Step 8 : SETTING 2 / BACKLIGHT (BL)
- Press _ and _ simultaneously and hold two buttons
for 1 second, to enter Setting Mode.
- Press 4 times _ to enter Backlight option; and press _ to
change Backlight option.
Backlight can be set to off (disabled), 5 (5 sec), 15 (15 sec),
30 (30 sec), 60 (60 sec), on (never).
When Backlight is set to 5, 15, 30, or 60, scale turns off
backlight in corresponding seconds after it is stable.
When Backlight is set to off, backlight is disabled, and
never turns on.
When Backlight is set to on, scale never turns off backlight,
no matter it is stable or not.
- Push to exit the setting mode.
Step 7 : SETTING 1 / AUTO OFF (oFF)
- Press _ and _ simultaneously and hold
two buttons for 1 second, to enter Setting
Mode.
- Press _ to enter Auto-Off option; and
press _ to change Auto-Off option.
Auto-Off can be set to 0 (disabled), 5 (5
min), 15 (15 min), 30 (30 min), 60 (60 min).
-
Push 4 times to exit the setting mode.
TARE
ZERO
TARE
ZERO
TARE
ZERO
TARE
ZERO
TARE
ZERO
TARE
ZERO
HOLD
UNIT
HOLD
UNIT
HOLD
UNIT
HOLD
UNIT
7
8
SETUP
SETUP
bLoFF
oFF 0
End
End
STB ZERO
STB ZERO
STB ZERO
STB ZERO
STB ZERO
STB ZERO
7
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Instructions for Use
The weighing system must be used with a well-balanced and stable load.