Nano High Pressure Marine GreaseProduct identifier
Other means of identification
SDS number
Part No.
Tariff code
Recommended use
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
Company name
Address
Telephone
E-mail
Contact person
Emergency phone number
NDT120MG
NDT120MG
2710.19.4000
Marine Grease
No other uses are advised.
Nano ProMT LLC
7427 Matthews Mint Hill Road, Suite 201
Mint Hill, NC 28227
Not available.
Not available.
Chris Hunter
(704) 408-3641
2. Hazard(s) identification
Physical hazards
Health hazards
Environmental hazards
OSHA defined hazards
Label elements
Hazard symbol
Signal word
Hazard statement
Precautionary statement
Prevention
Response
Storage
Disposal
Hazard(s) not otherwise
classified (HNOC)
Supplemental information
Not classified.
Not classified.
Not classified.
Not classified.
None.
None.
The mixture does not meet the criteria for classification.
Observe good industrial hygiene practices.
Wash hands after handling.
Store away from incompatible materials.
Dispose of waste and residues in accordance with local authority requirements.
None known.
None.
3. Composition/information on ingredients
Mixtures
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Inhalation
Skin contact
Eye contact
Ingestion
Material name: Nano High Pressure Marine Grease
NDT120MG Version #: 01 Issue date: 03-16-2017
MixtureNano High Pressure Marine Grease90 - 100
Move to fresh air. Call a physician if symptoms develop or persist.
Wash off with soap and water. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
Rinse mouth. Get medical attention if symptoms occur.
SDS US
1 / 6
Most important
ACGIH
symptoms/effects, acute and
delayed
Indication of immediate
medical attention and special
treatment needed
General information
Direct contact with eyes may cause temporary irritation.
Treat symptomatically.
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
5. Fire-fighting measures
Suitable extinguishing media
Unsuitable extinguishing
media
Specific hazards arising from
the chemical
Special protective equipment
and precautions for firefighters
Fire fighting
equipment/instructions
Specific methods
General fire hazards
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Move containers from fire area if you can do so without risk.
Use standard firefighting procedures and consider the hazards of other involved materials.
No unusual fire or explosion hazards noted.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures
Methods and materials for
containment and cleaning up
Environmental precautions
Keep unnecessary personnel away. For personal protection, see section 8 of the SDS.
Stop the flow of material, if this is without risk. Following product recovery, flush area with water.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Avoid discharge into drains, water courses or onto the ground.
7. Handling and storage
Precautions for safe handling
Conditions for safe storage,
including any incompatibilities
Avoid prolonged exposure. Observe good industrial hygiene practices.
Store in original tightly closed container. Store away from incompatible materials (see Section 10
of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits
Type
Ceiling5 mg/m3MistNano High Pressure Marine
Grease
Biological limit values
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Eye/face protection
Skin protection
Hand protection
Other
Respiratory protection
Thermal hazards
No biological exposure limits noted for the ingredient(s).
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Wear safety glasses with side shields (or goggles).
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
Wear suitable protective clothing.
Chemical respirator with organic vapor cartridge and full facepiece if threshold limits are exceeded.
Dust mask.
Wear appropriate thermal protective clothing, when necessary.
ValueMaterial
Form
Material name: Nano High Pressure Marine Grease
NDT120MG Version #: 01 Issue date: 03-16-2017
SDS US
2 / 6
General hygiene
considerations
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Form
Color
Odor
Odor threshold
pH
Melting point/freezing point
Initial boiling point and boiling
range
Flash point
Evaporation rate
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Flammability limit - upper
(%)
Explosive limit - lower (%)
Explosive limit - upper (%)
Vapor pressure
Vapor density
Relative density
Solubility(ies)
Solubility (water)
Partition coefficient
(n-octanol/water)
Auto-ignition temperature
Decomposition temperature
Viscosity
Other information
Explosive properties
Flammability class
Oxidizing properties
Specific gravity
VOC
Paste.
Not available.
Paste.
Red
Slight. hydrocarbon
Not available.
Not available.
Not available.
Not available.
400.0 °F (204.4 °C) Cleveland Open Cup
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
< 0.13 kPa @ ambient temperature
< 1
Not available.
Not available.
Not available.
Not available.
Not available.
Not available.
Not explosive.
Combustible IIIB estimated
Not oxidizing.
0.87
1 % w/w ASTM D-972
10. Stability and reactivity
Reactivity
Chemical stability
Possibility of hazardous
reactions
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
Material name: Nano High Pressure Marine Grease
NDT120MG Version #: 01 Issue date: 03-16-2017
The product is stable and non-reactive under normal conditions of use, storage and transport.
Material is stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Contact with incompatible materials.
Strong oxidizing agents.
No hazardous decomposition products are known.
SDS US
3 / 6
11. Toxicological information
Inhalation
Skin contact
Eye contact
Ingestion
Acute toxicity
Skin / Primary irritation index - Intact
Eye
Respiratory sensitization
Carcinogenicity
Aspiration hazard
Chronic effects
Information on likely routes of exposure
Prolonged inhalation may be harmful.
No adverse effects due to skin contact are expected.
Direct contact with eyes may cause temporary irritation.
Expected to be a low ingestion hazard.
Symptoms related to the
physical, chemical and
toxicological characteristics
Information on toxicological effects
Nano High Pressure Marine Grease
Acute
Dermal
LD50Rat> 3000 mg/kg Expected to be low toxicity
* Estimates for product may be based on additional component data not shown.
Skin corrosion/irritation
0, Expected to be slightly irritating.
Serious eye damage/eye
irritation
Direct contact with eyes may cause temporary irritation.
Prolonged skin contact may cause temporary irritation.
Direct contact with eyes may cause temporary irritation.
Test ResultsProductSpecies
0, Expected to be slightly irritating
Respiratory or skin sensitization
Not a respiratory sensitizer.
0, Not Determined
Skin sensitization
Germ cell mutagenicity
This product is not expected to cause skin sensitization.
No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
0, Not expected to be carcinogenic as it contains severely
hydrotreated mineral oils which are reported to be
non-carcinogenic in lab animal studies.
IARC Monographs. Overall Evaluation of Carcinogenicity
US. National Toxicology Program (NTP) Report on Carcinogens
Not listed.
Reproductive toxicity
Specific target organ toxicity -
This product is not expected to cause reproductive or developmental effects.
Not classified.
single exposure
Specific target organ toxicity -
Not classified.
repeated exposure
Not likely, due to the form of the product.
0, Not expected to be aspiration hazard
Prolonged inhalation may be harmful.
12. Ecological information
Ecotoxicity
Persistence and degradability
Bioaccumulative potential
Material name: Nano High Pressure Marine Grease
NDT120MG Version #: 01 Issue date: 03-16-2017
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
No data is available on the degradability of this product.
No data available.
SDS US
4 / 6
Mobility in soil
Other adverse effects
0, Product contains the components that have been classified non-volatile in nature and therefore
not expected to release to the environment in significant quantities.
No data available.
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Disposal instructions
Local disposal regulations
Hazardous waste code
Waste from residues / unused
products
Contaminated packaging
Collect and reclaim or dispose in sealed containers at licensed waste disposal site.
Dispose in accordance with all applicable regulations.
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or
disposal.
14. Transport information
DOT
Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
Transport in bulk according to
Annex II of MARPOL 73/78 and
the IBC Code