Napoleon OASIS MODULAR CABINET User Manual

1

www.napoleongrills.com

EN

Napoleon Appliance Corp.,

214 Bayview Dr., Barrie, Ontario, Canada L4N 4Y8 Phone: [phone]

Fax: [phone] email: [e-mail] web site: www.napoleongrills.com

N415-0256 APR 26/12

OASIS MODULAR CABINET PLANNING GUIDE

RETAIN THIS MANUAL FOR FUTURE REFERENCE.

2

www.napoleongrills.com

EN

IM-UGC300 245/300 UNDER GRILL CABINET

35”

(889 mm)

24”

(610 mm)

24”

(610 mm)

- under grill cabinet required for BIM485 units

- grill head not included

- 2 drawers on roller slides

- rear and side panels have removable knockouts for gas piping

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

IM-UGC485-1 485 UNDER GRILL CABINET

35”

(889 mm)

24”

(610 mm)

34.750”

(883 mm)

- under grill cabinet required for BIPT450 / BIPRO450 units

- grill head not included

- 2 drawers on roller slides

- rear and side panels have removable knockouts for gas piping

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

IM-UGC450 450 UNDER GRILL CABINET

- under grill cabinet required for BISZ300 or BISB245 units

- grill head not included

- 2 drawers on roller slides

- rear and side panels have removable knockouts for gas piping

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

35”

(889 mm)

24”

(610 mm)

33.750”

(857 mm)

3

www.napoleongrills.com

EN

35”

(889 mm)

24”

(610 mm)

34.750”

(883 mm)

- under grill cabinet required for BIP500 / BIPRO500 units

- grill head not included

- 2 drawers on roller slides

- rear and side panels have removable knockouts for gas piping

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

IM-UGC500 500 UNDER GRILL CABINET

IM-UGC600 600 UNDER GRILL CABINET

- under grill cabinet required for BIPT600 / BIPRO600 units

- grill head not included

- 2 drawers on roller slides

- rear and side panels have removable knockouts for gas piping

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

35”

(889 mm)

24”

(610 mm)

42”

(1067 mm)

IM-UGC605 605 UNDER GRILL CABINET

- under grill cabinet required for BIM605 units

- grill head not included

- 2 drawers on roller slides

- rear and side panels have removable knockouts for gas piping

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

35”

(889 mm)

24”

(610 mm)

40.500”

(1029 mm)

4

www.napoleongrills.com

EN

IM-UGC750 750 UNDER GRILL CABINET

IM-3DC 3 DRAWER CABINET

- 3 drawers on roller slides

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

35”

(889 mm)

24”

(610 mm)

24”

(610 mm)

35”

(889 mm)

24”

(610 mm)

47.250”

(1200 mm)

- under grill cabinet required for BIM730 units

- grill head not included

- 2 drawers on roller slides

- rear and side panels have removable knockouts for
gas piping

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

IM-UGC730 730 UNDER GRILL CABINET

53.750”

(1365 mm)

35”

(889 mm)

24”

(610 mm)

- under grill cabinet required for BIPT750
units

- grill head not included

- 4 drawers on roller slides

- rear and side panels have removable
knockouts for gas piping

- stainless steel drawer fronts

- adjustable leveling feet

- shipped fully assembled

5

www.napoleongrills.com

EN

IM-2DC 2 DRAWER CABINET

IM-WDC WASTE DRAWER W/PAPER TOWEL HOLDER

- 1 waste drawer on roller slides

- sturdy removable waste bucket

- top level enclosed paper towel holder

- stainless steel drawer fronts

- adjustable leveling feet

- cannot be used under oponal side burner or sink

- shipped fully assembled

IM-UTC PROPANE TANK CABINET

- propane tank storage cabinet

- stainless steel door front

- universal door, right or le opening

- pullout shelf for easy propane tank installaon

- adjustable leveling feet

- shipped fully assembled

- 2 drawers on roller slides

- stainless steel drawer fronts

- adjustable leveling feet

- top drawer is a false drawer

- use this when installing a sink or side burner above the
cabinet

- shipped fully assembled

35”

(889 mm)

24”

(610 mm)

24”

(610 mm)

35”

(889 mm)

24”

(610 mm)

24”

(610 mm)

35”

(889 mm)

24”

(610 mm)

24”

(610 mm)

6

www.napoleongrills.com

EN

IM-FHL/FHR FRIDGE CABINET

- stainless steel door (FHL-hinge le, FHR- hinge right)

- cannot be used under oponal side burner or sink

- adjustable leveling feet

- shipped fully assembled

IM-45T 45 DEGREE TRANSITION

35”

(889 mm)

18.375”

(467 mm)

- painted transion panels to join 2 cabinets at 45 degree
angle.

