Page 1
Power supply PS3522
The power supply PS3522 is designed to supply the
Naval cassette amplifier system with 24 V DC, and any of
the Naval active antennas type Mark 20CA, 22CA,
30ALC, 32ALC and VPA 30 with 15 V DC. It has a wide
input voltage range for world wide use and
remote cut-out function.
TECHNICAL SPECIFICATIONS
Input voltage: 100-250 V AC 50-60 Hz
Output voltage: 24 V DC ± 5%
Max output current: 1.5 A
Output voltage to antenna: 15 V DC ± 5%
Max output current to antenna: 500 mA
Max ripple: 25 mV
Input/Output impedance: 75 Ohm
Operation temp.range: -40 - +60oC
Weight: 850 g
EMC: EN 50083-2,EN 60945
LVD: EN 60065
Since 1971, the objective of Naval Electronics has been to offer the
best possible products for TV and Radio reception at sea. Naval
began with omnidirectional antennas and is the world leader in this
field of technology today. Now, with an expanded product range, the
name Naval means much more than antennas. Naval operates in
more than 40 countries and has installations on thousands of
vessels all over the world.
All specifications stated are subject to change without notice.
© Copyright 2003 Naval Electronics AB
RMS
Size: (H) 210 x (W) 82 x (D) 96 mm
Naval Electronics AB
Höjdrodergatan 18, SE-212 39 Malmö, Sweden
Tel. +46(0)40-29 20 45. Fax +46(0)40-18 74 13
E-mail:sales@naval.se www.naval.se
0708
6101
Page 2
Power supply PS3522
Schematic diagram for PS3522
Connection of PS3522
REMOTE CUT OUT
Alt.1) 24 V DC between + and - terminals.
Alt.2) Jumper between GND and - terminals.
NOTE! Only one alternative at the time.
Top gable
Bottom gable
Locking device
Power inlet
100-250 V AC 50/60 Hz
Description Order No. Shippingweight: 1.0 kg
PS3522 201.348 Standard package: 1
Loading...