Nantucket HYANNIS39DBL, TFCFS30, FCFS30B Installation Manual

FIRECLAY FARMSINKS

INSTALLATION PROCEDURES

Typical installation includes:

cabinet support preparation, installation of faucet and drain,

connection of flexible water supply lines, attachment of sink

to cabinet, sizing and installation of drain, supplies

to house water system.

SINK MOUNTING REQUIREMENTS

Whether the sink is used for replacement or new installation,

the cabinet area beneath the sink must be reinforced to provide

sufficient support. The wood support frame for the sink must

support 400 pounds (approximate weight of sink when full

and a garbage disposal installed).

CABINET SUPPORT PREPERATION

Important Note: This installation assumes the use of a custom

cabinet and countertop design. lt is not designed for use with standard

base cabinets or standard countertops. Installation must be performed

by a professional cabinet maker and shall be in accordance with all local

plumbing and building codes requirements.

Mounting Options

Countertop

Flush Mount

Under Countertop

Installation

Above Countertop

Installation

* NOTE: Chinaware dimensions can vary.
Please use the actual size of the sink that
you will be installing in order to determine
the cutout dimensions for your countertop.

1.

FLUSH MOUNT AND

UNDER COUNTERTOP INSTALLATIONS

TOP SURFACE OF SINK & COUNTERTOP
ENSURE LEVEL BEFORE SECURING

HOT AND COLD

SUPPLIES

FRAME
RUNNING FRONT
BOTH SIDES

SINK

COUNTERTOP

SUPPORT
NOMINAL SIZE

FLUSH MOUNT
INSTALLATION
SHOWN

FRAME
RUNNING SIDE
BOTH SIDES