Current as of 2017-06-01
Instruction Manual for
Battery Pack for Housings
F
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the requirements
of professional as well as amateur underwater photographers and fulfill them
through the innovative designs of our products. We strive to achieve a high
level of user-friendliness by allowing stress-free installation and easy
operation of all important functions of the camera.
Please read this manual carefully before using the product, this will maximize
its performance as well as its lifetime.
W
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for consumer
use. This warranty only applies to products purchased from authorized
NAUTICAM dealers and does not extend beyond the original retail purchaser.
To return your product for service, please contact your regional authorized
service center(s). Please note that this warranty only applies when the product
is purchased in the territory where the service center is located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the inability
to capture images even if it is due to the malfunctioning of our products.
Unauthorized modifications and/or repairs of our products will automatically
invalidate the warranty.
P
RECAUTIONS
• Do not store the product in an environment of high humidity.
• Do not leave the product in direct sunlight for prolonged periods.
• Keep out of reach of children, failure to do so could result in injury.
• Defective products should be shipped to our distributors for service,
unauthorized disassembling and/or modifications could result in malfunction.
P
ACKAGE CONTENTS
•
• 2500mAh Battery Pack
• Micro USB cable
S
PECIFICATIONS
Dimensions:
92mm x 58mm x 6.5mm
Weight:
Approx
.
70g
Capacity:
2500mAh
Input: DC 5V / 1A
Output:
DC 5V / 1.5A
Type: Polymer Lithium
-
Ion Battery
Life Cycle:
Recharge 500 times
Recharge time:
Approx. 2.5hrs
I
DENTIFICATION OF PARTS
I
NSTALL THE BATTERY PACK INTO THE HOUSING
For Sony A6500 camera and #36331:
Connect the micro USB cable to the battery pack and slide into the slot at the
bottom of the housing as shown.
Plug the micro USB cable into the camera’s micro UCB port.
Confirm that the battery pack is active and charging the camera before closing
the housing. The battery level icon in the camera will charge to a socket icon
when external battery is connected.
The battery level indicator on the battery pack will keep on.
Power Input S
ocket
Type: Micro USB
Input: 5V/1A
Battery Level
Indicator
Flashing while charging
Power Output Socket
Type: USB
Output: 5V/1.5A (max.)
Current as of 2017-06-01
For Fujifilm X-T2 camera and #36332
Connect the micro USB cable to the battery pack and slide into the slot at the
bottom of the housing as shown.
Plug the micro USB cable into the camera’s micro UCB port.
When the battery pack is connected to the camera, the indicator lamp of X-T2
will turn on indicating it is charging the internal battery of X-T2. The lamp will
off once the charging is completed.
The battery level indicator on the battery pack will keep on.
--- END ---
Loading...