National Cart AL-2460-TUCS User Manual
PAGE 1
INSTRUCTIONS FOR INSTALLATION OF CANTILEVER SHELVING
STEP 1. SETUP 4FT SECTIONS, PLACING SHELVES AT REQUIRED HEIGHTS AND ADJUSTING LEG LEVELLERS TO MAKE
SURE SECTIONS ARE LEVEL WITH THE FLOOR. SPACE 4FT SECTIONS 46.5" APART.
STEP 2. ATTACH THE 4FT SECTIONS TO EACH OTHER USING THE CROSS BRACE KIT (CONSISTS OF 2 CROSS BRACES,
8 BOLTS AND 8 NUTS). MAKE SURE ALL HARDWARE IS TIGHTLY FASTENED USING A 7/16" WRENCH.
STEP 3. PLACE SHELVES IN SECTIONS BETWEEN THE 4FT SECTIONS AT REQUIRED HEIGHTS.
4FT SECTION
PART# 8041218
SHELVES
PART# 8041238
46.50" SPACING
CROSS BRACE KIT
(2 CROSS BRACES
AND HARDWARE)
PART# 8040632
4FT SECTION
PART# 8041219
LEG LEVELLER
SHELVES LOCK IN PLACE
AS PICTURED HERE
RECOMMENDED TOOLS:
7/16" WRENCH
SPIRIT LEVEL
NATIONAL CART CO.
A8041218
3125 BOSCHERTOWN RD; ST. CHARLES, MO. 63301
PHONE: 636-947-3800 FAX: 636 -723-4477
STEP 4. DEPENDING ON THE CONFIGURATION LENGTH, THE END OF THE RUN WILL EITHER HAVE
A 4FT SECTION OR A SINGLE UPRIGHT / CROSS BRACE KIT SECTION. ASSEMBLE ACCORDINGLY.
PAGE 2
4FT SECTION
PART# 8041220
SINGLE UPRIGHT / CROSS BRACE KIT
PART# 8041240 / 8040632
SINGLE UPRIGHT
PART# 8041240
CROSS BRACE KIT
PART# 8040632
3125 BOSCHERTOWN RD; ST. CHARLES, MO. 63301
PHONE: 636-947-3800 FAX: 636 -723-4477
NATIONAL CART CO.
Loading...