Namco Controls EB200, EB600, EB450, EB710 Product Flyer

Industry-Proven Solenoids

EB200 Series

The EB200 series industrial solenoids are
available in standard base and side mountings
and have stainless steel saddle type retainers.
They are available in stacking widths of 1/2, 3/4,
1 and 1-1/4 inches. Standard versions available
for 115, 230, 460V, 60 Hz.

Features include:

• 1/2 inch stroke

• 115, 230, and 460V, 60 Hz models

• 2 to 10 pound pull or push force

• Standard side and base mounting

• 1-1/2" long stainless steel round loose push
pin available at additional charge

• Captive pin is also available at additional cost.
(Pin has head or shoulder which serves to
hold it in place in the solenoid.)

• -10°C to 30°C ambient environment

• Rated for continuous duty

EB450 Series

Series EB450 solenoids are available with pull
and push force of 7 to 11 pounds and a stroke
up to 1 inch. The EB450 series is rated for
continuous duty. Available in stacking widths of
3/4 and 1 inch. They are designed with stainless
steel saddle stops. All models have through
holes in stack for mounting.

Features include:

• 1 inch stroke

• 115, 460V, 60 Hz standard

• 7 to 11 pound pull or push force

• -10°C to 30°C ambient environment

• Rated for continuous duty

EB600 Series

Series EB600 solenoids are available in pull or push
versions with stacking widths of
1/2, 3/4 and 1. Designed with stainless steel saddle stops
and have .5 inch stroke maximum. All models have
through holes in stack for mounting.

Features include:

• .5 inch stroke

• 115, 230, 60 Hz

• 3 to 8 pound pull or push force

• -10°C to 30°C ambient environment

• Rated for continuous service

EB710 Series

The EB710 series industrial solenoids are designed for use

in Class B insulation systems with ambient temperatures
ranging from

-10°C to 30°C with occasional excursions to 40°C. They
are available in stacking widths of 1/4, 1, 1-1/4 and 2
inches and feature universal mounting brackets. They can
be equipped with special coils to enable them to function
under a wide range of severe industrial environments.

Features include:

• 10 to 30 pound push or pull force

• Stainless steel saddle-type retainers

• 115, 230, and 460, 60 Hz model

• 1 inch stroke

• -10°C to 30°C ambient environment

• Rated for continuous duty
The EB710 series is intended to replace the EB700 series.

Call or write for your free 18-page

Namco Solenoid catalog.

320