Nano Pro MT NDT14GR User Manual
SAFETY DATA SHEET
1. Identification
Nano High Temp/Extreme Pressure GreaseProduct identifier
Other means of identification
SDS number
Part No.
Tariff code
Recommended use
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
Company name
Address
Telephone
E-mail
Contact person
Emergency phone number
NDT14GR
NDT14GR
2710.19.4000
Industrial Grease
No other uses are advised.
Nano ProMT LLC
7427 Matthews Mint Hill Road, Suite 201
Mint Hill, NC 28227
Not available.
Not available.
Chris Hunter
Not available.
2. Hazard(s) identification
Physical hazards
Health hazards
Environmental hazards
OSHA defined hazards
Label elements
Hazard symbol
Signal word
Hazard statement
Precautionary statement
Prevention
Response
Storage
Disposal
Hazard(s) not otherwise
classified (HNOC)
Supplemental information
Not classified.
Not classified.
Not classified.
Not classified.
None.
None.
The mixture does not meet the criteria for classification.
Observe good industrial hygiene practices.
Wash hands after handling.
Store away from incompatible materials.
Dispose of waste and residues in accordance with local authority requirements.
None known.
None.
3. Composition/information on ingredients
Mixtures
CAS number %Common name and synonymsChemical name
Nano High Temp/Extreme Pressure
Grease
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
Mixture
100
4. First-aid measures
Inhalation
Skin contact
Eye contact
Material name: Nano High Temp/Extreme Pressure Grease
NDT14GR Version #: 02 Revision date: 08-09-2016 Issue date: 05-02-2016
Move to fresh air. Call a physician if symptoms develop or persist.
Wash off with soap and water. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
SDS US
1 / 7
Ingestion
ACGIH
U.S. - WEEL
Most important
symptoms/effects, acute and
delayed
Indication of immediate
medical attention and special
treatment needed
General information
Rinse mouth. Get medical attention if symptoms occur.
Direct contact with eyes may cause temporary irritation.
Treat symptomatically.
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
5. Fire-fighting measures
Suitable extinguishing media
Unsuitable extinguishing
media
Specific hazards arising from
the chemical
Special protective equipment
and precautions for firefighters
Fire fighting
equipment/instructions
Specific methods
General fire hazards
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Move containers from fire area if you can do so without risk.
Use standard firefighting procedures and consider the hazards of other involved materials.
No unusual fire or explosion hazards noted.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures
Methods and materials for
containment and cleaning up
Environmental precautions
Keep unnecessary personnel away. For personal protection, see section 8 of the SDS.
Stop the flow of material, if this is without risk. Following product recovery, flush area with water.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Avoid discharge into drains, water courses or onto the ground.
7. Handling and storage
Precautions for safe handling
Conditions for safe storage,
including any incompatibilities
Avoid prolonged exposure. Observe good industrial hygiene practices.
Store in original tightly closed container. Keep out of the reach of children. Store away from
incompatible materials (see Section 10 of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits
TWA 0.5 mg/m3Nano High Temp/Extreme
Pressure Grease
Ceiling 1.8 mg/m3Nano High Temp/Extreme
Pressure Grease
Biological limit values
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Eye/face protection
Skin protection
Hand protection
No biological exposure limits noted for the ingredient(s).
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Wear safety glasses with side shields (or goggles).
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
ValueMaterial Type
ValueMaterial Type
Material name: Nano High Temp/Extreme Pressure Grease
NDT14GR Version #: 02 Revision date: 08-09-2016 Issue date: 05-02-2016
SDS US
2 / 7
Other
Respiratory protection
Wear suitable protective clothing.
Chemical respirator with organic vapor cartridge and full facepiece if threshold limits are exceeded.
Dust mask.
Thermal hazards
General hygiene
considerations
Wear appropriate thermal protective clothing, when necessary.
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Form
Color
Odor
Odor threshold
pH
Melting point/freezing point
Initial boiling point and boiling
range
Flash point
Evaporation rate
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Flammability limit - upper
(%)
Explosive limit - lower (%)
Explosive limit - upper (%)
Vapor pressure
Vapor density
Relative density
Solubility(ies)
Solubility (water)
Partition coefficient
(n-octanol/water)
Auto-ignition temperature
Decomposition temperature
Viscosity
Other information
Explosive properties
Flammability class
Oxidizing properties
Specific gravity
VOC
Paste.
Not available.
Liquid. Paste.
Red
Slight. hydrocarbon
Not available.
Not available.
Not available.
Not available.
400.0 °F (204.4 °C) Cleveland Open Cup
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
< 0.13 kPa @ ambient temperature
< 1
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
Not explosive.
Combustible IIIB estimated
Not oxidizing.
0.87
1 % w/w ASTM D-972
10. Stability and reactivity
Reactivity
Chemical stability
Possibility of hazardous
reactions
Conditions to avoid
Incompatible materials
Material name: Nano High Temp/Extreme Pressure Grease
NDT14GR Version #: 02 Revision date: 08-09-2016 Issue date: 05-02-2016
The product is stable and non-reactive under normal conditions of use, storage and transport.
Material is stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Contact with incompatible materials.
Strong oxidizing agents.
SDS US
3 / 7
Loading...