NAUTICA Yachtimer Instruction Manual
4
YACHTIMER
General Setting
Count Down Function
Chronograph Function
5
Attention:
The measurement of time starts by the count down, then followed by the chronograph.
Small second hand
Push button A
— Start / Stop
Crown position:
1. Normal running
2. Quick correction of
Date; Alarm
3. Correction of Hour,
Minute, Date
Positions
123
Push button B
—Reset
—Count down timer setting
—Second chance count down
adjustment
—Select the display of hours /
seconds counted at the
10H counter
Alarm hand 12h
Minute hand
Date window
Hour hand
Push button C
— Alarm ON / OFF
Hour / second counter hand
To display:
—Count down seconds
— Chronograph hours
—Number of hours and
seconds counted
Central hand
To display:
— Count down minutes
— Chronograph minutes
Count down indicator
(10 minutes maximum)
6
A. SET THE TIME - HOUR, MINUTE, DATE
1. Pull the crown to position 3.
2. Turn the crown anti-clockwise to set the time of the day (hour & minute) and the
date.
3. Push the crown to position 1.
Attention:
* The date changes at 00:00midnight, not at 12:00noon.
* Make sure that the AM/PM is set correctly, or the date will not change correctly.
1. 2. 3.
1
➡
➡
3
3
7
GENERAL SETTING
B. SET THE DATE (QUICK CORRECTION)
1. Pull the crown to position 2.
2. Turn the crown clockwise to move the date to the desired position.
3. Push the crown to position 1.
Attention:
* Do not do quick date correction between 21:00 and 00:30.
1. 2. 3.
➡
➡
1
2
1
8
C. SET THE ALARM (12h)
1. Pull the crown to position 2.
2. Turn the crown anti-clockwise to set the alarm hand to the desired alarm time.
3. Push the crown to position 1.
1. 2. 3.
1
➡
➡
2
2
Loading...