NAPOLI ELECTRONICS NPL-LED 3230 User Manual

1
CONTENTS
1 PREFACE ····································································································· 2 2 SAFETY PRECAUTIONS ················································································ 2 3 FRONT , BACK AND REAR CONNECTI O N S ····················································· 3 4 TV INSTALLATION GUIDE ············································································ 4
4.3 PC (VGA) INPUT DRAWING ····································································· 4
4.4 HDMI INPUT DRAWING ·········································································· 4
4.7 EARPHONE DRAWING ············································································ 5
5 CONFIGURATION OF THE LED ······································································ 6
5.1 PICTURE SETTING ················································································· 6
5.2 SOUND SETTING ··················································································· 6
5.3 TIME SETTING ······················································································ 7
5.4 LOCK SETTING ······················································································ 7
5.5 SETUP SETTING ····················································································· 8
5.6 CHANNEL SETTING ················································································ 8
USB INSTRUCTIONS ···················································································· 13
6 REMOTE CONTROL INSTRUCTIONS ··························································· 17 7 REMOTE CONTROLS SETUP ······································································· 19
7.1 BATTERY USA GE C A UTION ·································································· 19
8 ACCESSORIES ··························································································· 19 9 TROUBLE SHOOTING AND ADVICE ····························································· 20 10 SPECIFICATIONS ······················································································ 21
2
1 PREFACE
Thank you for buying this LED TV! Please read this manual thoroughly before operating the monitor. Make sure the monitor was not damaged in transit. Should the monitor is damaged, do not install i t and contact your dealer. Check that you have all the accessories according to the model.
2 SAFETY PRECAUTIONS
Put the monitor on a stable surface.
Do not use the monitor with others fixations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.
If you have a wall mount, c heck that it is steady.
Do not bloc k or cover the ve ntilation openings on the monitor
Power source
The monitor must be plugged with a tensi on source of 100-240V and 50/60 Hz.
Connection cables
Power cord and cables must be properly routed and protected to prevent people from stepping on them and ca using the mo nitor to fall.
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources.
Cleaning and maintenance
Unplug the monitor before cleaning it. Do no t use solvents or liquids to clean the monitor. Only clean the monitor with a soft and dry cloth. In case of troubleshooting, does not use spare parts other than those suggested by the manufacturer. Using inadequate spare parts can lead to electric shocks short-circuits fire or other incidents.
Departure in holidays
Unplug the TV during lighting storms or when unused for long periods of time.
3
3 Front , Back And Rear Connections of LED
Front View
Back View
The backview is only for your reference;details according to the model
Rear Connection
1. AV/TV select
2. Menu key
3. Channel up/down
4. Volume up/down
5. STANDBY
6. Remote control sensor
4
4 TV INSTALLTION GUIDE
4.1 CONNECTING ANTENNAS DRAWING
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as show in case of signal of closed circuit TV
4.2 AV INPUT DRAWING
4.3 PC (VGA) INPUT DRAWING
4.4 HDMI INPUT DRAWING
5
4.5 COAXIAL DRAWING
4.6 YPBPR INPUT DRAWING
4.7 EARPHONE DRAWING
6
5 CONFIGURATION OF THE LED
5.1 PICTURE SETTING
Press <MENU> Key, then enter the Menu. a) Press
and enter Picture Setting Menu. Press ▲ or ▼ key and enter Picture ModeContrast
BrightnessColourTintSharpnessColour T em pNoise Reduct ion.
b) Press
or key to access and adjust Picture Mode、Contrast、Brightness、Colour、Tint、Sharpness
Colour T emp、Noise Reduction.
5.2 SOUND SETTING
Press < MENU >, then press
key
a) Press
▼, then enter Sound Setting Menu. Press ▲ orkey to enter Sound
Mode,Treble,Bas s,Balance,Auto Volume,SPDIF Mode,AD Switch.
b) Press
or Key to access and adjust Sound Mode,Treble,Bass,Balance,Auto Volume,SPDIF
Mode,AD Switch.
7
5.3 TIME SETTING
Press <MENU> key, then press
key
a) Press
▼, then enter TIME Setting Menu. Press ▲ or ▼ key and enter Clock,Time
Zone,Region,Sleep Tim er , Auto Standby.
b) Press ◄ or ► key to access and adjust Clock,T im e Zone,Region,Sleep Tim er , Auto Standby.
5.4 LOCK SETTING
Press <MENU> key, then press
key
a) Press
▼, then enter LOCK Setting Menu. Press ▲ or ▼ key and enter Lock System,Set
Password,Block Program,Parental Guidance.
b)Press ◄ or ► key to access and adjust Lock System,Set Password,Block Program,Parental
Guidance.
