NATIONAL CONTROLS TNC-T9020 User Manual
National Controls Corporation
1725 Western Drive • West Chicago, Illinois 60185
Toll Free: 1-800-323-2593 • Direct: 630-231-5900 • Fax: 630-231-1377
E-mail: ncc@nationalcontrols.com • Web site:
www.nationalcontrols.com
© 2008, by AMETEK, Inc. All rights reserved. PDF (240023)
Multi-function Food Product Timers
Multi-function Food Product Timers
Multi-function
Multi-function
Eight Channel
Eight Channel
Cooking Timer
Cooking Timer
Product Description
The TNC-T9020 programmable multi-function
eight channel cooking/holding timer offers direct
menu choice, using the operate button, that
allows eight products to be timed at the same
time. Can store up to 50 menu items in the timer.
It can contain the entire menu for food items
along with all operations required to properly
prepare each menu item.
The menu items are displayed on a large
easy-to-ready alpha-numeric display along with
operating prompts and operation times. Menu
items, operation messages, operation times and
other parameters are stored on an EPROM (menu
memory chip). These chips are field replaceable,
making menu additions and deletions easy to
change. Any memory changes made are
maintained in non-volatile memory, and therefore,
are unaffected by power interruptions.
Custom menu and operation software are
available. Consult factory for more information.
Model TNC-T9020 Features
//////
//////
Pre-set cooking times and functions for all food
products.
//////
//////
Audio and visual alert signals with flashing display
messages and six selectable volume levels.
//////
//////
One large, easy-to-read, 16-character dot matrix
display.
//////
//////
On/off switch.
//////
//////
MODE/TIME touchpad button to review operate or
program modes and recovery time.
//////
//////
Eight touch pad multi-functional buttons that
control all functions in operate or program modes.
//////
//////
Red LEDs above each multi-functional button show
which operate or program mode is being
performed.
//////
//////
Multi-channel operation.
//////
//////
Field-programmable time parameters.
//////
//////
Remove function pre- and post-alerts.
//////
//////
Push-button review of all cooking parameters.
//////
//////
Self-test mode function.
//////
//////
Field menu expansion through chip replacement.
//////
//////
Easily readjusts to factory pre-set parameters.
//////
//////
Microprocessor-based electronics with power
failure protection of memory.
//////
//////
Heavy-duty stainless-steel construction.
National Controls Corporation
1725 Western Drive • West Chicago, Illinois 60185
Toll Free: 1-800-323-2593 • Direct: 630-231-5900 • Fax: 630-231-1377 • E-mail: ncc@nationalcontrols.com • Web site:
www.nationalcontrols.com
© 2008, by AMETEK, Inc. All rights reserved. PDF (240023)
Eight Channel
Eight Channel
Cooking Timer
Cooking Timer
Operating Specifications
Operating Voltage: 105-135 VAC, 50/60 Hz
Power Consumption: 20 VA (MAX) Not including auxiliary outlet (Auxiliary outlet 500 watts max)
Display: One 16 Character Vacuum Fluorescent Alpha-Numeric displays plus red LED indicators above operate
buttons (8)
Timing Accuracy: +
0.5%
Audio Alert: 80 db, +
5 db at 3.2 Khz 2 ft. from speaker
Maximum Menu List: 50 menu items with 4 functions per item
Number of Timing Cycles: 8 channels
Dimensions
Free-Standing: W-9.5" x H-5" x D-3.0" (24.13 cm x 12.7 cm x 7.5 cm)
WARRANTY
National Controls Corporation warrants its products for a period of one (1) year from date of receipt by user, but in no event more than
eighteen (18) months from date of manufacture, against defective material or workmanship, but not against damage caused by accident,
abuse, faulty installation, or improper application or operation. During this period, National Controls will, at its option, repair or replace
defective products returned, transportation charges prepaid, to its factory. National Controls shall not be liable for any indirect or
consequential damages. To the extent permitted by law, this warranty is given in lieu of all other warranties expressed or implied, and
National Controls neither assumes nor authorizes any person to assume for it any liability beyond that stated herein.
EXCHANGE PROGRAM
National Controls Corporation offers at no extra charge a special exchange program to minimize "down time" should this product fail.
Simply call our toll-free number and we will send a replacement unit to you immediately. Upon receipt of the exchange unit, immediately
return the defective unit to us via prepaid UPS, using the packing materials and carton in which the exchange unit was sent to you. If the
unit is still in warranty, you pay nothing except the shipping charges to National Controls. If it is not in warranty, you pay repair charges
and shipping cost to and from National Controls. We repair and refurbish the defective unit to "like new" condition. You keep the exchange
unit, and the refurbished unit goes into our special exchange stock. This service is available at no additional cost to every customer in the
continental United States who is registered with National Controls and whose account with National Controls is current.
Multi-function Food Product Timers
Multi-function Food Product Timers
Loading...