Model: N86T
V01
R86B
R86B
N86T
N86C
Secu rity
Secu rity
Innovation
Innovation
Technology
Technology
Vogue
Vogue
In s tall atio n a nd Ope rati o n Guid e
N86T Touch module control
N86C Curtain control
Model: N86C
T
V
T
V
T
V
TV
Touch keypad 1(light line 1) on the module (N86T)
-Turn on the first line of light. Touch the same
keypad to turn off the first line of light.
Touch keypad 2 (light line 2)
on the module (N86T) - Turn
on the second line of light.
Touch the same keypad to
turn off the second line of
light.
Light line 1 and line 2 can
also be controlled by a remote
control (R86B), when R86B
is connecting with this N86T.
Light control
Curtain control
Touch keypad 1 on the module (N86C) - Turn on
the curtain. The curtain will stop turning on when
touch the same keypad.
Touch control key 2 on the
module (N86C) - Turn off the
curtain. The curtain will stop
turning off when touch the
same keypad.
The curtain can also be
controlled by a remote
control (R86B), when
R86B is connecting with
this N86C.
NOTICE：
Indicator light of N86T/N86C is on means the line
is disconnected.
Indicator light of N86T/N86C is off means the line
is connected.
After the power is recovered from power cut, all the
lines are disconnected from N86T/N86C ( Indicator
lights of N86T/N86C are on).
96 mm
96 mm
96 mm
40 mm
Temperature: -20-+50℃
AC 100~230V 50/60Hz
2.4-2.499G Hz
＜1W
87 mm
87 mm
31mm
R86B
10S
800W
N86T/N86C appearance diagram
Technical parameters
Keypads 1
Keypads 2
Indicator light
Indicator light
Basic functions
RH≤90%
Working
environment
Voltage
Power consumption
Receive frequency
Maximum load
Manual touch control
Remote control
Set route from 1 to 98
by choice
Installation guide
Step 1: Open a horizontal square hole by size in the
wall.
Step 2: Put the embedded box into the wall hole;
make sure it is in the same plane with the
wall and fix with cement.
Step 3: Remove the cover of the switch / controller,
and then connect the power cable. Fix the
switch / controller to the
embedded box by screw.
Step 4: Put the cover on the
switch/controller, and use
the Special screw to fix
the top cover and switch/
controller. The installation
is completed.
The cover
Screw
Special screw
Operation guide
T
V
TV
Set the line
Enter the setting mode of N86T/N86C: When the
indicator light on the keypad is off, press the
keypad (the indicator light will turn
on) and hold for 10 seconds, and
then, the indicator light starts
flashing for 30 seconds. During
the flashing, connect R86B with
the keypad on N86T / N86C.
Please read R86B Operation
guide for details.
NOTICE: This feature needs
to use with R86B.
Loading...