- can be doubled up to create 90 degree transion

- if a transion is used directly beside a grill, an IM-2DC
(2 drawer module must be used on the other side of the
transion (other drawer/door modules may interfere
with the grill control panel.)

- reversible door, le or right opening

- stainless steel door

- excellent outdoor storage

- adjustable leveling feet

- shipped fully assembled

IM-UDC UNIVERSAL DOOR CABINET

35”

(889 mm)

24”

(610 mm)

24”

(610 mm)

35”

(889 mm)

24”

(610 mm)

24”

(610 mm)

7

www.napoleongrills.com

EN

- painted end panel

- used at the end of run of cabinets to cover knockouts
and mounng holes

IM-CEP END PANEL

IM-IBA ICE BUCKET HOLDER

- stainless steel tray

- ts on top of standard drawer

- holds standard stainless steel serving trays large
to small combinaons

- painted panels

- maintain required oset for installaons t against wall of
house or landscaping (for lid to open)

-clearance to combusbles must be maintained according to
the rang plate on the grill

- block o gap between cabinet and house

31”

(787 mm)

24”

(610 mm)

2”

(51 mm)

16”

(406 mm)

1.188”

(30 mm)

19.125”

(486 mm)

35”

(889 mm)

4”

(102 mm)

1.500”
(38 mm)

IM-WSF WALL SPACER

8

www.napoleongrills.com

EN

PLANNING YOUR NAPOLEON MODULAR OUTDOOR ISLAND

The Napoleon Outdoor Modular Island series has been developed with versality in mind. The cabinets can be assembled
in virtually any combinaon to suit your individual needs. They can be assembled against a house wall or as a standalone
island, becoming the focal point of your backyard. With mul-funcon and storage capabilies, your backyard island can be
transformed into an outdoor kitchen, placing the host in the center of the acon when entertaining guests.

The cabinets are designed to be easy to assemble and install for either the home owner or private contractor. All cabinets
are 35” (889 mm) tall by 24” (610 mm) deep. All cabinets are 24” (610 mm) wide except for the BUILT-IN grill cabinets
whose width correspond to the width of the unit it was designed for. Each cabinet has 4 leveling feet for adjustment on
even surfaces. The 2 drawer cabinets are made to t the Napoleon BUILT-IN series of grills only, available in several dierent
sizes. BUILT-IN grills come in several dierent sizes. Refer to the installaon manuals that come with the grill head for
proper installaon and operang instrucons.

The BUILT-IN series of grills can be ordered in your choice of propane or natural gas conguraon. Natural gas is an obvious
selecon for many people that already have it available in their home. All gas modicaons or installaons must be done
by a qualied gas installer. Knockouts are present in the side and rear panels for easy piping and installaon. For those who
order a propane grill, a propane tank cabinet is available.

The cabinets can be installed against a NON-COMBUSTIBLE wall of a house, a masonry or stucco half-wall, or freestanding
in an island conguraon. An oponal 4” (102 mm) spacer panel must be purchased and installed when placing an island
against a wall to allow clearance for the grill lid to open. The spacer also provides closure for the cabinet to prevent debris
or rodents from entering behind the cabinets. A powdercoated, 2” (51 mm) wide end panel can be purchased to cover the
knockouts and mounng holes in the outside panels in a run of cabinets, giving a more nished look.

