Namco Controls EA770 Catalog Page

Single Pole
Standard Environment
(Super Sealed)

Limit
Switches

Butt
Contacts

• Multiple Contacts — SPDT

• Epoxy Sealed

• Generous Overtravel

• Heavy Duty Cam Operated

• Flexibility of Motion CW ,
CCW and CW/CCW

Limit Switches

Wide range of operation...modular

construction...practical flexibility.

The Series EA770 Super Sealed
Water & Oil Tight Snap-Lock Limit
Switches are the “ultimate” of the
industry. By incorporating the moisture
seal with these switches, trouble caused
by water, soluble oils or condensation
has been eliminated. The scope of
models is tailored to meet today’s rugged
requirements...there is a model of size
and type to meet virtually all demands.

Besides covering all functional
requirements, this line is designed to
meet practically every condition of
installation. These Snap-Lock Switches
provide reliable “machine-life” service
and have the stamina to operate under
unusual conditions...at the same time
giving millions of consistently fast,
accurate contacts.

Here are a few of the outstanding
features built into the switch for maxi­mum performance. Generous overtravel
and by-pass, flexibility of motion, fast
contact action, and Form Z contact
arrangement.

Options Available

• Low temperature (-40°C to +90°C)
components and lubricants.

• A variety of levers can be ordered
from Namco Controls Series EL.
NOTE: Levers must be ordered as
separate item. See pages 294-301.

• Basic design permits mounting from
either side or back. Style L or W
mounting plates, for back mounting.

252

EA770 Single Pole 1 N.O. - 1 N.C. / Butt Contacts / Cam Action

Angle Angle Angle Angle Angle Angle
Standard Wide Long A B C D E F
Mounting Mounting Mounting Dir. Of Trip Reset Recom. Total Min. Travel Overall Torque Contact

Model No. Model No. Model No. Operation Travel Travel Travel Travel to Maintain Travel (inch lbs) Config.

STANDARD TRAVEL

EA770-10000 EA770-40000 EA770-70000 CW 18° 14° 30° 90° --15A
EA770-10001 EA770-40001 EA770-70001 CCW 18° 14° 30° 90° --15B
EA770-10100 EA770-40100 EA770-70100 CW/CCW 18° 14° 30° 90° --15C

See Operating Levers Section

Namco Controls Corporation • Mayfield Village, OH 44143 • [phone] • Fax: [phone]

Common Switch Characteristics

SINGLE POLE, STANDARD (SUPER-SEALED) ENVIRONMENT,

BUTT CONTACTS

NEMA Enclosure Type 1, 4, 6, 13
Housing Material Zinc

Ambient Temperature Range* -20°C to +90°C
Shipping Weight 3 lbs. approx.
Lever Adjustment 7°30' Increments Thru 360°
Contacts Butt, Silver Alloy, Form Z
Lead Wires** 4 lead wires, part no. shown

is for 15 ft.

*Some low temperature (-40°C to +90°C) versions available. Contact factory.
**Available in increments of 5 ft. Contact factory.

Continuous Current Rating - Amperes

VOLTAGE AC DC

125 20.0 5.0
250 15.0 1.5
480 10.0 ­600 5.0 -

75-100% Power Factor

Dimensions and Mounting

STANDARD MOUNTING PLATE

3.19"

(81.0)

0.92"

(23.4)

1.06"

(26.9)

5.19"

(131.8)

0.13"
(3.3)

1.59"

(40.4)

1/4–20 Thd.

0.38 Deep
Four Holes

2.50"

(63.5)

WIDE MOUNTING PLATE

0.53"

(13.5)

0.50"

(12.7)

0.69"

(17.5)

0.88"

(22.4)

48 Serrations
Equally Spaced

0.495/0.490 O.D.