Note:The initial password is 0000, universal password is 4711
8
5.5 SETUP SETTING
Press <MENU> key, then press►
key.
a) Press
then enter SETUP Setting Menu. Press ▲ or ▼ key and enter OSD Language, Audio
Languages,PVR File System,Caption,Aspect Ratio,Blue Screen,Restore Factory Default,Reset Menu System. b) Press◄or►key to access and adjust OSD Language, Audio Languages,PVR File System,Caption,Aspect Ratio,Blue Screen,Restore Factory Default,Reset Menu System.
5.6 CHANNEL SETTING
Press <MENU> key, then press ►key,
a Press then enter CHANNEL Setting Menu. Press or ▼ ke y and enter Auto Tuning, DTV Manual
Tuning, ATV Manual T uni ng , Programme Edit, Signal Information,Software UpdateUSB.
bPress◄or►key to access and adjust Auto Tuning, DTV Manual Tuning, ATV Manual Tuning,
Programme Edit, Signal Information,Software UpdateUSB.
9
PVR Function list
Item
Record directly
1.Press●button to record the current program. Press to stop recording.
2.File maximum size 3.9G byte , if surpass the capacity
it will divide the file to deposit.
Timer record
1.Use EPG to carry on the appointment record.
2.Support periodicity record /everyday record
/disposable record.
3.When the time appointment is conflict ,it will
produce a warning message.
Disk manager
1.Can delete a single file .
2.Provide Disk formatting functions.
Playback
1.You can play back the recorded program in Media/USB
Channel
Basic instructions
1.The storage location of out file Press ▼ / ▲ button to select Option in the main menu. Press ▼ / ▲ button to select PVR File System, then press OK button to enter. Press ▼ / ▲ button to select Select Disk , then press OK button to enter .
Use the external device(USB/CARD) to do appointment record. You can switch partition in this interface.
2 . Check the USB speed Press ▼ / ▲ button to select Check PVR File System , then press OK button to enter .Then it will check the USB speed.
10
Recording methods
Mode1: Shortcut key
1.Press ●button to record the current program. Press
to stop recording.
2.Press STOP button to stop recording ,the it will return to normal broadcast television.
3.When the storage space of Disk is shortage. It will produce a warning message, then it stops recording automatically and return to normal broadcast television.
4.Press index button to see the information of the recorded list . Press INFO button to see the detail of the program.
NOTE: You can see detail about the DATE/TIME/DURATION/PROGRAM NAME/CHANNEL NAME/DESCRIPTION
Mode2:Time shift
1.Press
button to start Timeshift.
This operation can make the frame still ,and record program at the backstage.
11
Mode3:Timer
1.You can also press EPG button to set record. Press the red button to start recording.
2.You can choose the time of the appointment to record you want
3.When the time appointment is conflict ,it will produce a warning message.
4 . The time of the record is comming . it will change to current channel automatically.
12
Disk manager
1.Press INPUT button to enter input source.
2.Press ▼ / ▲ to choose Media ,press OK to enter.
3. Press red button can delete the recorded program.
13
USB INSTRCUTIONS
Note:Before operating mutilmedia menu,Plug in USB device,then press SOURCE button to set the Input Source to mutilmedia. Press
or button to select mutilmedia in the Source menu, then press OK button to enter.
Press ◄ / ► button to select the option you want to adjust in th e main mutilmedia menu,then press OK
button to enter.
Photo Menu
Press ◄ / ► button to select PHOTO in the main menu, then press OK button to enter. Press menu button to return back to the previous menu and exit menu to quit.
Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter. Press ◄ / ► button to select return option to back to the previous menu.
14
Press ◄ / ► button to select the file you want to watch in the file selecting menu, then press media button to display picture.When highlighting the option you select,the file information will appear on the right and picture will be previewed in the center.
Press ◄ / ► button to select the file folder you want to search in the file selecting menu, then press red or OK button on your remote control to enter sub-menu.
Press ◄ / ► button to select the file you want to delete in the file selecting menu, then press red button on
your remote control and press OK button to delete files.
15
Music Menu
Press ◄ / ► button to select MUSIC in the main menu, then press OK button to enter. Press menu button to return back to the previous menu and exit menu to quit.
Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter. Press ◄ / ► button to select return option to back to the previous menu. When highlighting the option you select,the file information will appear on the right and music will be previewed in the center.
Press ◄ / ► button to select the file you want to watch in the file selecting menu, then press OK button to add the file to playlist,press media button to diaplay and operate file details.
Press ◄ / ► button to select menu in the bottom you want to run, then press OK button to operate. Press menu button to back to the previous menu and exit button to quit the entire menu. Press ▼ button to hide the menu int the bottom.
16
Movie Menu
Press ◄ / ► button to select MOVIE in the main menu, then press OK button to enter. Press menu button to return back to the previous menu and exit menu to quit.
Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter. Press ◄ / ► button to select return option to back to the previous menu.
