SAFETY DATA SHEET
1. Identification
Nano Cool High Performance CoolantProduct identifier
Other means of identification
SDS number
Part No.
Tariff code
Recommended use
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
Company name
Address
Telephone
E-mail
Contact person
Emergency phone number
NDT16NC
NDT16NC
3402.90.5050
Radiator Additive
None known.
Nano ProMT LLC
7427 Matthews Mint Hill Road, Suite 201
Mint Hill, NC 28227
Not available.
Not available.
Chris Hunter
Not available.
2. Hazard(s) identification
Physical hazards
Health hazards
Environmental hazards
OSHA defined hazards
Label elements
Hazard symbol
Signal word
Hazard statement
Precautionary statement
Prevention
Response
Storage
Disposal
Hazard(s) not otherwise
classified (HNOC)
Supplemental information
Not classified.
Not classified.
Not classified.
Not classified.
None.
None.
The mixture does not meet the criteria for classification.
Observe good industrial hygiene practices.
Wash hands after handling.
Store away from incompatible materials.
Dispose of waste and residues in accordance with local authority requirements.
None known.
None.
3. Composition/information on ingredients
Mixtures
The manufacturer lists no ingredients as hazardous according to OSHA 29 CFR 1910.1200.
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Inhalation
Skin contact
Eye contact
Ingestion
Material name: Nano Cool High Performance Coolant
NDT16NC Version #: 02 Revision date: 08-09-2016 Issue date: 07-21-2016
Move to fresh air. Call a physician if symptoms develop or persist.
Wash off with soap and water. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
Rinse mouth. Get medical attention if symptoms occur.
SDS US
1 / 6
Most important
symptoms/effects, acute and
delayed
Indication of immediate
medical attention and special
treatment needed
General information
Direct contact with eyes may cause temporary irritation.
Treat symptomatically.
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
5. Fire-fighting measures
Suitable extinguishing media
Unsuitable extinguishing
media
Specific hazards arising from
the chemical
Special protective equipment
and precautions for firefighters
Fire fighting
equipment/instructions
Specific methods
General fire hazards
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Move containers from fire area if you can do so without risk.
Use standard firefighting procedures and consider the hazards of other involved materials.
No unusual fire or explosion hazards noted.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures
Methods and materials for
containment and cleaning up
Keep unnecessary personnel away. For personal protection, see section 8 of the SDS.
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product
recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Environmental precautions
Avoid discharge into drains, water courses or onto the ground.
7. Handling and storage
Precautions for safe handling
Conditions for safe storage,
including any incompatibilities
Observe good industrial hygiene practices.
Store in original tightly closed container. Store away from incompatible materials (see Section 10
of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits
Biological limit values
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Eye/face protection
Skin protection
Hand protection
Other
Respiratory protection
Thermal hazards
No exposure limits noted for ingredient(s).
No biological exposure limits noted for the ingredient(s).
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Wear safety glasses with side shields (or goggles).
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
Wear suitable protective clothing.
Chemical respirator with organic vapor cartridge and full facepiece if threshold limits are exceeded.
Dust mask.
Wear appropriate thermal protective clothing, when necessary.
Material name: Nano Cool High Performance Coolant
NDT16NC Version #: 02 Revision date: 08-09-2016 Issue date: 07-21-2016
SDS US
2 / 6
General hygiene
considerations
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Form
Color
Odor
Odor threshold
pH
Melting point/freezing point
Initial boiling point and boiling
range
Flash point
Evaporation rate
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Flammability limit - upper
(%)
Explosive limit - lower (%)
Explosive limit - upper (%)
Vapor pressure
Vapor density
Relative density
Solubility(ies)
Solubility (water)
Partition coefficient
(n-octanol/water)
Auto-ignition temperature
Decomposition temperature
Viscosity
Other information
Density
Explosive properties
Oxidizing properties
Percent volatile
Specific gravity
VOC
Liquid.
Liquid.
Not available.
Not available.
Not available.
Not available.
32 °F (0 °C)
212 °F (100 °C)
No Flash Point
Not available.
Not applicable.
Not available.
Not available.
Not available.
Not available.
0.00001 hPa estimated
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
8.34 lbs/gal
Not explosive.
Not oxidizing.
99.6 % estimated
1 estimated
0 % w/w
10. Stability and reactivity
Reactivity
Chemical stability
Possibility of hazardous
reactions
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
Material name: Nano Cool High Performance Coolant
NDT16NC Version #: 02 Revision date: 08-09-2016 Issue date: 07-21-2016
The product is stable and non-reactive under normal conditions of use, storage and transport.
Material is stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Contact with incompatible materials.
Strong oxidizing agents.
No hazardous decomposition products are known.