1.31"

(33.3)

3.00"

(76.2)

1.13"

2.25"

(28.4)

(57.2)

2.28" (57.9)

0.260/0.255 Dia.
Four Holes

0.28"
(7.1)

EA770

1.06"

(26.9)

0.44"

(11.1)

4.13"

(104.9)

3.06"

(77.7)

2.63"

(66.8)

0.75"-14-N.P.S.
for EA770-1, 4, 7

0.02"

(0.51)

Limit Switches

Contact Configurations

CIRCUIT A

D
B

Initial

C
A

CW

CIRCUIT B

D
B

Initial

C
A

CW

CIRCUIT C

D
B

Initial

C
A

CW

Operational Data Drawings

C

C

A

A

B

D

B

CCW

CCW

CCW

D

LONG MOUNTING PLATE

0.66"

(16.8)

2.81"

(71.4)

3.25"

(82.6)

0.260/0.255 Dia.
Four Holes

1.81"

(46.0)

2.25"

(57.2)

0.41"
(10.4)

4.22"

(107.2)

0.22"
(5.6)

2.44"
(62.0)

0.22"
(5.6)

4.84"

(122.9)

3.00"

(76.2)

Namco Controls Corporation

Mayfield Village, OH 44143

[phone] • FAX [phone] • namcocontrols.com

For technical assistance, call 1-800-NAMTECH

253

Miscellaneous

Operating

Butt

Types

0.50"

(12.7)

Limit Switches

0.25"
(6.4)

Standard Operating Lever

EL010-53420 (D-1260)
(for .500 Dia. Shaft Switches)

Levers

1.50"

(38.1)

0.88"

(22.2)

Contacts

For Series:
EA040, EA060, EA080,
EA130, EA140, EA170,
EA700, EA710, EA730,
EA760, EA770, EA780,
EA790, EA800, EA880,
EA990

Select the operating lever for your
application with regards to dimensions
and materials required.

Requests for operating levers not
shown should include lever style and all
pertinent information as to limit switch
number, dimensions, materials, etc.

Depending upon your application,
levers are available in cold rolled steel,
stainless steel, or bronze. Rollers are
available in steel, nylon, Bryl. Cop.,
stainless steel or steel ball bearings.
Please consult materials column of the
lever of your choice.

This style and size operating lever
is considered standard for the majority of
snap-lock switch installations. The
EL010-53420 (D1260) lever is steel with
a nylon roller and a stainless steel roller
pin. Like all snap-lock levers, the serrated
mounting hole matches the serrated lever
shaft of the switches to provide fixed
adjustment of the lever in 7.5° increments.

294

Namco Controls Corporation • Mayfield Village, OH 44143 • [phone] • Fax: [phone]

For Series EA040, 060, 080,
130, 140, 170, 700, 710,
730, 760, 770, 780, 790,
800, 880, 990

L

B

B

A

L

A

Style R - Regular Straight Type

Ordering Numbers Material

Part Number Reference L A B Lever Roller

EL060-50320 D1260BA 3/4 3/4 1/4 C.R.S. C.R.S.
EL060-51319 — 1 3/4 1/4 C.R.S. Bryl. Cop.
EL060-52321 D1260GQ 1-1/4 3/4 1/4 C.R.S. C.R.S.
EL060-53923 D1260BH 1-1/2 1-1/4 1/4 C.R.S. C.R.S.
EL010-53338 DS1260 1-1/2 3/4 1/4 Steel C.R.S.

EL060-53300 — 1-1/2 3/4 1/4 Brass Bryl. Cop.
EL010-53336 — 1-1/2 3/4 1/4 Steel S.S.
EL010-53337 — 1-1/2 3/4 1/4 Steel Bryl. Cop.
EL060-53401 D126ORF 1-1/2 7/8 9/32 Brass Nylon
EL060-53402 — 1-1/2 7/8 9/32 Brass Bryl. Cop.

EL010-53420 D1260 1-1/2 7/8 9/32 Steel Nylon
EL010-53429 D1260Y 1-1/2 7/8 9/32 Steel B.B.
EL060-53536 D1260Z 1-1/2 1 1/4 C.R.S. C.R.S.
EL060-53926 D1260CL 1-1/2 1-3/8 1/4 C.R.S. C.R.S.
EL060-55327 D1260E 2 3/4 1/4 C.R.S. C.R.S.

EL060-55300 — 2 3/4 1/4 C.R.S. Bryl. Cop.
EL060-55520 D1260AC 2 1 1/4 C.R.S. C.R.S.
EL060-55601 — 2 1 1/4 C.R.S. Bryl. Cop.
EL060-55530 D1260RT 2 1 1/4 Brass Bryl. Cop.
EL060-55927 D1260GT 2 1-1/2 1/4 C.R.S. C.R.S.

