% up to date. Councils and
regulatory authorities may change road signs, add or remove traffic lights and roundabouts and
change the direction of traffic along roads at any time and these changes may not have been made
at the time the mapping software was complied.
Q: Why does my Navig8r receiver show that I am moving when I am standing still?
A: Occasionally, GPS satellites may broadcast a signal error called Selective Availability (SA). This can
be displayed as up to 4KPH of movement on the GPS receiver.
Q: The GPS unit will not turn on after charging. What can I do to get it working again?
A: In most cases this problem is easy to resolve. Make sure that the GPS is charged or connected to
a power supply. Remove the Mount Cover form the rear of the device and locate the reset button.
Using biro nib or a pin, press the reset button. The GPS unit should now start and load the main
menu. You will need to reset any settings such as the system time and date again.
If the above does not work and the system will not start, please contact the reseller or tech support
support@Navig8r.com.au.
www.navig8r.com.au
76
FREQUENTLY ASKED QUESTIONS
Q: What other factors will affect the accuracy of my Navig8r?
A: While GPS receivers can be quite accurate, there are several factors that can impede the
performance and accuracy of the system. GPS receivers require a clear line of sight to the satellites
to receive the signal.
Bad placement of the receiver in the car can reduce the reception of the signal. This is the most
common cause of poor reception.
Tall buildings in high rise areas such as city streets can impede the signal reception as well as
introducing “Phantom Signals” or Multi Path. These can reflected off buildings and other surfaces,
which make it hard for the GPS receiver to function correctly as it receiving two signals from the
same satellite. This is more apparent when the vehicle is travelling very slowly or at a stop.
Atmospheric conditions such as solar flares and heavily wooded or areas of dense foliage can also
affect the detection of satellite signals.
Q: Can I connect my Navig8r with a Macintosh?
A: The Navigator GPS is detected by computers as Mass Storage devices simular to USB drives. Macs
running OSX 10.2 or later should be able to access the GPS and SD Card Slot by connecting with the
supplied USB cable without the need for any software or drivers to be installed.
Q: My Navig8r is frozen or displays a blue screen, or will not turn on, how do I fix this?
A: Contact technical support.
Q: I cannot find an address!
A: Check the address that you are looking for. The street may be listed as in a different suburb than
your information. Some addresses are given in a “preferred” suburb rather than the actual listed
suburb.
Map data for the Laser Navig8r is sourced from PSMA Australia (formerly Public Sector Mapping
Agencies) and is as up to date as possible.
Q: I can find the street but not the house number.
A: If when entering a destination, the Navig8r cannot find a particular street number but can find
the correct street, try entering a number just above or just below on the same side of the road as
the address you are looking for. For example if you are looking 101 Smith St. but the Navig8r cannot
find it, try looking for 99 or 103 Smith St. House numbers can be spaced differently on one side of
the street to another; the number 100 may be a block or two in either direction.
www.navig8r.com.au
77
FREQUENTLY ASKED QUESTIONS
Q: I have finger prints over the screen of my Navig8r, how do I clean it?
A: The Navig8r can be cleaned by using a soft damp to dry cloth. Lightly wipe the screen and the
case as required. Use another dry soft cloth to make sure that there is no moisture left on the
Navig8r.
Do not use any cleaning products to clean the screen or case of the Navig8r as it may cause damage
to the screen of the finish on the case
Q: Where should I position the Navig8r in my car?
A: There are several factors to consider when mounting the Navig8r in the car for use. The unit
should be positioned to give it the best possible view of the sky. This usually means at the base of
the windscreen just above the dashboard. Make sure that the brackets are secure and the unit is
fitted correctly so that the Navig8r doesn’t come loose while driving. It should also be placed so that
it does not hinder the driver’s vision through the windscreen. It also needs to be visible while in a
normal driving position without having to turn your head or take your eyes of the road while driving.
Q: I find it hard to enter an address while driving, what should I do?
A: The driver of a vehicle should not attempt to enter destinations or change the setting on the
Navg8r while the vehicle is in motion. It is very easy to get distracted. Pull over to the side of the
road when safe and enter the destination.
Q: I received my Navig8r as a gift, I need to send it for repairs. What should I do?
A: The Laser Navig8r is covered by a 12 month warranty from the date of purchase on the GPS unit
only. Accessories are not covered by warranty. Replacement accessories packs are available from
where the Navig8r is sold or online at the Navig8r website.
The Laser Navig8r is covered by a 14 day DOA (Dead on Arrival Period). During this period the
Navig8r should be returned to the place of purchase for a replacement.
After the DOA period, please contact technical support for the warranty process. Please remember a
proof of purchase will be required for any warranty claim.
Q: Why do I sometimes find map errors?
A: While all care is taken, there are a lot of roads out there, and traffic signals, detours etc are
constantly being made to roads. Sometimes the maps may not reflect the true status of the route
shown.
www.navig8r.com.au
78
FREQUENTLY ASKED QUESTIONS
Q: I am having issues syncing with the satellite
A: Ensure that you have clear access to the sky. Turn the unit off and back on again. If the unit has
been turned off for a period of time it can take a few minute to sync with the satellites again.
Q: When I drive in a large CBD area, the GPS drops out or has trouble syncing
A: CBD areas can have a canyon affect on GPS systems. Not only can tall buildings hide the signal
from GPS satellites, it can also reflect the signals of the satellites that can be detected. This makes it
hard for the GPS unit to calculate the correct position. This is more noticeable at slower speeds. Try
moving to an area that gives a better view of the sky.
For further information about you Navig8r GPS and information on accessories please
visit the Navig8r Website at
HTTP://WWW.NAVIG8R.COM.AU
Loading...