Nascom NC1012TW-ST, NC1012TT-SWFB, NC1012TT-SW, NC1012TT-STFB, NC1012TT-M Specsheet
...
NC1012T
MINI SCREW TERMINAL SWITCH AND MAGNET SET
DESCRIPTION
Nascom’s NC1012T is a mini surface mount screw terminal wide gap switch and
magnet set set.
The NC1012T is the installer’s choice of contact conguration because the contact
set is designed to cut installation times and helps to prevent false alarms caused
by shifting or warping doors and windows.
The NC1012T Series is designed for vinyl, wood or aluminum doors and windows.
FEATURES
• QUICK CONNECT, EASY TO INSTALL • 3M VHB (Very High Bond) DOUBLE SIDED TAPE
• SCREW TERMINALS • LOW PROFILE DESIGN
• WIDE GAP - N35 NdFeB RARE EARTH MAGNET • LISTED TO UL634 STANDARD
ORDERING INFORMATION
CONTACT RATING
PART
NUMBER
COLOR
OPERATE
GAP
(in inches)
(Max DC/Peak AC Resistive)
SWITCHING CARRY
V I V I
CLOSED LOOP, NORMALLY OPEN, 1FA, SWITCH/MAGNET SET:
NC1012TB/ST
NC1012TG/ST
NC1012TT/ST
NC1012TW/ST
BROWN
GREY
TAN
WHIITE
0.75 to
1.1125
200 VDC 0.5 Amps 10vA 1.5 Amps 150 mOhms
OPEN LOOP, NORMALLY CLOSED, 1FB, SWITCH/MAGNET SET:
NC1012TB/STFB
NC1012TG/STFB
NC1012TT/STFB
NC1012TW/STFB
BROWN
GREY
TAN
WHIITE
0.65 to 1.10 30 VDC 0.2 Amps 3vA 0.5 Amps 150 mOhms
WIRING SCHEMATIC
SWITCH
CONTACT
CLOSED LOOP,
NORMALLY OPEN CONTACT
OPEN LOOP,
NORMALLY CLOSED CONTACT
SWITCH
CONTACT
STATIC
CONTACT
RESISTANCE
(50mV, 100mA)
Royne Industries LLC, dba NASCOM
|
P: 800.843.5530
|
F: 800.727.4041
|
www.nascominc.com
DWG No. 131122-16 Rev. 1
1
DIMENSIONS - IN [mm]
NC1012T
MINI SCREW TERMINAL SWITCH AND MAGNET SET
TOP
FRONT
SWITCH
6.10
.240
3M VHB TAPE
37.85
TYP.
1.490
TOP
FRONT
9.53
TYP.
.375
6.99
TYP.
.275
MAGNET
8.26
.325
3M VHB TAPE
TYP.
TOP
SIDE
9.40
.370
0.25
.010
37.85
1.490
COVER
1.27
R.050
3M 468 ADHESIVE BACK
INSTALLATION INSTRUCTIONS
• Pre-t the switch and magnet in the desired location on the window.
• Clean the mounting surface area for both switch and magnet with alcohol and let dry.
• Remove the liner from the tape on the back of the switch and carefully position the switch on the window frame as close
as possible to the movable part of the window.
• Remove the liner from the tape on the back of the magnet and carefully align the magnet parallel with the switch on the
movable part of the window.
• Apply rm pressure to the switch and magnet housing to ensure proper adhesion to the mounting surface.
• Test alarm system for correct operation.
TYP.
Royne Industries LLC, dba NASCOM
|
P: 800.843.5530
|
F: 800.727.4041
|
www.nascominc.com
DWG No. 131122-16 Rev. 1
2
Loading...