EL060-50321 D1260BC 2-1/8 3/4 1/4 C.R.S. C.R.S.
EL060-50501 D1260B 2-1/8 1 1/4 C.R.S. C.R.S.
EL060-50334 D1260M 2-1/4 3/4 1/4 C.R.S. C.R.S.
EL060-59300 D1260KC 2-3/8 3/4 1/4 C.R.S. C.R.S.
EL010-56427 D1260K 2-1/2 7/8 9/32 Steel Nylon

EL010-56334 DS1260K 2-1/2 3/4 1/4 Steel C.R.S.
EL010-55421 D1260DF 2-1/2 1 1/4 C.R.S. C.R.S.
EL060-56500 D1260RR 2-1/2 1 1/4 Brass Bryl. Cop.
EL060-56920 D1260CP 2-1/2 1-1/2 1/4 C.R.S. C.R.S.
EL060-50322 D1260BD 2-3/4 3/4 1/4 C.R.S. C.R.S.

EL060-57300 — 2-3/4 3/4 1/4 C.R.S. Bryl. Cop.
EL010-58300 — 3 3/4 1/4 Steel Bryl. Cop.
EL010-58337 DS1260L 3 3/4 1/4 Steel C.R.S.
EL060-58305 — 3 3/4 1/4 Brass Bryl. Cop.
EL010-58400 — 3 7/8 9/32 Steel Bryl. Cop.

EL010-58423 D1260L 3 7/8 9/32 Steel Nylon
EL010-58451 — 3 7/8 9/32 Steel C.R.S.
EL060-58401 — 3 7/8 9/32 Brass Nylon
EL060-58403 D1260VQ 3 7/8 9/32 S.S. Bryl. Cop.
EL010-58521 D1260CJ 3 1 1/4 Steel C.R.S.

EL010-58522 — 3 1 1/4 C.R.S. Bryl. Cop.
EL010-58923 D1260CN 3 1-1/4 1/4 Steel C.R.S.
EL060-58923 — 3 1-1/4 1/4 Brass Steel
EL010-58900 D1260VR 3 1-1/2 1/4 Steel Nylon
EL010-58920 D1260AE 3 1-1/2 1/4 Steel C.R.S.

EL060-58320 D1260BB 3-1/2 3/4 1/4 C.R.S. C.R.S.
EL060-58431 D1260AP 3-1/2 1 1/4 C.R.S. C.R.S.
EL060-58932 — 3-1/2 3/4 1/4 Brass Bryl. Cop.
EL060-58930 — 3-1/2 1-1/2 1/4 Brass Bryl. Cop.
EL060-58326 D1260C 4 3/4 1/4 C.R.S. C.R.S.

EL060-58304 D1260WD 4 3/4 1/4 C.R.S. Bryl. Cop.
EL060-50523 D1260BL 4 1 1/4 C.R.S. C.R.S.
EL060-58925 — 4 1-1/4 1/4 Brass Bryl. Cop.
EL060-58920 D1260AB 4 1-1/2 1/4 C.R.S. C.R.S.
EL060-58901 — 4 1-1/2 9/32 C.R.S. Nylon

EL060-50335 D1260N 5 3/4 1/4 C.R.S. C.R.S.
EL060-50925 D1260BW 5 1-1/2 1/4 C.R.S. C.R.S.
EL060-50305 D1260CQ 6 3/4 1/4 C.R.S. C.R.S.
EL060-50338 — 6 3/4 1/4 C.R.S. Bryl. Cop
EL060-50930 D1260JE 6 1-1/4 1/4 C.R.S. C.R.S.

EL060-50703 D1260KD 6 3 1/4 C.R.S. C.R.S.

EL Series

All dimensions are in inches.

Limit Switches

Namco Controls Corporation

Mayfield Village, OH 44143

[phone] • FAX [phone] • namcocontrols.com

For technical assistance, call 1-800-NAMTECH

295

Miscellaneous

Operating

Butt

Types

Levers

For Series EA040, 060, 080, 130,
140, 170, 700, 710, 730, 760,
770, 780, 790, 800, 880, 990 Only

Limit Switches

L

C

B

Offset lever with straddle-supported roller.