When ulizing 45o and 90o transions in your design, modules on either side of the transion need to be chosen carefully.
If doors or drawers are used on either side of the transion, they will interfere with each other when opened. If a drawer
module is placed next to a grill, the control panel on the grill will prevent the top drawer from opening. The same applies
to the paper towel/garbage module. Door modules can be used with 45o transions, but the control panel will prevent
the door from fully opening and may damage the door. The best module for this applicaon is the 2 drawer module (false
drawer at the top).

Oponal built-in sideburner kits are available through your Napoleon Gas Grill dealer. These sideburner kits are an excellent
complement to the BUILT-IN series of grills. We recommend that the sideburner kit be installed over top of the IM-2DC
cabinet.

It has the false drawer front at the top of the cabinet which allows clearance for the sideburner valve and hose
roung. The IM-2DC cabinet also provides the necessary clearance for those who would like to install a sink in their
outdoor kitchen.

Countertops must be ordered and supplied locally by the homeowner. The countertop material must be NON-COMBUSTIBLE
if a grill is to be installed into it. They can be ordered in advance by drawing out the oorplan of how the cabinets will
be situated and adding up the width measurements, allowing 1-2 inches (25 mm-51 mm) of countertop overhang. Most
countertop manufacturers are willing to come and take measurements aer assembly of the cabinets is complete to ensure
a perfect t. For best results the countertop thickness should be between 1/2” (13 mm) to 1 1/2” (38 mm) thick. The
built-in grillhead comes with stainless steel brackets and hardware that allow the unit to rest on the countertop above the
corresponding island cabinet for that unit. Granite or Corian are excellent choices of countertop materials. Decorave
countertops made of ceramic le set on top of cement ling board can be made to match your surrounding backyard
furniture colors.

9

www.napoleongrills.com

EN

EXAMPLE 1: 605 BUILT-IN ISLAND AGAINST NON-COMBUSTIBLE WALL

The above example is shown built against a non-combusble house wall. Below, the dashed line represents the perimeter
of the countertop (not supplied). It has the IM-WSF kit in 2 places which stands the unit of from the wall the required 4”
(102 mm) to create clearance for opening the lid of the grill. The WSF (wall spacer kit) does not provide enough oset to

allow the unit to be placed against a combusble wall. The clearance marked on the rang plate of the grill sll needs to
be maintained. The kit extends from the countertop to the pao or deck surface, blocking o the area behind the island,

prevenng debris from entering behind the cabinet. Also shown is the IM-CEP, end panel, which creates a nished look to
the ends of the assembled cabinets by covering the exposed knockouts and mounng holes.

*Other grill heads can also be substuted. Ensure the under grill cabinet corresponds to the unit.

MODULE DESCRIPTION QTY SUBSTITUTE DESCRIPTION QTY

IM-UGC605 UNDER UNIT CABINET 605 1

BIM605RB-N MIRAGE 605 BUILTIN NATURAL 1 BIM605RB-P MIRAGE 605 BUILTIN PROPANE 1

IM-UDC SINGLE DOOR CABINET 1 IM-UTC PROPANE TANK CABINET 1

IM-3DC THREE DRAWER CABINET 1

IM-CEP CABINET END PANEL 2

WALL OF HOUSE

IM-WSF

IM-WSF

IM-3DC

IM-UDC

IM-CEP

IM-CEP

IM-UGC605

GRILL NOT INCLUDED

*
*

10

www.napoleongrills.com

EN

EXAMPLE 2: 605 BUILT-IN ANGLED ISLAND

The above example is shown built as a stand alone island. Below, the dashed line represents the perimeter of the
countertop (not supplied). The unit is angled by applying the IM-45T kit on either side of the unit which rotates the side
cabinets at a 45o angle. Also shown is the IM-CEP, end panel, which creates a nished look to the ends of the assembled
cabinets by covering the exposed knockouts and mounng holes.

IM-45T

IM-2DC

IM-CEP

IM-UDC

IM-CEP

IM-UGC605

GRILL NOT INCLUDED

IM-45T

MODULE DESCRIPTION QTY SUBSTITUTE DESCRIPTION QTY

IM-UGC605 UNDER UNIT CABINET 605 1
BIM605RB-N MIRAGE 605 BUILTIN NATURAL 1 BIM605RB-P MIRAGE 605 BUILTIN PROPANE 1
IM-UDC SINGLE DOOR CABINET 1 IM-UTC PROPANE TANK CABINET 1
IM-2DC TWO DRAWER CABINET 1
IM-45T 45 DEGREE PANEL KIT 2
IM-CEP CABINET END PANEL 2

*Other grill heads can also be substuted. Ensure the under grill cabinet corresponds to the unit.

