NAPCO NP-CC24AC4UL User Manual

R

333 Bayview Avenue

Amityville, New York 11701
For Sales and Repairs, [phone]
For Technical Service, [phone]

© NAPCO 2005

DESCRIPTION

The NP-CC24AC4UL provides 24VAC via distribu­tion to 4 fused outputs for a total of 4.0A continuous
supply current. The NP-CC24AC4UL is both a dis­tribution module and a CCTV power supply, and has
4 individually fused outputs for powering video de­vices such as CCTV cameras and other accesso­ries.

FEATURES

• Listed (UL 2044)

• Input 115VAC 50/60 HZ, 0.9 Amps

• 4 Amps 100VA supply current

• Four 24VAC individually fused outputs

• Output fuses are rated at 3 Amps

• Main fuse is rated at 5 Amps

• Surge protected outputs

• AC power LED indicator

• Individual LED’s for each output

• Power ON/OFF switch

• Spare fuses included

• Unit maintains camera synchronization

• Ease of installation saves time and eliminates

costly labor

INSTALLATION INSTRUCTIONS

1. Mount the NP-CC24AC4UL in desired location

and secure

2. Slide switch to OFF position

3. Connect the AC 115VAC 50/60Hz to the black

and white flying leads of the transformer Con-

nect the green to an earth ground

4. Connect each camera to terminals 1 to 4

marked 1 to 4 (+ & -)

5. Slide switch to ON position

6. Green LED will illuminate when AC power is

present

7. Red individual LED’s will light when cameras

or accessories are present and powered

8. Upon completion of wiring secure enclosure

door with catch.

WARNING:
To reduce the risk of electric shock, do not ex­pose this product to rain or moisture. For con­tinuous protection against hazard, replace only
with same type and rating of fuse.

NP-CC24AC4UL

4 CAMERA 24VAC

POWER SUPPLY

WI1334A 12/05

Enclosure Dimensions

APPENDIX LIST

Item Description Dimension Volume Memo

1 Instruction Sheet A4 1
2 Wire 18AWG 28cm 1 Black
3 Wire 18AWG 28cm 1 White
4 Wire 18AWG 28cm 1 Blue
5 Wire 18AWG 28cm 1 Yellow
6 AC CORE 180cm 1
7 Linear Transformer 110VAC/24VAC, 100VA 1