A

Contacts

Style RLO - Regular Lever Offset Type

Ordering Numbers Material

Part Number Reference L A B C Lever Roller

*EL020-53326 D1260GX 1-1/2 3/4 1/4 1-1/4 Mang. Br. Steel
*EL020-53325 D1260GU 1-1/2 3/4 1/4 1-3/16 Mang. Br. Steel
EL020 55327 D1260HZ 2 3/4 1/4 1-1/8 Mang. Br. Steel
*EL020-55300 D1260JD 2 3/4 1/4 1-1/2 Mang. Br. Steel
EL020-56320 D1260BT 2-1/2 3/4 1/4 1 Mang. Br. Steel

*EL020-56321 D1260DW 2-1/2 3/4 1/4 2-1/4 Mang. Br. Steel
EL020-56421 D1260DG 2-1/2 1 1/4 1 Mang. Br. Steel
EL020-58922 D1260FT 3 1-1/4 1/4 1-1/4 Mang. Br. Steel
EL020-58923 — 3 1-1/4 1/4 1-1/4 Mang. Br. S.S.
EL020-59900 D1260AY 5-1/2 1-1/2 1/4 1-3/4 C.R.S. Steel

*On Series EA040/060/080/170, Lever will not clear top of switch when mounted with Roller facing the rear.

L

B

Machined lever with wide roller straddle­supported directly in line with the serrated
mounting hole.

C

B

Lever provides straddle-type support for wide
roller, which is offset from serrated lever
hub. Side toward switch is machined straight.

A

L

A

Style RW - Wide Roller Regular Type

Ordering Numbers Material

Part Number Reference L A B Lever Roller

EL070-53501 D1260AJ 1-1/2 1 1/2 C.R.S. Bryl. Cop.
EL070-50507 D1260CY 1-5/8 1 1/2 C.R.S. Bryl. Cop.
EL070-56921 D1260DY 2-1/2 1-1/4 1/2 C.R.S. Steel
EL060-00024 D1260AL 3 1-1/2 1/2 C.R.S. Steel
EL070-50921 D1260BE 4 1-1/4 1/2 C.R.S. Steel

Style RWO - Wide Roller Offset Type

Ordering Numbers Material

Part Number Reference L A B C Lever Roller

EL080-53329 D1260R 1-1/2 3/4 1/2 3/8 Mang. Br Steel
EL080-53932 D1260P 1-1/2 1-1/2 1/2 3/8 C.R.S. Steel
EL080-55323 D1260FR 2 3/4 1/2 3/8 C.R.S. Steel

EL080-54905 D1260DD 2 1-1/2 1/2 3/8 C.R.S. C.R.S.
EL080-56301 D1260AH 2-1/2 3/4 1/2 3/8 C.R.S. Steel
EL080-56305 — 2-1/2 3/4 1/2 3/8 C.R.S. Bryl. Cop.
EL080-58322 D1260GN 3 3/4 1/2 3/8 C.R.S. Steel

EL080-58901 D1260DE 3 1-1/2 1/2 3/8 C.R.S. Steel
EL080-58906 D1260DZ 3-1/2 1-1/2 1/2 3/8 C.R.S. Steel
EL080-58909 D1260HA 4 1-1/2 1/2 3/8 C.R.S. Steel
EL080-50924 D1260BS 6 1-1/2 1/2 3/8 C.R.S. Steel

296

Namco Controls Corporation • Mayfield Village, OH 44143 • [phone] • Fax: [phone]

For Series EA040, 060, 080, 130,
140, 170, 700, 710, 730, 760,
770, 780, 790, 800, 880, 990 Only

Style S - Side Roller Type

Part Number Reference L A B C Lever Roller

EL150-53303 — 1-1/2 3/4 3/4 7/8 C.R.S. Bryl. Cop.

C

Side supported roller offset on front side
of lever machined with straight sides

C

L

B

A

L

EL150-53301 D1260A 1-1/2 3/4 1/4 5/8 C.R.S. Steel
EL150-53300 D1260DU 1-1/2 3/4 3/4 7/8 C.R.S. Steel
EL150-53901 D1260HV 1-1/2 1-1/4 1/4 5/8 C.R.S. Steel
EL150-55300 — 2 3/4 1/2 3/4 C.R.S. Bryl. Cop.
EL150-55303 D1260DT 2 3/4 1/4 5/8 C.R.S. Steel

EL150-55301 D1260JJ 2 3/4 1/2 3/4 C.R.S. C.R.S.
EL150-56300 D1260DX 2-1/2 3/4 1/4 5/8 C.R.S. C.R.S.
EL150-56500 — 2-1/2 1 1/2 3/4 C.R.S. S.S.
EL150-57300 D1260DO 2-3/4 3/4 1/4 5/8 C.R.S. C.R.S.
EL150-58901 — 4 1-1/4 1/4 5/8 Bronze Nylon
EL150-58902 — 4 1-1/4 1/4 5/8 Bronze Steel

