查询LM711AM供应商
MNLM711AM-X REV 1A0
DUAL HIGH SPEED DIFFERENTIAL COMPARATOR
General Description
The LM711 is a dual differential voltage comparator featuring high accuracy, fast response
times, large input voltage range, low power consumption and compatibility with practically
all integrated logic forms. When used as a sense amplifier, the threshold voltage can be
adjusted over a wide range, almost independent of the integrated circuit characteristics.
Independent strobing of each comparator channel is provided, and pulse stretching on the
output is easily accomplished. Other applications of the dual comparator include a window
discriminator in pulse height detectors and a double ended limit detector for automatic
Go-No-Go test equipment.
MILITARY DATA SHEET
Original Creation Date: 10/26/95
Last Update Date: 11/10/95
Last Major Revision Date: 10/26/95
Industry Part Number
LM711AM
Prime Die
LM711AM
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
NS Part Numbers
LM711AMH/883
LM711AMJ/883
LM711AMW/883
Subgrp Description Temp ( C)
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
o
1
MNLM711AM-X REV 1A0
Features
- Fast Response Time
- Low Offset Voltage
- Low Offset Current
- Independent Comparator Strobing
MILITARY DATA SHEET
2
MNLM711AM-X REV 1A0
(Absolute Maximum Ratings)
Storage Temperature Range
Operating Temperature Range
Lead Temperature (Soldering, 60 seconds)
Internal Power Dissipation
(Note 1)
Positive Supply Voltage
Negative Supply Voltage
Peak Output Current
Differential Input Voltage
Input Voltage
Strobe Voltage
Short Circuit Duration
Thermal Resistance
ThetaJA
ThetaJC
MILITARY DATA SHEET
-65 C to 175 C
-55 C to 125 C
300 C
350mWCan
400mWDIP
330mWFlatpack
14V
-7V
50mA
+5V
+7V
0V to 6V
10s
211 C/W H-Package (Still Air)
120 C/W (500LF/Min Air flow)
126 C/W J-Package (Still Air)
70 C/W (500LF/Min Air flow)
250 C/W W-Package (Still Air)
152 C/W (500LF/Min Air flow)
37 C/W H-Package
24 C/W J-Package
42 C/W W-Package
Note 1: Rating applies to ambient temperatures up to 125 C. Above 125 C ambient, derate
linearly at 150 C/W for the Can and Flatpack and 120 C/W for the Dip.
3
MNLM711AM-X REV 1A0
MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc+ = 12V, Vcc- = -6V
SYMBOL PARAMETER CONDITIONS NOTES
Vio Input Offset
Voltage
Iio Input Offset
Current
Iib Input Bias
Current
Avs Voltage Gain 750 V 1
Voh Positive Output
Level
Vol Negative Output
Level
OD Vol Over Driven
Negative Output
Level
Isink Output Sink
Current
Icc+ Power Supply
Current
Icc- Power Supply
Current
Istrobe Strobe Current Vin = 10mV, Vst = 100mV 2.5 mA 1, 2,
Vo(ST) Strobed Output Vst = .3V -1 0 V 1, 2,
CMRR Common Mode
Rejection Ratio
Vcc- = -7V, Rs = 200 Ohms, Vcm = +5V 1 -5 5 mV 1
1 -6 6 mV 2, 3
Vcc- = -7V, Rs = 200 Ohms, Vcm = -5V 1 -5 5 mV 1
1 -6 6 mV 2, 3
Vcm = 0V, Rs = 200 Ohms 1 -3.5 3.5 mV 1
1 -4.5 4.5 mV 2, 3
Vcm = 0V, Rs = 50 Ohms 1 -3.5 3.5 mV 1
1 -4.5 4.5 mV 2, 3
Vcm = 0V 1 10 uA 1
1 20 uA 2, 3
Vout = Vol, Vcm = 0V 75 uA 1
Vin = 10mV, Io = 0mA 2.5 5 V 1, 2,
Vin = 10mV, Io = 5mA 2.5 5 V 1, 2,
Vin = -10mV, Io = 0mA -1 0 V 1, 2,
Vin = 5V, Io = 0mA -1 0 V 1, 2,
Vin = -10mV, Vo = 0V 0.5 mA 1
Vin = -5mV, Vout = Gnd 2 13.3 mA 1, 2,
Vin = -5mV, Vout = Gnd 2 -6.1 mA 1, 2,
Vcc- = -7V, Vcm = +5V, Rs = 200 Ohms 80 dB 1, 2,
PINNAME
MIN MAX UNIT
150 uA 2, 3
500 V 2, 3
0.12 mA 2
0.25 mA 3
SUB-
GROUPS
3
3
3
3
3
3
3
3
3
4
MNLM711AM-X REV 1A0
MILITARY DATA SHEET
Graphics and Diagrams
GRAPHICS# DESCRIPTION
5970HRA2 10LD .230DIA PC TO-100 METAL CAN PKG H (B/I CKT)
6202HRA1 CERDIP (J), 14 LEAD (B/I CKT)
6209HRA1 CERPAC (W), 10 LEAD (B/I CKT)
8356HRA1 10LD .230DIA PC TO-100 METAL CAN H(B/I CKT)
H10CRF 10LD .230DIA PC TO-100 METAL CAN H(P/P DWG)
J14ARH CERDIP (J), 14 LEAD (P/P DWG)
P000030A 10LD .230DIA PC TO-100 METAL CAN H(PIN OUT)
P000110A CERDIP (J), 14 LEAD (PIN OUT)
P000111A CERPAC (W), 10 LEAD (PIN OUT)
W10ARG CERPAC (W), 10 LEAD (P/P DWG)
See attached graphics following this page.
5
Loading...