When highlighting the option you select,the file information will appear on the right and movie will be previewed in the center. Press media button to play the selected movie. Press display button to select menu in the bottom you want to run, then press OK button to operate. Press menu button to back to the previous menu and exit button to quit the entire menu.
Text Menu
Press ◄ / ► button to select TEXT in the main menu, then press OK button to enter. Press menu button to return back to the previous menu and exit menu to quit.
Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter. Press ◄ / ► button to select return option to back to the previous menu.
When highlighting the option you select,the file information will appear on the right and text will be previewed in the center. Press media button to view the selected text. Press display button to select menu in the bottom you want to run, then press OK button to operate. Press menu button to back to the previous menu and exit button to quit the entire menu.
17
6 REMOTE CONTROL INSTRUCTIONS
18
TV Functions
1.POWER: Press the TV on and standby.
2.MUTE: Press to mutes the sound.
3.NUMBER: Numeric buttons for direct channel access.
4. :Sub-channel;example 5/5.1/5.2/5.3…
5.
: go back to the last viewed channel
6.SLEEP: Press to select a preset time interval for automatic shut off.
7.ASPECT:Aspect ratio.
8.MTS:
Choose Mono,Stereo or SAP for analog TV input.Choose Languages for DTV input.
9.P.MODE: Press to select the picture mode.
10.S.MODE: Press to select the sound mode
11. ◄►▲▼, OK:
Use to select on-screen menu items and change menu values
12.EXIT: Exit the menu
13.MENU: Press to display the OSD menu.
14. VOL “+” “-”: Press to increase or decrease the volume.
15.CHANNEL “+” “-”: Press to change the TV channels.
16.SOURCE: Press to display the input source menu.
17.CH.LIST: channel list
18.FAV: Press to display the favorite channel list which you stored before. 19/20/21/22. Colour buttons: Channel Edit function
31.TV/RADIO: Press to change between TV and Radio
32.CC:
Close caption
33.EPG: Electronic Program Guide(EPG) display.
34.SUBTITLE: Display/OFF the subtitle on screen
35.REC.LIST: Tune out the Recordrd List menu
37.AUTO: Auto Adjust in PC Mode.
38.INFO: Show Current Information
PVR Function
25.T.SHIFT:
Timeshitf function
36.REC
Press this button to directly record the DTV into USB disk
USB Functions
19/20/21/22. Colour buttons:Media function
23.REPEAT: Repeat chapter , track
24.
:STOP
25.
:PLAY/PAUSE
26.A-B: repeat point A to point B when selected
27.
: Previous key
28.
: Next key
29.
: Fast return key
30.
:Fast forward key
19
7 REMOTE CONTROLS SETUP
a: Open the cover b: AAA size batteries, When inserting the batteries, make sure correct polarities as per”+“and ”-“marks on the batteries and within the battery compartment
c:Replace the battery cover
7.1 BATTERY US AG E C AU TI ON:
To prevent battery leakage this may result in bodily injury or damage to the r emote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries :(OLD a nd NEW or CAR BON and ALKALINE, etc.).
3. Remove batteries when the remote is not used for a long time.
8 ACCESSORIES
1. One Remote Control 2 .Two Batteries 1.5V
3. One User Manual
20
9 TROUBLE SHOOTING AND ADVICE
Before calling our SAS centre, please check if you can solve the troubleshooting by yourself.
Troubleshooting Control
No signal Please check that all cables and cordons are correctly plugged in.
No color shades Adjust the contrast, the c olour and the brightness
Stain show on the
screen.
May be result from a lighting signal from car, motor, neon light and other electrical devices or appliances.
Double or multiple
display image
May be the result of an electrical wave disturb from other TV, Computer and Game machine or Radio
Snow on the screen The cables of the antenna are not correctly plugged in.
The remote control does
not work
Please check the batteries order and alignment. Check that the IR of the remote control is not hidden by something.
"Zip" made noise on TV
cover
Even if the display image is correct, the noise may come from an
unsteady fixation of the panel.
No sound
Make sure that you have not pre ss the MUTE butto n of the panel or o f the remote control.
21
10 SPECIFICATIONS
Screen Size 32Inch Display Type TFT LED TV Aspect Ratio 16:9
Power Source
110-240V,50/60Hz
60W TV System PAL / SECAM Video Input Format PAL / NTSC/SECAM Antenna Input Standard antenna socket 75 Ω Audio Output L / R 10W*2
Input
AV
Video:1.0Vp-p, 75Ω; Audio20kΩ; RCA
PC Standard VESA mode HDMI MAX 1080P
YPbPr 1.0Vp-p 75Ω;RCA,MAX 1080P
Output Audio L/R 200mVmrs (max3.0vp-p) 20KΩ RCA Net W eight
12±1Kg Net Dimensions With Stand(L*W*H) 782*186*571mm
Net Dimensions Without Stand(L*W*H) 782*52*484mm
The manual is only for your reference; any changes to the design and
specification will not be advised.
Loading...