Style SLO - Side Roller Lever Offset Type

Part Number Reference L A B C Lever Roller

EL090-53324 D1260GZ 1-1/2 3/4 1/4 1 Bronze Steel
EL090-53336 — 1-1/2 3/4 1/4 1-3/8 Bronze Nylon
EL090-53321 D1260CT 1-1/2 3/4 1/4 1-3/8 Bronze Steel
EL090-53322 — 1-1/2 3/4 1/4 1-3/8 Bronze Bryl. Cop.
EL090-53328 D1260GV 1-1/2 3/4 1/4 2 Bronze Steel

EL Series

Ordering Numbers Material

Limit Switches

Ordering Numbers Material

B

Right angle offset lever has side­supported roller mounted on end.

B

A

E

D

Angle type rocker arm has both side­supported rollers mounted on same side.

A

†

C

R

Style TS - Two Roller Same Side

Ordering Numbers Material

Part Number Reference R A B C D E Lever Roller

EL040-50327 D1260CM 1-3/8 3/4 1/4 5/8 107°34’ 36° Bronze Steel
EL040-50328 D1260JQ 1-3/8 3/4 1/2 3/4 107°34’ 36° Bronze Steel

†EL040-58904 D1260JH 3 1-1/2 1/2 3/4 150° 15° Bronze Steel
†EL040-58905 — 3 1-1/2 1/2 3/4 150° 15° Bronze Bryl. Cop.

Namco Controls Corporation

Mayfield Village, OH 44143

[phone] • FAX [phone] • namcocontrols.com

For technical assistance, call 1-800-NAMTECH

297

Miscellaneous

Operating

Butt

Types

Levers

For Series EA040, 060, 080, 130,
140, 170, 700, 710, 730, 760,
770, 780, 790, 800, 880, 990 Only

A

B

Limit Switches

E

Angle type rocker lever has side-supported
rollers mounted on opposite sides

C

R

D

Contacts

Style TSO - Two Roller Opposite Side

Ordering Numbers Material

Part Number Reference R A B C D E Lever Roller

EL030-50301 D1260AA 1-3/8 3/4 1/4 3/4 107°34’ 36°13’ Bronze Steel
EL030-50302 D1260DH 1-3/8 3/4 1/2 1 107°34’ 36°13’ Bronze Steel
EL030-52322 D1260DQ 1-1/2 3/4 3/4 1-1/4 90° 45° Bronze Steel

L

R

A

B

Single-loaded lever with straddle-supported roller.
Used where switch action is required in one
direction only—return movement of actuating
mechanism does not operate the switch.

L

D

R

D

A

E

B

Style KR - Knee Action Straight Type

Ordering Numbers Material

Part Number Reference R A B D L Lever Roller

EL100-55401 D1260JM 1 7/8 1/4 90° 2 Steel Steel
EL100-55402 — 1 7/8 1/4 90° 2 Steel Bryl. Cop.
EL100-55403 — 1 7/8 1/4 90° 2 Steel S.S.

Style KRO - Knee Action Offset Type

Ordering Numbers Material

Part Number Reference R A B D E L Lever Roller

EL110-50401 D1260JV 1-1/8 7/8 1/4 41°30’ 67 °30’ 1-7/8 Steel Steel

298

Spring-loaded offset lever with straddle-supported
roller. Used where switch action is required in one
direction only—return movement of actuating
mechanism does not operate switch.

Namco Controls Corporation • Mayfield Village, OH 44143 • [phone] • Fax: [phone]

For Series EA040, 060, 080, 130,
140, 170, 700, 710, 730, 760,
770, 780, 790, 800, 880, 990 Only

A

L

Steel shaft with bakelite knob.

