NAMCO Bandai Games 90500084 User Manual

®

™

Operators Manual

IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY

AT

ALL TIMES

Part No. 90500084

, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS

MANUAL

ARE FOLLOWED PRECISELY

.

© 1995 all rights reserved.

No part of this publication may be reproduced by any mechanical, photographic or

electronic process, or in the form of phonographic recording, nor may it be stored in a

retrieval system, transmitted or otherwise copied for public or private use, without

permission from

NAMCO EUROPE LTD.

While the information contained in this manual is given in good faith and was accurate

at the time of publication, NAMCO EUROPE LTD. reserve the right to make changes

and alterations without notice.

This machine has been manufactured in accordance with European Community

directives (1st. January 1996), and as such bears the marking. Any changes or

modifications to this machine must be in accordance with European Community

directives (1st. January 1996).

If you make any unauthorised changes to this product, you may contravene European

Community directives (1st. January 1996)

Published by:
NAMCO EUROPE LTD.
Namco House,
8 Acton Park Estate,
The Vale,
London. W3 7QE

Phone:- 0208-324-6000

Fax:- 0208-324-6010

SAFETY WARNING

In order to use this machine safely, be sure to read this Operators Manual carefully

before installation, adjustment or use of this machine.

Whenever the owner of this machine entrusts disassembly, installation, adjustment,
routine maintenance or trouble shooting to another person, the owner should ensure that
that person read the appropriate precautions and relevant sections of this manual before
starting work.

In order that no accidents occur when the machine is in operation, strictly follow
the notes on safety described below. Also, carefully read section 2, “Precautions”

Warnings for Operation ( Requirements)

NOTE:

NOTE:

Warnings for Disassembly, Installation, Routine Maintenance, and Troubleshooting.

DANGER:

DANGER:

DANGER:

DANGER:

NOTE:

Only operate this machine after checking that it has been installed
correctly and in accordance with the installation and commisioning
manual.

If there is an error or problem with this machine, operation must be
stopped immediately and the problem rectified before further use.

Namco Ltd. bears absolutely no responsibility for accidents or injuries
resulting from unauthorized changes to this machine.
Ensure that the machine has been turned OFF before making
adjustments or carrying out maintenance. Also ensure only qualified
personnel carry out maintenance or turn the power ON to this
machine.
The power supply and inside the monitor will remain hot and have
areas of high voltage even though the machine has been turned OFF,
and there is a possibility of burns or electric shock. Be careful not to
touch these areas.
In order to avoid injuries due to mis-operation, be sure that the
voltage of the main power supply is within the prescribed limits. Also
to prevent possible electric shocks due to failure, this machine MUST
be fitted with a securely connected earthed plug.
Do not turn the power switch ON until the machine has been installed
correctly.

Contents

Operators Manual...................................................................................1

SAFETY W ARNING .................................................................................3

1. SPECIFICATIONS.............................................................................5

2. PRECAUTIONS ................................................................................6

2-1 Cautions When Installing................................................................6

2-2 Cautions when Handling. ...........................................................................6

2-3 Cautions when Transporting. ......................................................................6

2-4 Cautions when handling the PCB...............................................................6

3. ADJUSTMENTS................................................................................7

3-1 Turning on the Power .................................................................................7

3-2 Switches for Adjustment.............................................................................7

3-4 Test Mode...................................................................................................8

3-4-1 Switch Test ....................................................................................8

3-4-2 Sound Test ....................................................................................9

3-4-3 Coin Options................................................................................10

3-4-4 Game Options ............................................................................. 10

3-4-5 Factory Settings...........................................................................11

3-5 PC Board Connectors ..............................................................................12

4. P ARTS.............................................................................................13

5. SCHEMATIC ...................................................................................14

Page 4

1. SPECIFICATIONS

POWER SUPPLY :- 220/240volts AC

COIN ACCEPTOR:- Mars CashFlow - 1 Channel

MONITOR :- Hantarex 28" Polo Colour Monitor with auto degauss.

DIMENSIONS :- 790(w) x 1200(d) x 2080(h)

WEIGHT :- 175kg.

ACCESSORIES :- Keys: (Cash Door).....................2

(Coin Door)......................2

(Back Door) .....................2

IEC Mains Lead ......................................1

Operators Manual...................................1

Monitor Manual.......................................1

2P Attack Horizontal

1P Attack Vertical

1P Attack Horizontal

1P Start

2P Start

2P Attack Vertical

1P 8way Joystick

1P Kick Button

1P Guard Button

2P Guard Button

2P Kick Button

2P 8way Joystick

Page 5