SDS US
3 / 6
11. Toxicological information
Inhalation
Skin contact
Eye contact
Ingestion
Acute toxicity
Respiratory sensitization
Carcinogenicity
Aspiration hazard
Information on likely routes of exposure
No adverse effects due to inhalation are expected.
No adverse effects due to skin contact are expected.
Direct contact with eyes may cause temporary irritation.
Expected to be a low ingestion hazard.
Symptoms related to the
physical, chemical and
toxicological
characteristics
Information on toxicological effects
Skin corrosion/irritation
Serious eye damage/eye
irritation
Respiratory or skin sensitization
Skin sensitization
Germ cell mutagenicity
IARC Monographs. Overall Evaluation of Carcinogenicity
Not listed.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not regulated.
US. National Toxicology Program (NTP) Report on Carcinogens
Not listed.
Reproductive toxicity
Specific target organ
toxicity - single exposure
Specific target organ
toxicity - repeated
exposure
Direct contact with eyes may cause temporary irritation.
Not available.
Prolonged skin contact may cause temporary irritation.
Direct contact with eyes may cause temporary irritation.
Not a respiratory sensitizer.
This product is not expected to cause skin sensitization.
No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
This product is not expected to cause reproductive or developmental effects.
Not classified.
Not classified.
Not an aspiration hazard.
12. Ecological information
Ecotoxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Other adverse effects
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
No data is available on the degradability of this product.
No data available.
No data available.
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Disposal instructions
Local disposal regulations
Hazardous waste code
Waste from residues / unused
products
Contaminated packaging
Material name: Nano Cool High Performance Coolant
NDT16NC Version #: 02 Revision date: 08-09-2016 Issue date: 07-21-2016
Collect and reclaim or dispose in sealed containers at licensed waste disposal site.
Dispose in accordance with all applicable regulations.
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or
disposal.
SDS US
4 / 6
14. Transport information
DOT
Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
Transport in bulk according to
Not established.
Annex II of MARPOL 73/78 and
the IBC Code
15. Regulatory information
US federal regulations
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
CERCLA Hazardous Substance List (40 CFR 302.4)
Not listed.
SARA 304 Emergency release notification
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not regulated.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories
SARA 302 Extremely hazardous substance
Not listed.
SARA 311/312 Hazardous
chemical
SARA 313 (TRI reporting)
Not regulated.
This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard
Communication Standard, 29 CFR 1910.1200.
Immediate Hazard - No
Delayed Hazard - No
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - No
No
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Safe Drinking Water Act
Not regulated.
(SDWA)
US state regulations
US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100)
Not listed.
US. Massachusetts RTK - Substance List
Not regulated.
US. New Jersey Worker and Community Right-to-Know Act
Not listed.
US. Pennsylvania Worker and Community Right-to-Know Law
Not listed.
US. Rhode Island RTK
Not regulated.
US. California Proposition 65
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain
any chemicals currently listed as carcinogens or reproductive toxins.
Material name: Nano Cool High Performance Coolant
NDT16NC Version #: 02 Revision date: 08-09-2016 Issue date: 07-21-2016
SDS US
5 / 6
International Inventories
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
Country(s) or region Inventory name On inventory (yes/no)*
Substances (EINECS)
(PICCS)
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
country(s).
16. Other information, including date of preparation or last revision
Issue date
Revision date
Version #
HMIS® ratings
NFPA ratings
NFPA ratings
07-21-2016
08-09-2016
02
Health: 0
Flammability: 0
Physical hazard: 0
Health: 0
Flammability: 0
Instability: 0
0
00
NoAustralia Australian Inventory of Chemical Substances (AICS)
NoCanada Domestic Substances List (DSL)
NoCanada Non-Domestic Substances List (NDSL)
NoChina Inventory of Existing Chemical Substances in China (IECSC)
YesEurope European Inventory of Existing Commercial Chemical
NoEurope European List of Notified Chemical Substances (ELINCS)
NoJapan Inventory of Existing and New Chemical Substances (ENCS)
NoKorea Existing Chemicals List (ECL)
NoNew Zealand New Zealand Inventory
YesPhilippines Philippine Inventory of Chemicals and Chemical Substances
YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory
Disclaimer
Revision information
The information provided in this Safety Data Sheet is correct to the best of our knowledge,
information and belief at the date of its publication. The information given is designed only as a
guidance for safe handling, use, processing, storage, transportation, disposal and release and is
not to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
Product and Company Identification: Tariff Codes
HazReg Data: International Inventories
Material name: Nano Cool High Performance Coolant
NDT16NC Version #: 02 Revision date: 08-09-2016 Issue date: 07-21-2016
SDS US
6 / 6
Loading...