
RF Safety
Test Solutions
50 Years of
Excellence
Electric and Magnetic Field Measurement
Model 8712
Survey Meter
Extremely Easy To Operate
◆
Powerful, Microprocessor Design
◆
Single, 30 dB Dynamic Range
◆
Large-Character Liquid Crystal Display (LCD)
◆
Displays Fields in mW/cm
◆
Percent of International Standards
Small Size, Ergonomic Design
◆
Lightweight
◆
Variable Alarm
◆
2
,W/m2, V/m, A/m, and
Description
The Model 8712 Survey Meter combines an unprecedented ease of operation with powerful measurement capabilities. It is fully compatible with all 8700 series probes.
This cost-effective, small, lightweight meter is ideal for applications that require accurate measurements but not all
the extra features of the Model 8718B Survey Meter. It operates from a standard 9 Volt battery. A shielded, foamlined case that holds both the Model 8712 and two probes
is standard.
Operation
The 8712 was designed with the new or occasional user in
mind so that the most common measurement mistakes
cannot happen.
NO RANGE CHANGES – the meter automatically displays
a numeric value over the probe’s entire measurement
range. The user simply pushes the Probe button until the
arrow points to the full scale measurement range of the
probe. The probe ranges are even color coded on the me
ter to match the color of the probe.
NO CONFUSING SCALES – once you select the probe’s
full scale measurement range you simply read the digital
display, including the units of measure.
NO UNIT CALCULATIONS – simply select the unit of
measure that you want. Only units appropriate to the
probe you are using can be selected.
NO FORGETTING THAT YOU ARE IN THE MAXIMUM
HOLD MODE – the meter clearly displays the word “MAX”
when you are in the maximum hold mode. The digital dis
play shows themaximum value while thebar graph contin
-
ues to indicate the instantaneous value.
LESS CHANCE OF DAMAGING THE PROBE DUE TO AN
OVERLOAD CONDITION – the meter gives both audio and
visual warnings of an over range condition, which greatly re
duces the chance that a probe will be damaged.
-
-
-
NO DIFFICULT ZEROING – just touch the Auto Zero key.
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: NardaSTS@L-3COM.com • www.narda-sts.com
GERMANY TEL: 49-7121-9732-777 • FAX: 49-7121-9732-790 • E-MAIL: support@narda-sts.de • www.narda-sts.de
narda
Safety Test Solutions
communications company
an

RF Safety
Test Solutions
Electric and Magnetic Field Measurement
Specifications
Model 8712
Display
Type
Digital Output
Bar Graph
Units
Controls 8 Key Membrane Keypad
Inputs Probe Cable Input
Zeroing One Touch Auto-Zero
Measurement Range Single, 30 dB Dynamic Range
Units mW/cm2, W/m2, V/m, A/m,
Audible Alarm Probe Overload Warning
Custom Liquid Crystal Display (LCD)
3 1/2 Digits, .44 inch (11mm) Character Height
Select One of Three 10 dB Ranges
Compatible with all Narda 8700 probes
and Percent of International Standards
18 Segments
Custom Legends
Bar Graph Auto Ranges or
a
Variable Alarm from
1% to 100% of full scale
50 Years of
Excellence
Battery
Type
Life (approx)
Size (LxWxD) 7.8" x 2.5" x 1.8"
Weight (approx) 1.4 lbs (0.64 kg)
Temperature
Operating
Non-Operating
Humidity 0% to 90%, Non-Condensing
Accessories Supplied Shielded Storage Casebthat holds Meter and One or Two Probes,
Optional Accessories Insulated Handle/Tripod,
a
Not all units of measure can be displayed when used with Models 8725D (1000 mW/cm2full
scale) and 8760D (100 µW/cm
b
The heavy duty storage case supplied with the Model 8712 Meter is foam-lined and shielded to
protect the meter and probes in storage and in transit. The meter, manual, and up to two probes
can be stored in the case. It is approximately 21" x 13" x 6.3" (53 cm x 33 cm x 16 cm).
Battery, Manual, Probe Extension Cable Model 8744-04
2
full scale) probes.
(19.8 cm x 6.4 cm x 4.6 cm)
Model 8713B Electric Field Attenuator
9V alkaline
50 Hrs.
-20°Cto+50°C
-20°Cto+70°C
narda
Safety Test Solutions
communications company
an
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: NardaSTS@L-3COM.com • www.narda-sts.com
GERMANY TEL: 49-7121-9732-777 • FAX: 49-7121-9732-790 • E-MAIL: support@narda-sts.de • www.narda-sts.de