*
*

11

www.napoleongrills.com

EN

EXAMPLE 3: 605 BUILT-IN ANGLED ISLAND

The above example is shown built as a stand alone island. Below, the dashed line represents the perimeter of the
countertop (not supplied). The unit is angled by applying the IM-45T kit between the cabinets which rotates the side
cabinets at a 45o angle. Also shown is the IM-CEP, end panel, which creates a nished look to the ends of the assembled
cabinets by covering the exposed knockouts and mounng holes.

IM-45T

IM-3DC

IM-CEP

IM-UGC605

GRILL NOT INCLUDED

IM-WDC

IM-CEP

IM-FHL

IM-UTC

IM-45T

MODULE DESCRIPTION QTY SUBSTITUTE DESCRIPTION QTY

IM-UGC605 UNDER UNIT CABINET 605 1
BIM605RB-P MIRAGE 605 BUILTIN PROPANE 1 BIM605RB-N MIRAGE 605 BUILTIN NATURAL 1
IM-UTC PROPANE TANK CABINET 1 IM-UDC SINGLE DOOR CABINET 1
IM-FHL FRIDGE CABINET LEFT 1 IM-FHR FRIDGE CABINET RIGHT 1
IM-3DC THREE DRAWER CABINET 1
IM-WDC WASTE DRAWER CABINET 1
IM-45T 45 DEGREE PANEL KIT 2
IM-CEP CABINET END PANEL 2

*Other grill heads can also be substuted. Ensure the under grill cabinet corresponds to the unit.
Danby model DAR-259W (white) or DAR-259BL (black).

*
*

12

www.napoleongrills.com

EN

EXAMPLE 4: 605 BUILT-IN 90° ISLAND AGAINST NON-COMBUSTIBLE WALL

The following example is shown built against a non-combusble house wall. Below, the dashed line represents the
perimeter of the countertop (not supplied). It has the IM-WSF kit in 4 places, which stands the unit of from the wall the
required 4” (102 mm) to create clearance for opening the lid of the grill. The WSF (wall spacer kit) does not provide enough

oset to allow the unit to be placed against a combusble wall. The clearance marked on the rang plate of the grill sll
needs to be maintained.

The kit extends from the countertop to the pao or deck surface blocking o the area behind the island, prevenng debris
from entering behind the cabinet. The 90° bend in the cabinet is created by aaching together 2 IM-45T kits, which also
lend support to the countertop. Also shown is the IM-CEP, end panel, which creates a nished look to the ends of the
assembled cabinets by covering the exposed knockouts and mounng holes.

13

www.napoleongrills.com

EN

WALL OF HOUSE

WALL OF HOUSE

IM-45T

IM-WSF

IM-WSF IM-WSF

IM-WSF

IM-CEP

IM-WDC

IM-3DC

IM-3DC

IM-UDC

IM-CEP

IM-UGC605

GRILL NOT INCLUDED

MODULE DESCRIPTION QTY SUBSTITUTE DESCRIPTION QTY

IM-UGC605 UNDER UNIT CABINET 605 1
BIM605RB-N MIRAGE 605 BUILTIN NATURAL 1 BIM605RB-P MIRAGE 605 BUILTIN PROPANE 1
IM-3DC THREE DRAWER CABINET 2
IM-UDC SINGLE DOOR CABINET 1 IM-UTC PROPANE TANK CABINET 1
IM-WDC WASTE DRAWER CABINET 1
IM-WSF WALL STANDOFF KIT 4
IM-45T 45 DEGREE PANEL KIT 2
IM-CEP CABINET END PANEL 2

*Other grill heads can also be substuted. Ensure the under grill cabinet corresponds to the unit.

*
*

14

www.napoleongrills.com

EN

PLANNING PAGE

PAGE DE PLANIFICATION