NAVICO Steadysteer Hydraulic Flow Switch, SteadySteer Hydraulic Flow Switch with Orb Connection Kit Manual

STEADYSTEER™

INSTALLATION GUIDE

*988-12731-001*

Wiring and conguration

Compliance statements

Europe

Navico declares under our sole responsibility that the
product conforms with the requirements of:

• CE under LVD Direc tive 2014/35/EU

Navico Logistics Europe B.V. Laan van Europa 450,
3317 DB Dordrecht Netherlands

United States of America

¼ Warnin g: The user is cautioned that any

changes or modications not expressly
approved by the part y responsible for
compliance could void the user’s authority to
operate the equipment.

Declarations

The relevant Declaration of Conformity is available
on the following websites:

• www.simrad-yachting.com

Trademark

®Reg. U.S. Pat. & Tm. O, and ™ common law marks.
Visit www.navico.com/intellectual-property to review
the global trademark rights for Navico Holding AS.”

For wiring details refer to the documentation for your autopilot computer.

Before the SteadySteer™ can be used, make sure that the proper autopilot setting
have been congured. Refer to the documentation for your autopilot computer.

System wiring example NAC™ -2

SteadySteer™

ow switch

Power

input

Red

Black

Yellow

Blue

+

-

Power

connector

System wiring example NAC™ -3

Mode

SysselRet

Black Red

SteadySteer™

ow switch

Installation

Min. 20 cm

A B

(7.90”)

A Mount horizontally

B Do not install the SteadySteer™ directly on the helm. Place a hydraulic hose

between the helm and SteadySteer™.

C Mount with a distance of minimum 60 cm (2 ft) from disturbing magnetic

inuences, such as engines, ignition cables, or other large ferrous metals
objects.

Single Helm

A

D

G

E

F

Dual helm

A

B

C

A SteadySteer™ (can

be installed either
on the starboard or
port hydraulic line.)

B Starboard line

C Return line

B

D Port line

E Helm 1

D

C

F Steering cylinder

G Pump

G

H Helm 2

Min. 60 cm

(23.63”)

C

Dimensional drawing

52.4 mm
(2.06”)

(1.23”)

31.25 mm

EH

F

3 m

(10’)

13.8 mm
(0.54”)

(1.00”)

25.4 mm

1/4” NPT female

(both sides)