Nano Pro MT NDT120HTHP User Manual

SAFETY DATA SHEET

CAS number

%

Chemical name

Common name and synonyms

1. Identification

Nano High Temperature High Pressure GreaseProduct identifier

Other means of identification

SDS number

Part No.

Tariff code

Recommended use

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information
Manufacturer

Company name
Address

Telephone
E-mail
Contact person

Emergency phone number

NDT120HTHP

NDT120HTHP

2710.19.4000

Industrial Grease

No other uses are advised.

Nano ProMT LLC
7427 Matthews Mint Hill Road, Suite 201
Mint Hill, NC 28227
Not available.
Not available.
Chris Hunter
[phone]

2. Hazard(s) identification

Physical hazards

Health hazards

Environmental hazards

OSHA defined hazards

Label elements

Hazard symbol

Signal word

Hazard statement

Precautionary statement

Prevention

Response

Storage

Disposal

Hazard(s) not otherwise
classified (HNOC)

Supplemental information

Not classified.

Not classified.

Not classified.

Not classified.

None.

None.

The mixture does not meet the criteria for classification.

Observe good industrial hygiene practices.

Wash hands after handling.

Store away from incompatible materials.

Dispose of waste and residues in accordance with local authority requirements.

None known.

None.

3. Composition/information on ingredients

Mixtures

Pressure Grease

*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.

4. First-aid measures

Inhalation

Skin contact

Eye contact

Ingestion

Material name: Nano High Temperature High Pressure Grease

NDT120HTHP Version #: 01 Issue date: 03-16-2017

MixtureNano High Temperature High

Move to fresh air. Call a physician if symptoms develop or persist.

Wash off with soap and water. Get medical attention if irritation develops and persists.

Rinse with water. Get medical attention if irritation develops and persists.

Rinse mouth. Get medical attention if symptoms occur.

90 - 100

SDS US

1 / 6

Most important

ACGIH

U.S. - WEEL

symptoms/effects, acute and
delayed

Indication of immediate
medical attention and special
treatment needed

General information

Direct contact with eyes may cause temporary irritation.

Treat symptomatically.

Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.

5. Fire-fighting measures

Suitable extinguishing media

Unsuitable extinguishing
media

Specific hazards arising from
the chemical

Special protective equipment
and precautions for firefighters

Fire fighting
equipment/instructions

Specific methods

General fire hazards

Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).

Do not use water jet as an extinguisher, as this will spread the fire.

During fire, gases hazardous to health may be formed.

Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

Move containers from fire area if you can do so without risk.

Use standard firefighting procedures and consider the hazards of other involved materials.

No unusual fire or explosion hazards noted.

6. Accidental release measures

Personal precautions,
protective equipment and
emergency procedures

Methods and materials for
containment and cleaning up

Environmental precautions

Keep unnecessary personnel away. For personal protection, see section 8 of the SDS.

Stop the flow of material, if this is without risk. Following product recovery, flush area with water.

Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Avoid discharge into drains, water courses or onto the ground.

7. Handling and storage

Precautions for safe handling

Conditions for safe storage,
including any incompatibilities

Avoid prolonged exposure. Observe good industrial hygiene practices.

Store in original tightly closed container. Keep out of the reach of children. Store away from
incompatible materials (see Section 10 of the SDS).

8. Exposure controls/personal protection

Occupational exposure limits

TWA 0.5 mg/m3Nano High Temperature

High Pressure Grease

Ceiling 1.8 mg/m3Nano High Temperature

High Pressure Grease

Biological limit values

Appropriate engineering
controls

Individual protection measures, such as personal protective equipment

Eye/face protection

Skin protection

Hand protection

Other

No biological exposure limits noted for the ingredient(s).

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.

Wear safety glasses with side shields (or goggles).

Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.

Wear suitable protective clothing.

ValueMaterial Type

ValueMaterial Type

Material name: Nano High Temperature High Pressure Grease

NDT120HTHP Version #: 01 Issue date: 03-16-2017

SDS US

2 / 6