For Series EA700, 710, 730, 760,
770, 780, 790, 800, 880, 990 Only

EL Series

Style M - Manual Type

Ordering Numbers Material

Part Number Reference L A Lever Knob

EL050-58900 D1260EP-3 3 1-3/8 Steel Bakelite
EL050-59901 D1260EP-1 4-1/16 1-3/8 Steel Bakelite
EL050-59900 D1260EP 6-5/16 1-3/8 Steel Bakelite

Limit Switches

B

A

C

Nickel Plate Steel (N.P.S.) Lever Nickel Plated

A

D

E

B

Straight

Ordering Numbers Material

Part Number Reference A B C D E Lever Roller

EL010-62401 SL-160 1-1/2 1/2 7/8 9/32 25/64 Zinc Steel
EL010-63414 SL-160K 1-1/2 1/2 7/8 9/32 25/64 Zinc S.S.
EL010-63415 SL-160N 1-1/2 1/2 7/8 9/32 25/64 Zinc Nylon

Offset

Ordering Numbers Material

Part Number Reference A B C D E Lever Roller

EL020-63412 SL-160C 1-1/2 1/2 7/8 9/32 1-7/16 Zinc Steel
EL020-63414 SL-160L 1-1/2 1/2 7/8 9/32 1-7/16 Zinc Nylon
EL020-63415 SL-160S 1-1/2 1/2 7/8 9/32 1-7/16 Zinc S.S.

C

Lever Nickel Plated

D

E

Namco Controls Corporation

Mayfield Village, OH 44143

[phone] • FAX [phone] • namcocontrols.com

For technical assistance, call 1-800-NAMTECH

299

Miscellaneous

Operating

Butt

Types

Levers

For Series EA700, 710, 730, 760,
770, 780, 790, 800, 880, 990 Only

B

Limit Switches

A

Adjustable

C

E

D

Contacts

Adjustable Straight

Ordering Numbers Material

Part Number Reference A B C D E Lever Roller

EL120-60400 SL-170A 1-3/4-3 21/32 7/8 9/32 11/32 Steel Steel
EL120-60600 SL-170C 1-7/8-3 21/32 2 9/32 11/32 Steel Steel
EL120-69415 SL-170K 1-3/4-3 21/32 7/8 9/32 11/32 Steel Nylon
EL120-69421 SL-170R 3-3/4-5 21/32 7/8 9/32 11/32 Steel Steel
EL120-60601 — 3-3/4-5 21/32 2 9/32 11/32 Steel Steel

A

Adjustable

3/4"

C

1 1/2"

10 1/2"

D

E

1/4" Square

B

Adjustable Offset

Ordering Numbers Material

Part Number Reference A B C D E Lever Roller

EL130-64410 SL-170 1-3/4-3 21/32 7/8 9/32 1-25/32 Steel Steel
EL130-69410 SL-170D 1-3/4-3 21/32 7/8 9/32 1-25/32 Steel Nylon
EL130-69412 SL-170F 1-3/4-3 21/32 7/8 9/32 2-3/8 Steel Steel
EL130-69413 SL-170G 1-3/4-3 21/32 7/8 9/32 3-1/2 Steel Steel

EL130-69414 SL-170J 1-3/4-3 21/32 7/8 9/32 15/16 Steel Steel
*EL130-69411 SL-170E 1-3/4-3 21/32 7/8 9/32 1-9/32 Steel Steel
EL130-20401 — 1-3/4-3 21/32 7/8 17/64 3-1/2 Steel Nylon

*Roller mounted on opposite side

Rod Lever

Ordering Numbers

Part Number Reference Dimensions Material

EL140-69917 SL170M-1 Other rod lengths available to suit requirements Steel Rod

3/4"

300

1/2"

Namco Controls Corporation • Mayfield Village, OH 44143 • [phone] • Fax: [phone]

For Series EA040, 060, 080, 130,
140, 170, 700, 710, 730, 760, 770,
780, 790, 800, 880, 990 Only

A

2"

B

5/8"

3 3/4"

Dia.

1/2"

EL Series

Style VR - Belt Mis-Alignment Lever-Adjustable

“A” “B” “C” Material

Ordering Number (Adjustable) Max. Dia. Lever Roller

C

EL140-58500 4.45/3.82” 8.38” 1.50” Steel Delrin
EL140-58600 4.45/3.82” 8.38” 2.50” Steel Delrin

B

3"

Square Corners Only
EL160-58500

Style YR - Belt Mis-Alignment Lever

“A” “B” “C” Material

A

C

Dia.

Ordering Number Max. Dia. Lever Roller

EL160-58500 2.24” 5.64” 1.25” Steel Nylon
EL160-58600 3.50” 6.90” 2.50” Steel Nylon

Limit Switches

Namco Controls Corporation

Mayfield Village, OH 44143

[phone] • FAX [phone] • namcocontrols.com

For technical assistance, call 1-800-NAMTECH

301